nixpkgs/system/options.nix
Eelco Dolstra b7f11ad98b * Generate sshd_config to set XAuthLocation if X11 forwarding is
enabled.

svn path=/nixos/trunk/; revision=7548
2007-01-07 10:19:16 +00:00

430 lines
9.8 KiB
Nix

[
{
name = ["networking" "hostName"];
default = "nixos";
description = "The name of the machine.";
}
{
name = ["boot" "autoDetectRootDevice"];
default = false;
description = "
Whether to find the root device automatically by searching for a
device with the right label. If this option is off, then a root
file system must be specified using <option>fileSystems</option>.
";
}
{
name = ["boot" "readOnlyRoot"];
default = false;
description = "
Whether the root device should be mounted writable. This should
be set when booting from CD-ROM.
";
}
{
name = ["boot" "rootLabel"];
description = "
When auto-detecting the root device (see
<option>boot.autoDetectRootDevice</option>), this option
specifies the label of the root device. Right now, this is
merely a file name that should exist in the root directory of
the file system. It is used to find the boot CD-ROM.
";
}
{
name = ["boot" "grubDevice"];
default = "";
example = "/dev/hda";
description = "
The device on which the boot loader, Grub, will be installed.
If empty, Grub won't be installed and it's your responsibility
to make the system bootable.
";
}
{
name = ["boot" "kernelParams"];
default = [
"selinux=0"
"apm=on"
"acpi=on"
"vga=0x317"
"console=tty1"
"splash=verbose"
];
description = "
The kernel parameters. If you want to add additional
parameters, it's best to set
<option>boot.extraKernelParams</options>.
";
}
{
name = ["boot" "extraKernelParams"];
default = [
];
example = [
"debugtrace"
];
description = "
Additional user-defined kernel parameters.
";
}
{
name = ["boot" "hardwareScan"];
default = true;
description = "
Whether to try to load kernel modules for all detected hardware.
Usually this does a good job of providing you with the modules
you need, but sometimes it can crash the system or cause other
nasty effects. If the hardware scan is turned on, it can be
disabled at boot time by adding the <literal>safemode</literal>
parameter to the kernel command line.
";
}
{
name = ["boot" "kernelModules"];
default = [];
description = "
The set of kernel modules to be loaded in the second stage of
the boot process. That is, these modules are not included in
the initial ramdisk, so they'd better not be required for
mounting the root file system. Add them to
<option>boot.initrd.extraKernelModules</options> if they are.
";
}
{
name = ["boot" "initrd" "kernelModules"];
default = [
"ahci"
"ata_piix"
"sd_mod"
"sr_mod"
"ide-cd"
"ide-disk"
"ide-generic"
"ext3"
];
description = "
The set of kernel modules in the initial ramdisk used during the
boot process. This set must include all modules necessary for
mounting the root device. That is, it should include modules
for the physical device (e.g., SCSI drivers) and for the file
system (e.g., ext3). The set specified here is automatically
closed under the module dependency relation, i.e., all
dependencies of the modules list here are included
automatically. If you want to add additional
modules, it's best to set
<option>boot.initrd.extraKernelModules</options>.
";
}
{
name = ["boot" "initrd" "extraKernelModules"];
default = [];
description = "
Additional kernel modules for the initial ramdisk. These are
loaded before the modules listed in
<option>boot.initrd.kernelModules</options>, so they take
precedence.
";
}
{
name = ["networking" "useDHCP"];
default = true;
description = "
Whether to use DHCP to obtain an IP adress and other
configuration for all network interfaces that are not manually
configured.
";
}
{
name = ["networking" "interfaces"];
default = [];
example = [
{ interface = "eth0";
ipAddress = "131.211.84.78";
netmask = "255.255.255.128";
gateway = "131.211.84.1";
}
];
description = "
The configuration for each network interface. If
<option>networking.useDHCP</option> is true, then each interface
not listed here will be configured using DHCP.
";
}
{
name = ["fileSystems"];
default = [];
example = [
{ mountPoint = "/";
device = "/dev/hda1";
}
{ mountPoint = "/data";
device = "/dev/hda2";
fsType = "ext3";
options = "data=journal";
}
];
description = "
The file systems to be mounted. It must include an entry for
