nixpkgs/modules/system/activation/switch-to-configuration.pl

313 lines
11 KiB
Perl
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#! @perl@
use strict;
use warnings;
use File::Basename;
use File::Slurp;
use Cwd 'abs_path';
my $restartListFile = "/run/systemd/restart-list";
my $reloadListFile = "/run/systemd/reload-list";
my $action = shift @ARGV;
if (!defined $action || ($action ne "switch" && $action ne "boot" && $action ne "test")) {
print STDERR <<EOF;
Usage: $0 [switch|boot|test]
switch: make the configuration the boot default and activate now
boot: make the configuration the boot default
test: activate the configuration, but don\'t make it the boot default
EOF
exit 1;
}
die "This is not a NixOS installation (/etc/NIXOS is missing)!\n" unless -f "/etc/NIXOS";
# Install or update the bootloader.
if ($action eq "switch" || $action eq "boot") {
system("@installBootLoader@ @out@") == 0 or exit 1;
exit 0 if $action eq "boot";
}
# Check if we can activate the new configuration.
my $oldVersion = read_file("/run/current-system/init-interface-version", err_mode => 'quiet') // "";
my $newVersion = read_file("@out@/init-interface-version");
if ($newVersion ne $oldVersion) {
print STDERR <<EOF;
Warning: the new NixOS configuration has an init that is
incompatible with the current configuration. The new configuration
won\'t take effect until you reboot the system.
EOF
exit 100;
}
# Ignore SIGHUP so that we're not killed if we're running on (say)
# virtual console 1 and we restart the "tty1" unit.
$SIG{PIPE} = "IGNORE";
sub getActiveUnits {
# FIXME: use D-Bus or whatever to query this, since parsing the
# output of list-units is likely to break.
my $lines = `@systemd@/bin/systemctl list-units --full`;
my $res = {};
foreach my $line (split '\n', $lines) {
chomp $line;
last if $line eq "";
$line =~ /^(\S+)\s+(\S+)\s+(\S+)\s+(\S+)\s/ or next;
next if $1 eq "UNIT";
$res->{$1} = { load => $2, state => $3, substate => $4 };
}
return $res;
}
sub parseFstab {
my ($filename) = @_;
my ($fss, $swaps);
foreach my $line (read_file($filename, err_mode => 'quiet')) {
chomp $line;
$line =~ s/#.*//;
next if $line =~ /^\s*$/;
my @xs = split / /, $line;
if ($xs[2] eq "swap") {
$swaps->{$xs[0]} = { options => $xs[3] // "" };
} else {
$fss->{$xs[1]} = { device => $xs[0], fsType => $xs[2], options => $xs[3] // "" };
}
}
return ($fss, $swaps);
}
sub parseUnit {
my ($filename) = @_;
my $info = {};
foreach my $line (read_file($filename)) {
# FIXME: not quite correct.
$line =~ /^([^=]+)=(.*)$/ or next;
$info->{$1} = $2;
}
return $info;
}
sub boolIsTrue {
my ($s) = @_;
return $s eq "yes" || $s eq "true";
}
# Stop all services that no longer exist or have changed in the new
# configuration.
my (@unitsToStop, @unitsToSkip);
my $activePrev = getActiveUnits;
while (my ($unit, $state) = each %{$activePrev}) {
my $baseUnit = $unit;
# Recognise template instances.
$baseUnit = "$1\@.$2" if $unit =~ /^(.*)@[^\.]*\.(.*)$/;
my $prevUnitFile = "/etc/systemd/system/$baseUnit";
my $newUnitFile = "@out@/etc/systemd/system/$baseUnit";
my $baseName = $baseUnit;
$baseName =~ s/\.[a-z]*$//;
if (-e $prevUnitFile && ($state->{state} eq "active" || $state->{state} eq "activating")) {
if (! -e $newUnitFile) {
push @unitsToStop, $unit;
}
elsif ($unit =~ /\.target$/) {
# Cause all active target units to be restarted below.
# This should start most changed units we stop here as
# well as any new dependencies (including new mounts and
# swap devices). FIXME: the suspend target is sometimes
# active after the system has resumed, which probably
# should not be the case. Just ignore it.
if ($unit ne "suspend.target" && $unit ne "hibernate.target") {
my $unitInfo = parseUnit($newUnitFile);
unless (boolIsTrue($unitInfo->{'RefuseManualStart'} // "false")) {
write_file($restartListFile, { append => 1 }, "$unit\n");
}
}
}
elsif (abs_path($prevUnitFile) ne abs_path($newUnitFile)) {
if ($unit eq "sysinit.target" || $unit eq "basic.target" || $unit eq "multi-user.target" || $unit eq "graphical.target") {
# Do nothing. These cannot be restarted directly.
} elsif ($unit =~ /\.mount$/) {
# Reload the changed mount unit to force a remount.
write_file($reloadListFile, { append => 1 }, "$unit\n");
