1 minute is too short, given that the autovacuum launcher often seems
to require exactly 1 minute to shut down. (This might be a bug
related to autovacuum_naptime.)
Now you can access gitweb at http://yourserver/gitweb by simply adding
this to configuration.nix (assuming services.lighttpd.enable = true);
services.lighttpd.gitweb.enable = true;
The path to all bare repositories served by gitweb can be set with this
option (default value below):
services.lighttpd.gitweb.projectroot = "/srv/git";
Based on patch contributed by Bjørn Forsman.
If true, show server status overview at /server-status, statistics at
/server-statistics and list of loaded modules at /server-config.
Patch contributed by Bjørn Forsman.
If true, requests in the form /~user/page.html are rewritten to take
the file public_html/page.html from the home directory of the user.
Default is off.
Patch contributed by Bjørn Forsman.
Instead of forcing users to configure lighttpd manually, make it an
option. The current services.lighttpd.configText option can still be
used for manual configuration, but if it is left blank (default) we'll
use the new generated config file.
The generated config file ensures that the server drops root priveleges
and runs as the "lighttpd" user. It pulls in some new config params that
can be set in configuration.nix (here with default values):
services.lighttpd.document-root = "/srv/www"
services.lighttpd.port = 80
services.lighttpd.extraConfig = "" # appended to the generated file
And it enables access and error logging to the systemd journal.
Patch contributed by Bjørn Forsman.
Activation scripts are run before systemd is started, so unless users
are loading firmware in the initrd (which AFAICT we currently have no
support for) the previous /sys-based setting of firmware_class was
ineffective on boot.
Signed-off-by: Shea Levy <shea@shealevy.com>
- drop custom config:
(please wacom using folks review this part and think
about how to get it back if its important to you)
- put default config shipping with xf86_input_wacom
into /etc/X11/xorg.conf.d/
which seems to be interpreted again when
devices are hot plugged
- when starting x11, also provide xinput
.. you never know when you need it
This fixes all problems I had:
- device only worked when plugged in, then xorg was started
(an alternative quick fix is switching to terminal by ctrl-alt-F1 and back)
- I had to disable some devices, because eg myaint switched input
device many times a sec rendering it unusable otherwise, some of those devices
configured did not work.
Details:
http://sourceforge.net/apps/mediawiki/linuxwacom/index.php?title=FAQ#Is_hotplugging_supported_for_my_USB_tablet.3F
See 12 -> HAL or xorg.conf.d
We don't need to set $TZ, because we have /etc/localtime. In fact,
setting $TZ without $TZDIR doesn't work anymore since Glibc no longer
contains zone info.
This reverts commit 7f1e728606.
This would have been nice if we had had it from the start, but now it
just breaks things for existing users. Maybe we can add it conditionally
when new postgres versions come out.
Signed-off-by: Shea Levy <shea@shealevy.com>
This reverts commit 1e543984bc.
This would have been nice if we had had it from the start, but now it
just breaks things for existing users. Maybe we can add it conditionally
when new postgres versions come out.
Signed-off-by: Shea Levy <shea@shealevy.com>
desktop-manager is a bit misleading in this case as there is no
session yet and most apps are still missing. This can eventually
grow further once more e17 apps get packaged for nix.
However, for now, I need to initialize some e17 dbus services to
have the "terminology" terminal emulator provide gfx previews.
The user should specify which major version to use
(e.g. "services.postgresql.package = pkgs.postgresql92"). We can't
really provide a sensible default, because such a default would have
to be updated from time to time, and there is no automated upgrade
procedure. So leave upgrading to the user.
Enabling udisks2 allows gvfs (which should be built with udisks support) to
perform mount/unmount operations on removable drives. It affects Thunar and
probably other Gtk-based file managers.
Gvfs doesn't supports earlier versions of udisks.
As @edolstra pointed out, this behavior is not equivalent to what we had
before as the kernel command line parameter won't take effect until the
next boot. Probably it's not likely that someone will make this change
and then add a network card before rebooting, but might as well support
that since we can.
This reverts commit f7563698df.
Signed-off-by: Shea Levy <shea@shealevy.com>
Using /etc/lighttpd.conf "hides" the config file from NixOS so that it
will not automatically restart the service when its config file changes.
So don't do that.
I think it's nice that it first asks the usual password, and then offers the
otpw one if enabled. That enables dovecot to show the last pam prompt.
I also add the dovecot option for that.
More specifically, this removes services.pulseaudio and adds the option
hardware.pulseaudio.systemWide which defaults to false but can be used to turn
on the system-wide PulseAudio server (previously defined in
services.pulseaudio). Since the two PulseAudio modes are mutually exclusive
anyway (maybe not strictly true, but I don't think is a good idea combining
them) its nicer to be able to reuse server and ALSA configuration between them.
Also the system-wide PulseAudio service has been adjusted to systemd, and a few
things has been fixed (there was no alsa.conf before, for example).