the root directory (<literal>mountPoint = \"/\"</literal>) if
<literal>boot.autoDetectRootDevice</literal> is not set. Each
entry in the list is an attribute set with the following fields:
<literal>mountPoint</literal>, <literal>device</literal>,
<literal>fsType</literal> (a file system type recognised by
<command>mount</command>; defaults to
<literal>\"auto\"</literal>), and <literal>options</literal>
(the mount options passed to <command>mount</command> using the
<option>-o</option> flag; defaults to <literal>\"defaults\"</literal>).
";
}
{
name = ["swapDevices"];
default = [];
example = ["/dev/hda7" "/dev/hdb3" "/var/swapfile"];
description = "
The swap devices and swap files. These must have been
initialised using <command>mkswap</command>.
";
}
{
name = ["services" "extraJobs"];
default = [];
description = "
Additional Upstart jobs.
";
}
{
name = ["services" "syslogd" "tty"];
default = 10;
description = "
The tty device on which syslogd will print important log
messages.
";
}
{
name = ["services" "mingetty" "ttys"];
default = [1 2 3 4 5 6];
description = "
The list of tty (virtual console) devices on which to start a
login prompt.
";
}
{
name = ["services" "mingetty" "waitOnMounts"];
default = false;
description = "
Whether the login prompts on the virtual consoles will be
started before or after all file systems have been mounted. By
default we don't wait, but if for example your /home is on a
separate partition, you may want to turn this on.
";
}
{
name = ["services" "sshd" "enable"];
default = false;
description = "
Whether to enable the Secure Shell daemon, which allows secure
remote logins.
";
}
{
name = ["services" "sshd" "forwardX11"];
default = true;
description = "
Whether to enable sshd to forward X11 connections.
";
}
{
name = ["services" "ntp" "enable"];
default = true;
description = "
Whether to synchronise your machine's time using the NTP
protocol.
";
}
{
name = ["services" "ntp" "servers"];
default = [
"0.pool.ntp.org"
"1.pool.ntp.org"
"2.pool.ntp.org"
];
description = "
The set of NTP servers from which to synchronise.
";
}
{
name = ["services" "xserver" "enable"];
default = false;
description = "
Whether to enable the X server.
";
}
{
name = ["services" "httpd" "enable"];
default = false;
description = "
Whether to enable the Apache httpd server.
";
}
{
name = ["services" "httpd" "user"];
default = "wwwrun";
description = "
User account under which httpd runs. The account is created
automatically if it doesn't exist.
";
}
{
name = ["services" "httpd" "group"];
default = "wwwrun";
description = "
Group under which httpd runs. The account is created
automatically if it doesn't exist.
";
}
{
name = ["services" "httpd" "hostName"];
default = "localhost";
description = "
Canonical hostname for the server.
";
}
{
name = ["services" "httpd" "httpPort"];
default = 80;
description = "
Port for unencrypted HTTP requests.
";
}
{
name = ["services" "httpd" "httpsPort"];
default = 443;
description = "
Port for encrypted HTTP requests.
";
}
{
name = ["services" "httpd" "adminAddr"];
example = "admin@example.org";
description = "
E-mail address of the server administrator.
";
}
{
name = ["services" "httpd" "logDir"];
default = "/var/log/httpd";
description = "
Directory for Apache's log files. It is created automatically.
";
}
{
name = ["services" "httpd" "stateDir"];
default = "/var/run/httpd";
description = "
Directory for Apache's transient runtime state (such as PID
files). It is created automatically. Note that the default,
/var/run/httpd, is deleted at boot time.
";
}
{
name = ["services" "httpd" "subservices" "subversion" "enable"];
default = false;
description = "
Whether to enable the Subversion subservice in the webserver.
";
}
{
name = ["services" "httpd" "subservices" "subversion" "notificationSender"];
example = "svn-server@example.org";
description = "
The email address used in the Sender field of commit
notification messages sent by the Subversion subservice.
";
}
{
name = ["services" "httpd" "subservices" "subversion" "autoVersioning"];
default = false;
description = "
Whether you want the Subversion subservice to support
auto-versioning, which enables Subversion repositories to be
mounted as read/writable file systems on operating systems that
support WebDAV.
";
}
]