- disable tiger, strategoxt, they don't work and give errors
- ftp.nl.kernel.org seems to have some problems, replaced with ftp.de.kernel.org
should be put back eventually
svn path=/nixpkgs/trunk/; revision=1215
- The package has a non-standard build interface;
fixed with hooks for genericBuild
- The graph library requires x11 and the configure
script looks in absolute directory paths to find
X11. Fixed by using patched configure script from
which the absolute paths have been removed. As
a consequence the graph library is not build until
we have X11 support in Nix.
svn path=/nixpkgs/trunk/; revision=1188
even if some build phase failed if the variable `$succeedOnFailure'
is set to 1. If that happens, the file `$out/nix-support/failed' is
created to mark the build result as bad. This is useful for release
management systems that might want to publish failed releases.
svn path=/nixpkgs/trunk/; revision=1163
* A new `distPhase' to build source distributions (enabled when
$doDist = 1).
* A new `checkPhase' to perform `make check' (enabled when $doCheck =
1).
* Allow the prefix to be redirected, either by setting $prefix or by
setting $useTempPrefix to 1. Useful when making distributions.
* Allow the build or install phases to be skipped by setting
$dontBuild $dontInstall to 1.
* Allow the order of phases to be changed by setting $phases.
svn path=/nixpkgs/trunk/; revision=1151
* Remove precompiled headers, which are nice except that
A) they don't work; and
B) they make gcc take up 270% more disk space.
svn path=/nixpkgs/trunk/; revision=1129
("/usr/bin/ld: can't use -s with -r (resulting file would not be
relocatable)").
* Since stdenv/generic had to be modified for this, I forked it in
situ. This should be merged later.
svn path=/nixpkgs/trunk/; revision=1121
* Tried to upgrade Firefox to 0.9, but it's too broken. It's
basically impossible to build it automatically. Firefox must be
started once as a user with write permission to the Firefox
directory to generate some files, and this can only be done
interactively (apparently). Hopefully 0.10 fixes this. Firefox
also barfs with link errors if the flag `--enable-single-profile' is
not used.
svn path=/nixpkgs/trunk/; revision=1067
An interesting complication is that we have to change the ELF type
of the executable from `Linux' to `SVR4', otherwise the
`ld-linux.so.2' trick to override the glibc used doesn't work
(apparently `Linux' is not a recognised ELF type!).
UT doesn't work with software Mesa, so right now we impurily use
`/usr/lib/libGL.so'. I cannot really test whether it works with
hardware Mesa, since it barfs with an error about missing OpenGL
extensions. But that's probably because I'm testing this on an
iBook over an SSH connection to a Linux machine.
svn path=/nixpkgs/trunk/; revision=1047
to deploy existing binary-only components.
We use the `ld-linux.so.2 PROGRAM' trick to force the use of our own
glibc, and set LD_LIBRARY_PATH to point to the required libraries
(X11, Mesa).
Since Mesa is software-only, Q3A is rather slow. I'll have to
figure out how to use the Mesa from XFree86 (X.Org), since it knows
how to use DRI (or at least speak the GLX protocol). Unfortunately
the xlibs people haven't modularised that part of XFree86 yet.
Also, the flag `+set s_initsound 0' has to be passed to Quake to
disable sound, otherwise it segfaults on startup. It doesn't do
this with the normal glibc, which is strange. Maybe it tries to
dynamically load some sound library or something.
svn path=/nixpkgs/trunk/; revision=1046
* Zapping/VLC/MPlayer: use libXv.
* MPlayer: upgrade to 1.0pre4.
* Zapping: add libXext to the rpath. I don't understand why this is
necessary. Zapping doesn't itself link against libXext, though some
of its dependencies do. (Maybe this is due to `--export-dynamic'?)
svn path=/nixpkgs/trunk/; revision=990
the tree being fetched from a Subversion repository. The revision
number is now optional (and defaults to HEAD).
This makes `fetchsvn' more pure. First, a URL/revision tuple does
not uniquely identify a file resource, since the repository itself
might change. Second, `svn:external' attributes can cause arbitrary
resources to be exported.
A script `nix-prefetch-svn' has been provided to determine the hash
of a URL.
svn path=/nixpkgs/trunk/; revision=938
libgcc of the gcc being built, not the gcc building it.
