Commit graph

60 commits

Author SHA1 Message Date
Eelco Dolstra 96ba0ca283 For some units, use "systemctl restart" rather than "systemctl stop/start"
During a configuration switch, changed units are stopped in the old
configuration, then started in the new configuration (i.e. after
running the activation script and running "systemctl daemon-reload").
This ensures that services are stopped using the ExecStop/ExecStopPost
commands from the old configuration.

However, for some services it's undesirable to stop them; in
particular dhcpcd, which deconfigures its network interfaces when it
stops.  This is dangerous when doing remote upgrades - usually things
go right (especially because the switch script ignores SIGHUP), but
not always (see 9aa69885f0).  Likewise,
sshd should be kept running for as long as possible to prevent a
lock-out if the switch fails.

So the new option ‘stopIfChanged = false’ causes "systemctl restart"
to be used instead of "systemctl stop" followed by "systemctl start".
This is only proper for services that don't have stop commands.  (And
it might not handle dependencies properly in some cases, but I'm not
sure.)
2013-01-05 01:05:25 +01:00
Mathijs Kwik 7e70cffc45 systemd mount units: better handling of mandatory options 2013-01-01 14:53:54 +01:00
Mathijs Kwik ebf4816717 systemd mount units: use 'escapeSystemdPath' from lib/utils 2013-01-01 14:53:54 +01:00
Mathijs Kwik 16a9bcfe81 add support for systemd mount units
This is mainly useful for specifying mounts that depend on other
units. For example sshfs or davfs need network (and possibly
nameservices).

While systemd makes a distinction between local and remote
filesystems, this only works for in-kernel filesystems such as
nfs and cifs.

fuse-based filesystems (such as sshfs and davs) are classified as
local, so they fail without networking. By explicitly declaring these
mounts as full systemd units (as opposed to having systemd generate
them automatically from /etc/fstab), dependencies can be specified as
on every other unit.

In the future, we can probably port NixOS' filesystems handling to use
these native systemd.mount units and skip /etc/fstab altogether, but
this probably requires additional changes, such as starting systemd
even earlier during boot (stage 1).
2013-01-01 13:55:48 +01:00
Mathijs Kwik 244ed6ae71 nscd: use proper systemd.special(7) targets 2012-12-27 12:23:50 +01:00
Rob Vermaas 39a6143c66 Add options to control rate limiting behaviour of journald. See 'man journald.conf' for more information. 2012-12-16 20:28:45 +01:00
Eelco Dolstra bd7ea9be58 sysinit.target: Drop the dependency on local-fs.target and swap.target
Having all services with DefaultDependencies=yes depend on
local-fs.target is annoying, because some of those services might be
necessary to mount local filesystems.  For instance, Charon's
send-keys feature requires sshd to be running in order to receive LUKS
encryption keys, which in turn requires dhcpcd, and so on.  So we drop
this dependency (and swap.target as well for consistency).  If
services require a specific mount, they should use RequiresMountsFor
in any case.
2012-12-14 17:42:54 +01:00
Eelco Dolstra b1da38f564 Merge remote-tracking branch 'origin/master' into systemd 2012-11-30 16:12:04 +01:00
Eelco Dolstra 3c6e0fd594 Generate the binary hardware database required by systemd 196 2012-11-29 18:51:44 +01:00
aszlig a333f7212e systemd: Fail if kernel features are missing.
This has rendered my system unbootable, because I forgot to enable AUTOFS4 in my
custom kernel. In addition to AUTOFS4, this includes (hopefully) all other
kernel features needed by systemd, as listed in the README:

REQUIREMENTS:
  Linux kernel >= 2.6.39
    with devtmpfs
    with cgroups (but it's OK to disable all controllers)
    optional but strongly recommended: autofs4, ipv6

Autofs4 is not a requirement here, but in our case it turns out that the system
is not able to boot properly with a LUKS-enabled system (or at least not on _my_
system).

