nixpkgs/doc/stdenv/multiple-output.chapter.md

9.7 KiB
Raw Blame History

Multiple-output packages

Introduction

The Nix language allows a derivation to produce multiple outputs, which is similar to what is utilized by other Linux distribution packaging systems. The outputs reside in separate Nix store paths, so they can be mostly handled independently of each other, including passing to build inputs, garbage collection or binary substitution. The exception is that building from source always produces all the outputs.

The main motivation is to save disk space by reducing runtime closure sizes; consequently also sizes of substituted binaries get reduced. Splitting can be used to have more granular runtime dependencies, for example the typical reduction is to split away development-only files, as those are typically not needed during runtime. As a result, closure sizes of many packages can get reduced to a half or even much less.

::: {.note} The reduction effects could be instead achieved by building the parts in completely separate derivations. That would often additionally reduce build-time closures, but it tends to be much harder to write such derivations, as build systems typically assume all parts are being built at once. This compromise approach of single source package producing multiple binary packages is also utilized often by rpm and deb. :::

A number of attributes can be used to work with a derivation with multiple outputs. The attribute outputs is a list of strings, which are the names of the outputs. For each of these names, an identically named attribute is created, corresponding to that output. The attribute meta.outputsToInstall is used to determine the default set of outputs to install when using the derivation name unqualified.

Installing a split package

When installing a package with multiple outputs, the packages meta.outputsToInstall attribute determines which outputs are actually installed. meta.outputsToInstall is a list whose default installs binaries and the associated man pages. The following sections describe ways to install different outputs.

Selecting outputs to install via NixOS

NixOS provides two ways to select the outputs to install for packages listed in environment.systemPackages:

  • The configuration option environment.extraOutputsToInstall is appended to each packages meta.outputsToInstall attribute to determine the outputs to install. It can for example be used to install info documentation or debug symbols for all packages.

  • The outputs can be listed as packages in environment.systemPackages. For example, the "out" and "info" outputs for the coreutils package can be installed by including coreutils and coreutils.info in environment.systemPackages.

Selecting outputs to install via nix-env

nix-env lacks an easy way to select the outputs to install. When installing a package, nix-env always installs the outputs listed in meta.outputsToInstall, even when the user explicitly selects an output.

::: {.warning} nix-env silenty disregards the outputs selected by the user, and instead installs the outputs from meta.outputsToInstall. For example,

$ nix-env -iA nixpkgs.coreutils.info

installs the "out" output (coreutils.meta.outputsToInstall is [ "out" ]) instead of the requested "info". :::

The only recourse to select an output with nix-env is to override the packages meta.outputsToInstall, using the functions described in . For example, the following overlay adds the "info" output for the coreutils package:

self: super:
{
  coreutils = super.coreutils.overrideAttrs (oldAttrs: {
    meta = oldAttrs.meta // { outputsToInstall = oldAttrs.meta.outputsToInstall or [ "out" ] ++ [ "info" ]; };
  });
}

Using a split package

In the Nix language the individual outputs can be reached explicitly as attributes, e.g. coreutils.info, but the typical case is just using packages as build inputs.

When a multiple-output derivation gets into a build input of another derivation, the dev output is added if it exists, otherwise the first output is added. In addition to that, propagatedBuildOutputs of that package which by default contain $outputBin and $outputLib are also added. (See .)

In some cases it may be desirable to combine different outputs under a single store path. A function symlinkJoin can be used to do this. (Note that it may negate some closure size benefits of using a multiple-output package.)

Writing a split derivation

Here you find how to write a derivation that produces multiple outputs.

In nixpkgs there is a framework supporting multiple-output derivations. It tries to cover most cases by default behavior. You can find the source separated in <nixpkgs/pkgs/build-support/setup-hooks/multiple-outputs.sh>; its relatively well-readable. The whole machinery is triggered by defining the outputs attribute to contain the list of desired output names (strings).

outputs = [ "bin" "dev" "out" "doc" ];

Often such a single line is enough. For each output an equally named environment variable is passed to the builder and contains the path in nix store for that output. Typically you also want to have the main out output, as it catches any files that didnt get elsewhere.

::: {.note} There is a special handling of the debug output, described at . :::

“Binaries first”

A commonly adopted convention in nixpkgs is that executables provided by the package are contained within its first output. This convention allows the dependent packages to reference the executables provided by packages in a uniform manner. For instance, provided with the knowledge that the perl package contains a perl executable it can be referenced as ${pkgs.perl}/bin/perl within a Nix derivation that needs to execute a Perl script.

The glibc package is a deliberate single exception to the “binaries first” convention. The glibc has libs as its first output allowing the libraries provided by glibc to be referenced directly (e.g. ${stdenv.glibc}/lib/ld-linux-x86-64.so.2). The executables provided by glibc can be accessed via its bin attribute (e.g. ${stdenv.glibc.bin}/bin/ldd).

The reason for why glibc deviates from the convention is because referencing a library provided by glibc is a very common operation among Nix packages. For instance, third-party executables packaged by Nix are typically patched and relinked with the relevant version of glibc libraries from Nix packages (please see the documentation on patchelf for more details).

File type groups

The support code currently recognizes some particular kinds of outputs and either instructs the build system of the package to put files into their desired outputs or it moves the files during the fixup phase. Each group of file types has an outputFoo variable specifying the output name where they should go. If that variable isnt defined by the derivation writer, it is guessed a default output name is defined, falling back to other possibilities if the output isnt defined.

$outputDev

is for development-only files. These include C(++) headers (include/), pkg-config (lib/pkgconfig/), cmake (lib/cmake/) and aclocal files (share/aclocal/). They go to dev or out by default.

$outputBin

is meant for user-facing binaries, typically residing in bin/. They go to bin or out by default.

$outputLib

is meant for libraries, typically residing in lib/ and libexec/. They go to lib or out by default.

$outputDoc

is for user documentation, typically residing in share/doc/. It goes to doc or out by default.

$outputDevdoc

is for developer documentation. Currently we count gtk-doc and devhelp books, typically residing in share/gtk-doc/ and share/devhelp/, in there. It goes to devdoc or is removed (!) by default. This is because e.g. gtk-doc tends to be rather large and completely unused by nixpkgs users.

$outputMan

is for man pages (except for section 3), typically residing in share/man/man[0-9]/. They go to man or $outputBin by default.

$outputDevman

is for section 3 man pages, typically residing in share/man/man[0-9]/. They go to devman or $outputMan by default.

$outputInfo

is for info pages, typically residing in share/info/. They go to info or $outputBin by default.

Common caveats

  • Some configure scripts dont like some of the parameters passed by default by the framework, e.g. --docdir=/foo/bar. You can disable this by setting setOutputFlags = false;.

  • The outputs of a single derivation can retain references to each other, but note that circular references are not allowed. (And each strongly-connected component would act as a single output anyway.)

  • Most of split packages contain their core functionality in libraries. These libraries tend to refer to various kind of data that typically gets into out, e.g. locale strings, so there is often no advantage in separating the libraries into lib, as keeping them in out is easier.

  • Some packages have hidden assumptions on install paths, which complicates splitting.