* Only include a directory in the rpath of an executable/library if it
is actually used. Before, the `/lib' directory of every build input
was added to the rpath, causing many unnecessary retained
dependencies. For instance, Perl has a `/lib' directory, but most
applications whose build process uses Perl don't actually link
against Perl. (Also added a test for this.)
* After building glibc, remove glibcbug, to prevent a retained
dependency on gcc.
* Add a newline after `building X' in GNU Make.
svn path=/nixpkgs/trunk/; revision=911
adds all directories specified in `ACLOCAL_PATH' to the `aclocal'
command line as `-I' flags. Also, it provides a setup hook that
adds the `.../share/aclocal' directory of every build input to
`ACLOCAL_PATH'.
* Upgraded Libtool.
* Graphviz requires the X Athena widgets, which in turn requires the X
miscellaneous utilities library; added those. However it doesn't
work yet since libXt is broken.
svn path=/nixpkgs/trunk/; revision=888
On the downside, the build process of stdenvLinux builds gcc 9 times
(3 x 3 bootstrap stages). That's a bit excessive.
svn path=/nixpkgs/trunk/; revision=880
* Make builders unexecutable by removing the hash-bang line and
execute permission.
* Convert calls to `derivation' to `mkDerivation'.
* Remove `system' and `stdenv' attributes from calls to
`mkDerivation'. These transformations were all done automatically,
so it is quite possible I broke stuff.
* Put the `mkDerivation' function in stdenv/generic.
svn path=/nixpkgs/trunk/; revision=874
store, rather than outside (such as /bin/sh).
For instance, the Nix expression for the ATerm library now looks
like this:
{stdenv, fetchurl}:
stdenv.mkDerivation {
name = "aterm-2.0.5";
builder = ./builder.sh;
...
}
where `mkDerivation' is a helper function in `stdenv' that massages
the given attribute set into using the bash shell that is part of
the standard environment:
mkDerivation = attrs: derivation (att s // {
builder = pkgs.bash ~ /bin/sh;
args = ["-e" attrs.builder];
stdenv = (...);
system = (...).system;
});
Note that this makes it unnecessary to set the `stdenv' and `system'
attributes, since `mkDerivation' already does that.
svn path=/nixpkgs/trunk/; revision=866
whether the system header file directory actually exists (when
calling fixinc), so passing a non-existent directory no longer
works. Instead we make a empty dummy directory.
svn path=/nixpkgs/trunk/; revision=858
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
checked whether absolute paths passed to gcc/ld refer to the store,
which is wrong: they can also refer to the build tree
(/tmp/nix-...).
* Less static composition in the construction of stdenv-nix-linux:
gcc-wrapper and generic are now passed in as arguments, rather then
referenced by relative path. This makes it easier to hack on a
specific stage of the bootstrap process (before, a change to, e.g.,
generic/setup.sh would cause all bootstrap stages to be redone).
svn path=/nixpkgs/trunk/; revision=833
- gcc/ld-wrappers have been factored out into a separate
derivation. This allows a working gcc to be installed in the user
environment. (Previously the Nix gcc didn't work because it
needed a whole bunch of flags to point to glibc.)
- Better modularity: packages can specify hooks into the setup
scripts. For instance, setup no longer knows about the
PKG_CONFIG_PATH variable; pkgconfig can set it up instead.
- gcc not longer depends on binutils. This simplifies the bootstrap
process.
svn path=/nixpkgs/trunk/; revision=816
/usr/lib/crt1.o, while it should be using $glibc/lib/crt1.o. This
quick hack (prepending $glibc/lib to the GCC search path using "-B")
fixes the problem, but a better solution to prevent this sort of
thing is to remove these static paths from gcc.
Note: this problem was found using the pure UML Nix environment
(where we don't have /usr/lib).
svn path=/nixpkgs/trunk/; revision=810
(stdenv) on Linux. The previous 1-stage bootstrap was insufficient,
because the tools in stdenv where built by native tools. For
instance, the Nix bash had a reference to /lib/libncurses. This
doesn't happen with a 2-stage bootstrap, since the bash built in
stage 2 will be built with the gcc built in stage 1, which doesn't
search in the "standard" locations.
Motto: "Disparaging the boot is a bootable offense."
svn path=/nixpkgs/trunk/; revision=809
stages of the bootstrap process (i.e., stdenvLinuxBoot).
* Add those packages to the distribution. We didn't do that before
because it would cause them to be built twice.
svn path=/nixpkgs/trunk/; revision=753