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-11-06 11:25:43 +01:00
Eelco Dolstra af4e176c12 Fix description 2012-11-02 14:10:06 +01:00
Eelco Dolstra 48a0ea0513 Make Apache wait for ‘charon send-keys’
(This is a no-op on non-Charon deployments since the ‘keys.target’
unit won't have any dependencies.)
2012-11-01 23:32:12 +01:00
Eelco Dolstra 1da362b34b Fix coverage data collection
http://hydra.nixos.org/build/3253046
2012-10-30 17:27:14 +01:00
Eelco Dolstra 1a82024dd8 In the tests, don't start agetty on /dev/ttyS0
Running agetty on ttyS0 interferes with the backdoor, which uses ttyS0
as its standard error.  After agetty starts, writes to the stderr file
descriptor will return EIO (though doing "exec 2>/proc/self/fd/2" will
miracuously fix this).

http://hydra.nixos.org/build/3252782
2012-10-29 21:10:00 +01:00
Eelco Dolstra b4a1893cdd systemd-vconsole-setup: Don't put the X server in non-raw mode
‘systemd-vconsole-setup’ by default operates on /dev/tty0, the
currently active tty.  Since it puts /dev/tty0 in Unicode or ASCII
mode, if the X server is currently active when it runs, keys such as
Alt-F4 won't reach the X server anymore.  So use /dev/tty1 instead.
2012-10-18 11:58:37 -04:00
Eelco Dolstra a4cad32c3d Generate more user-friendly script filenames
This is primarily important in journal entries.
2012-10-18 11:58:37 -04:00
Eelco Dolstra 12d1cd87ce Systemd unit names can contain Nix-illegal characters, so don't include them 2012-10-12 17:32:05 -04:00
Eelco Dolstra 97a2de983b Ensure that swap.target is pulled in by switch-to-configuration even if it failed earlier 2012-10-12 16:38:00 -04:00
Eelco Dolstra b968244aa1 Move fs.target to filesystems.nix 2012-10-12 15:08:44 -04:00
Eelco Dolstra d63da5892c Ensure that systemd-modules-load is restarted when boot.kernelModules changes 2012-10-11 17:58:46 -04:00
Eelco Dolstra b606165bd9 Allow a unit to declare "triggers" that force a restart
The triggers are just arbitrary strings that are included in the unit
under X-Restart-Triggers.  The idea is that if they change between
reconfigurations, switch-to-configuration will restart the unit
because its store path changed.  This is mostly useful for services
that implicitly depend on generated files in /etc.  Thus you can say

  restartTriggers = [ confFile ];

where ‘confFile’ is the derivation that generated the /etc file in
question.
2012-10-11 17:54:43 -04:00
Eelco Dolstra 4104f60800 Fix accidental commit 2012-10-11 12:43:08 -04:00
Eelco Dolstra d7458b5fc2 Split the monolithic network-interface service into multiple units
For each statically configured interface, we now create a unit
‘<interface>-cfg.service’ which gets started as soon as the network
device comes up.  Similarly, each bridge defined in
‘networking.bridges’ and virtual interface in ‘networking.interfaces’
is created by a service ‘<interface>.service’.

So if we have

  networking.bridges.br0.interfaces = [ "eth0" "eth1" ];
  networking.interfaces =
    [ { name = "br0";
        ipAddress = "192.168.1.1";
      }
    ];

then there will be a unit ‘br0.service’ that depends on
‘sys-subsystem-net-devices-eth0.device’ and
‘sys-subsystem-net-devices-eth1.device’, and a unit ‘br0-cfg.service’
that depends on ‘sys-subsystem-net-devices-br0.device’.
2012-10-10 17:55:42 -04:00
Eelco Dolstra 62b707de07 Add support for postStop scripts 2012-10-10 17:55:13 -04:00
Eelco Dolstra 17a7f48364 Add an option for BindsTo dependencies 2012-10-10 16:50:41 -04:00
Eelco Dolstra d71c0bb834 Respect partOf etc. for socket and target units 2012-10-09 15:14:15 -04:00
Eelco Dolstra f451afea8f Remove ‘services.journald.logKernelMessages’
This option no longer exists in systemd.
2012-10-08 10:51:17 -04:00
Eelco Dolstra 2cf5e3cb66 Add options ‘boot.systemd.targets’ and ‘boot.systemd.sockets’ 2012-10-01 18:58:11 -04:00
Eelco Dolstra 13d747c11a Support postStart scripts in service units 2012-10-01 16:45:49 -04:00
Eelco Dolstra 891be375b5 Make unitConfig/serviceConfig attribute sets
So instead of:

  boot.systemd.services."foo".serviceConfig =
    ''
      StartLimitInterval=10
      CPUShare=500
    '';

you can say:

  boot.systemd.services."foo".serviceConfig.StartLimitInterval = 10;
  boot.systemd.services."foo".serviceConfig.CPUShare = 500;

This way all unit options are available and users can set/override
options in configuration.nix.
2012-10-01 16:27:42 -04:00
Eelco Dolstra 353522ef79 Remove JoinControllers line because upstream reverted joining cpuset 2012-10-01 14:33:01 -04:00
Eelco Dolstra 1ad655bdcf Don't join the cpuset controller with cpu/cpuacct
This works around the problem described here:

http://lists.freedesktop.org/archives/systemd-devel/2012-September/006648.html
2012-09-21 22:56:13 -04:00
Eelco Dolstra b02c488fde Automatically append ".service" to the name of service units 2012-08-23 10:25:27 -04:00
Eelco Dolstra 223f04b3ca Add option ‘boot.systemd.packages’ to use units from the specified packages 2012-08-21 11:28:47 -04:00
Eelco Dolstra a44e575196 switch-to-configuration: Respect the ‘restartIfChanged’ attribute 2012-08-17 13:14:42 -04:00
Eelco Dolstra d18c2afc6f Add an ip-up target for services that require IP connectivity 2012-08-15 15:38:52 -04:00
Eelco Dolstra 981347429a Add support for PartOf dependencies 2012-08-15 15:36:54 -04:00
Eelco Dolstra a133eb5991 Add some missing targets
Also make multi-user.target pull in remote-fs.target to mount remote
filesystems.
2012-08-14 18:14:48 -04:00
Eelco Dolstra 55b2736566 Add a target ‘fs.target’ that waits for all filesystems 2012-08-14 18:14:16 -04:00
Eelco Dolstra 39030211af Add a unitConfig option to set the [Unit] section of units 2012-08-10 18:56:12 -04:00
Eelco Dolstra 52b6e10315 Use systemd-modules-load.service to load required kernel modules 2012-08-06 16:52:08 -04:00
Eelco Dolstra 9f9ae7c7e9 Share option definitions between the systemd and Upstart compatibility modules 2012-08-06 11:45:59 -04:00
Eelco Dolstra 4d2deff7af Stop obsolete units, restart changed units, start new units 2012-08-02 17:26:23 -04:00
Eelco Dolstra 71ca633431 Start agetty on tty1
‘logind’ automatically starts agetty on all virtual consoles except
tty1.  We have to do that ourselves.
2012-07-20 18:32:24 -04:00
Eelco Dolstra 5fabcf63a3 Get delayed shutdowns to work 2012-07-20 15:40:50 -04:00
Eelco Dolstra 1375e7951d Enable systemd-journal-flush.service (added by systemd 187) 2012-07-20 12:02:42 -04:00
Eelco Dolstra 02e37ba6b0 Shorten filenames of start scripts to make log messages more readable 2012-07-19 17:41:42 -04:00
Eelco Dolstra 6419172bc2 journald: enable logging to the console 2012-07-19 17:32:50 -04:00
Eelco Dolstra 917e53a2d2 Update units names for systemd-186 2012-07-16 17:47:11 -04:00
Eelco Dolstra 337423af8e Backdoor: depend on /dev/hvc0
Systemd is the shit: units can declare a dependency on the appearance
of device nodes.  Yay!
2012-06-19 17:36:02 -04:00