} elsif ($unit =~ /\.socket$/ || $unit =~ /\.path$/) {
# FIXME: do something?
} else {
my $unitInfo = parseUnit($newUnitFile);
if (!boolIsTrue($unitInfo->{'X-RestartIfChanged'} // "true")
|| $unit eq "systemd-user-sessions.service"
|| $unit eq "systemd-journald.service")
{
push @unitsToSkip, $unit;
} else {
# If this unit is socket-activated, then stop the
# socket unit(s) as well, and restart the
# socket(s) instead of the service.
my $socketActivated = 0;
if ($unit =~ /\.service$/) {
my @sockets = split / /, ($unitInfo->{Sockets} // "");
if (scalar @sockets == 0) {
@sockets = ("$baseName.socket");
}
foreach my $socket (@sockets) {
if (defined $activePrev->{$socket}) {
push @unitsToStop, $socket;
write_file($restartListFile, { append => 1 }, "$socket\n");
$socketActivated = 1;
}
}
}
# Otherwise, record that this unit needs to be
# started below. We write this to a file to
# ensure that the service gets restarted if we're
# interrupted.
if (!$socketActivated) {
write_file($restartListFile, { append => 1 }, "$unit\n");
}
push @unitsToStop, $unit;
}
}
}
}
}
sub pathToUnitName {
my ($path) = @_;
die unless substr($path, 0, 1) eq "/";
return "-" if $path eq "/";
$path = substr($path, 1);
$path =~ s/\//-/g;
# FIXME: handle - and unprintable characters.
return $path;
}
sub unique {
my %seen;
my @res;
foreach my $name (@_) {
next if $seen{$name};
$seen{$name} = 1;
push @res, $name;
}
return @res;
}
# Compare the previous and new fstab to figure out which filesystems
# need a remount or need to be unmounted. New filesystems are mounted
# automatically by starting local-fs.target. FIXME: might be nicer if
# we generated units for all mounts; then we could unify this with the
# unit checking code above.
my ($prevFss, $prevSwaps) = parseFstab "/etc/fstab";
my ($newFss, $newSwaps) = parseFstab "@out@/etc/fstab";
foreach my $mountPoint (keys %$prevFss) {
my $prev = $prevFss->{$mountPoint};
my $new = $newFss->{$mountPoint};
my $unit = pathToUnitName($mountPoint) . ".mount";
if (!defined $new) {
# Filesystem entry disappeared, so unmount it.
push @unitsToStop, $unit;
} elsif ($prev->{fsType} ne $new->{fsType} || $prev->{device} ne $new->{device}) {
# Filesystem type or device changed, so unmount and mount it.
write_file($restartListFile, { append => 1 }, "$unit\n");
push @unitsToStop, $unit;
} elsif ($prev->{options} ne $new->{options}) {
# Mount options changes, so remount it.
write_file($reloadListFile, { append => 1 }, "$unit\n");
}
}
# Also handles swap devices.
foreach my $device (keys %$prevSwaps) {
my $prev = $prevSwaps->{$device};
my $new = $newSwaps->{$device};
if (!defined $new) {
# Swap entry disappeared, so turn it off. Can't use
# "systemctl stop" here because systemd has lots of alias
# units that prevent a stop from actually calling
# "swapoff".
print STDERR "stopping swap device: $device\n";
system("@utillinux@/sbin/swapoff", $device);
}
# FIXME: update swap options (i.e. its priority).
}
if (scalar @unitsToStop > 0) {
@unitsToStop = unique(@unitsToStop);
print STDERR "stopping the following units: ", join(", ", sort(@unitsToStop)), "\n";
system("@systemd@/bin/systemctl", "stop", "--", @unitsToStop); # FIXME: ignore errors?
}
print STDERR "NOT restarting the following units: ", join(", ", sort(@unitsToSkip)), "\n"
if scalar @unitsToSkip > 0;
# Activate the new configuration (i.e., update /etc, make accounts,
# and so on).
my $res = 0;
print STDERR "activating the configuration...\n";
system("@out@/activate", "@out@") == 0 or $res = 2;
# Restart systemd if necessary.
if (abs_path("/proc/1/exe") ne abs_path("@systemd@/lib/systemd/systemd")) {
print STDERR "restarting systemd...\n";
system("@systemd@/bin/systemctl", "daemon-reexec") == 0 or $res = 2;
}
# Forget about previously failed services.
system("@systemd@/bin/systemctl", "reset-failed");
# Make systemd reload its units.
system("@systemd@/bin/systemctl", "daemon-reload") == 0 or $res = 3;
# Start all active targets, as well as changed units we stopped above.
# The latter is necessary because some may not be dependencies of the
# targets (i.e., they were manually started). FIXME: detect units
# that are symlinks to other units. We shouldn't start both at the
# same time because we'll get a "Failed to add path to set" error from
# systemd.
my @start = unique("default.target", split('\n', read_file($restartListFile, err_mode => 'quiet') // ""));
print STDERR "starting the following units: ", join(", ", sort(@start)), "\n";
system("@systemd@/bin/systemctl", "start", "--", @start) == 0 or $res = 4;
unlink($restartListFile);
# Reload units that need it. This includes remounting changed mount
# units.
my @reload = unique(split '\n', read_file($reloadListFile, err_mode => 'quiet') // "");
if (scalar @reload > 0) {
print STDERR "reloading the following units: ", join(", ", sort(@reload)), "\n";
system("@systemd@/bin/systemctl", "reload", "--", @reload) == 0 or $res = 4;
unlink($reloadListFile);
}
# Signal dbus to reload its configuration.
system("@systemd@/bin/systemctl", "reload", "dbus.service");
# Print failed and new units.
my (@failed, @new, @restarting);
my $activeNew = getActiveUnits;
while (my ($unit, $state) = each %{$activeNew}) {
push @failed, $unit if $state->{state} eq "failed" || $state->{substate} eq "auto-restart";
push @new, $unit if $state->{state} ne "failed" && !defined $activePrev->{$unit};
}
print STDERR "the following new units were started: ", join(", ", sort(@new)), "\n"
if scalar @new > 0;
if (scalar @failed > 0) {
print STDERR "warning: the following units failed: ", join(", ", sort(@failed)), "\n";
foreach my $unit (@failed) {
print STDERR "\n";
system("COLUMNS=1000 @systemd@/bin/systemctl status --no-pager '$unit' >&2");
}
$res = 4;
}
exit $res;