nixpkgs/modules/installer/tools/nixos-hardware-scan.pl
Eelco Dolstra f4903be57e * nixos-hardware-scan: detect if we're in a VirtualBox guest and
enable the guest additions in that case.

svn path=/nixos/trunk/; revision=33133
2012-03-16 01:57:23 +00:00

249 lines
6.4 KiB
Perl

#! @perl@/bin/perl -w
use File::Spec;
use File::Basename;
my @attrs = ();
my @kernelModules = ();
my @initrdKernelModules = ();
my @modulePackages = ();
my @requires = ("<nixos/modules/installer/scan/not-detected.nix>");
sub debug {
return unless defined $ENV{"DEBUG"};
print STDERR @_;
}
# Read a file, returning undef if the file cannot be opened.
sub readFile {
my $filename = shift;
my $res;
if (open FILE, "<$filename") {
my $prev = $/;
undef $/;
$res = <FILE>;
$/ = $prev;
close FILE;
chomp $res;
}
return $res;
}
my $cpuinfo = readFile "/proc/cpuinfo";
sub hasCPUFeature {
my $feature = shift;
return $cpuinfo =~ /^flags\s*:.* $feature( |$)/m;
}
# Detect the number of CPU cores.
my $cpus = scalar (grep {/^processor\s*:/} (split '\n', $cpuinfo));
# Virtualization support?
push @kernelModules, "kvm-intel" if hasCPUFeature "vmx";
push @kernelModules, "kvm-amd" if hasCPUFeature "svm";
# Look at the PCI devices and add necessary modules. Note that most
# modules are auto-detected so we don't need to list them here.
# However, some are needed in the initrd to boot the system.
my $videoDriver;
sub pciCheck {
my $path = shift;
my $vendor = readFile "$path/vendor";
my $device = readFile "$path/device";
my $class = readFile "$path/class";
my $module;
if (-e "$path/driver/module") {
$module = basename `readlink -f $path/driver/module`;
chomp $module;
}
debug "$path: $vendor $device $class";
debug " $module" if defined $module;
debug "\n";
if (defined $module) {
# See the bottom of http://pciids.sourceforge.net/pci.ids for
# device classes.
if (# Mass-storage controller. Definitely important.
$class =~ /^0x01/ ||
# Firewire controller. A disk might be attached.
$class =~ /^0x0c00/ ||
# USB controller. Needed if we want to use the
# keyboard when things go wrong in the initrd.
$class =~ /^0x0c03/
)
{
push @initrdKernelModules, $module;
}
}
# broadcom STA driver (wl.ko)
# list taken from http://www.broadcom.com/docs/linux_sta/README.txt
if ($vendor eq "0x14e4" &&
($device eq "0x4311" || $device eq "0x4312" || $device eq "0x4313" ||
$device eq "0x4315" || $device eq "0x4327" || $device eq "0x4328" ||
$device eq "0x4329" || $device eq "0x432a" || $device eq "0x432b" ||
$device eq "0x432c" || $device eq "0x432d" || $device eq "0x4353" ||
$device eq "0x4357" || $device eq "0x4358" || $device eq "0x4359" ) )
{
push @modulePackages, "config.boot.kernelPackages.broadcom_sta";
push @kernelModules, "wl";
}
# Can't rely on $module here, since the module may not be loaded
# due to missing firmware. Ideally we would check modules.pcimap
# here.
push @attrs, "networking.enableIntel2200BGFirmware = true;" if
$vendor eq "0x8086" &&
($device eq "0x1043" || $device eq "0x104f" || $device eq "0x4220" ||
$device eq "0x4221" || $device eq "0x4223" || $device eq "0x4224");
push @attrs, "networking.enableIntel3945ABGFirmware = true;" if
$vendor eq "0x8086" &&
($device eq "0x4229" || $device eq "0x4230" ||
$device eq "0x4222" || $device eq "0x4227");
# Assume that all NVIDIA cards are supported by the NVIDIA driver.
# There may be exceptions (e.g. old cards).
$videoDriver = "nvidia" if $vendor eq "0x10de" && $class =~ /^0x03/;
}
foreach my $path (glob "/sys/bus/pci/devices/*") {
pciCheck $path;
}
# Idem for USB devices.
sub usbCheck {
my $path = shift;
my $class = readFile "$path/bInterfaceClass";
my $subclass = readFile "$path/bInterfaceSubClass";
my $protocol = readFile "$path/bInterfaceProtocol";
my $module;
if (-e "$path/driver/module") {
$module = basename `readlink -f $path/driver/module`;
chomp $module;
}
debug "$path: $class $subclass $protocol";
debug " $module" if defined $module;
debug "\n";
if (defined $module) {
if (# Mass-storage controller. Definitely important.
$class eq "08" ||
# Keyboard. Needed if we want to use the
# keyboard when things go wrong in the initrd.
($class eq "03" && $protocol eq "01")
)
{
push @initrdKernelModules, $module;
}
}
}
foreach my $path (glob "/sys/bus/usb/devices/*") {
if (-e "$path/bInterfaceClass") {
usbCheck $path;
}
}
# Add the modules for all block devices.
foreach my $path (glob "/sys/class/block/*") {
my $module;
if (-e "$path/device/driver/module") {
$module = basename `readlink -f $path/device/driver/module`;
chomp $module;
push @initrdKernelModules, $module;
}
}
if ($videoDriver) {
push @attrs, "services.xserver.videoDrivers = [ \"$videoDriver\" ];";
}
# Check if we're a VirtualBox guest. If so, enable the guest
# additions.
my $dmi = `@dmidecode@/sbin/dmidecode`;
if ($dmi =~ /Manufacturer: innotek/) {
push @attrs, "services.virtualbox.enable = true;"
}
# Generate the configuration file.
sub removeDups {
my %seen;
my @res = ();
foreach my $s (@_) {
if (!defined $seen{$s}) {
$seen{$s} = "";
push @res, $s;
}
}
return @res;
}
sub toNixExpr {
my $res = "";
foreach my $s (@_) {
$res .= " \"$s\"";
}
return $res;
}
sub multiLineList {
my $indent = shift;
my $res = "";
$res = "\n" if scalar @_ > 0;
foreach my $s (@_) {
$res .= "$indent$s\n";
}
return $res;
}
my $initrdKernelModules = toNixExpr(removeDups @initrdKernelModules);
my $kernelModules = toNixExpr(removeDups @kernelModules);
my $modulePackages = toNixExpr(removeDups @modulePackages);
my $attrs = multiLineList(" ", removeDups @attrs);
my $requires = multiLineList(" ", removeDups @requires);
print <<EOF ;
# This is a generated file. Do not modify!
# Make changes to /etc/nixos/configuration.nix instead.
{ config, pkgs, ... }:
{
require = [$requires ];
boot.initrd.kernelModules = [$initrdKernelModules ];
boot.kernelModules = [$kernelModules ];
boot.extraModulePackages = [$modulePackages ];
nix.maxJobs = $cpus;
$attrs}
EOF
# workaround for a bug in substituteAll