The bottomline is that people that was using hardware.pulseaudio before should
be able to keep doing it in exactly the same way, and people that used
services.pulseaudio must switch over to hardware.pulseaudio.systemWide instead.
The smartd used to expect a list of devices to monitor. After this patch, it
expects a list of attribute sets, which may have two attributes:
- device: path to the device (required)
- options: smartd options to apply to this particular device (optional)
A concrete example configuration would be:
services.smartd = {
enable = true;
devices = [ { device = "/dev/sda"; } { device = "/dev/sdb"; options = "-d sat"; } ];
};
Furthermore, the config option 'deviceOpts' can be used to configure options
that are applied to *every* device.
Enable it with
services.transmission.enable = true;
and optionally configure it
services.transmission.settings =
{
download-dir = "/srv/torrents/";
incomplete-dir = "/srv/torrents/.incomplete/";
incomplete-dir-enabled = true;
rpc-whitelist = "127.0.0.1,192.168.*.*";
# for users in group "transmission" to have access to torrents
umask = 2;
};
The above settings are written/merged into settings.json each time the
service is about to start.
Newer kernels (since torvalds/linux@abb139e75c) try to
read firmware directly from the filesystem before falling back to a
userspace helper (udev) if firmware cannot be found (in even newer
kernels, the fallback path can be disabled altogether). By default, only
certain paths in /lib/firmware* are searched, so this was initially not
helpful for NixOS.
Since torvalds/linux@2760284206 (which,
based on the commit message, was implemented just for NixOS, go us!),
though, an extra path can be dynamically prepended to the search path.
So do that, in three ways:
1. Pass a kernel command line option in case the module is built-in
2. Add a line to modprobe.conf in case the module isn't yet loaded by
activation-time
3. Add an activation script to set the option in /sys in case the module
is already loaded by activation-time.
xf86videovmware[1].
Adds "vmware" to list of default options of
services.xerver.videoDrivers.
new default:
[ "ati" "cirrus" "intel" "vesa" "vmware" ]
old default:
[ "ati" "cirrus" "intel" "vesa" ]
[1] Pull request for xf86videovmware found at
https://github.com/NixOS/nixpkgs/pull/338.
The mongodb service runs as user mongodb, and therefore
the preStart-script has no permissions to set up mongodb
directories. This is solved by adding an initialisation
service that runs as root and just sets up the required
directories.
This reverts commit 683100666d.
Seems somebody (systemd? the kernel?) gets confused at power
events and remounts the filesystem containing /nix/store as
read-only.
This is necessary to prevent a race. Udev 197 has a new naming scheme
for network devices, so it will rename (say) eth0 to eno0. This fails
with "error changing net interface name eth0 to eno1: Device or
resource busy" if another process has opened the interface in the
meantime.
This reverts commit 1e741f1572b6793b861e2f9820015475ce339ae0 as it is
unnecessary according to @edolstra, because services.xserver.config from another
module will be merged into the configuration.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is currently only a very simple implementation which just recurses a list
of heads that get chained together to the right of the corresponding previous
item of the list.
If I forgot about something in the already existing configuration options,
please let me know or if this commit is useless or a duplicate, feel free to
revert. But by looking at implementation before this commit, I only see zaphod
and/or quirky xinerama-like configuration options.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This is especially useful if you want to supply a default XRandR configuration,
where you need multiple "Monitor" sections in order to set properties for
specific CRTCs (if not running in zaphod mode).
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
To be honest, it's more like "be less discriminating against USB tablets".
USB tablets usually get autodetected, device name is not necessary and defaulting to a serial touchscreen is a clear discrimination.
Unconditionally remapping buttons is generally not a good idea either.
Old defaults transformed into examples.
During a configuration switch, changed units are stopped in the old
configuration, then started in the new configuration (i.e. after
running the activation script and running "systemctl daemon-reload").
This ensures that services are stopped using the ExecStop/ExecStopPost
commands from the old configuration.
However, for some services it's undesirable to stop them; in
particular dhcpcd, which deconfigures its network interfaces when it
stops. This is dangerous when doing remote upgrades - usually things
go right (especially because the switch script ignores SIGHUP), but
not always (see 9aa69885f0). Likewise,
sshd should be kept running for as long as possible to prevent a
lock-out if the switch fails.
So the new option ‘stopIfChanged = false’ causes "systemctl restart"
to be used instead of "systemctl stop" followed by "systemctl start".
This is only proper for services that don't have stop commands. (And
it might not handle dependencies properly in some cases, but I'm not
sure.)
Running it from systemd rather than cron has several advantages:
systemd ensures that only one instance runs at a time; the GC can be
manually started/stopped; and logging goes to the journal.
We still need cron to start the service at the right time, but
hopefully soon we can get rid of cron entirely (once systemd supports
starting a unit at a specific time).
Charon needs this to include the dynamically generated
/root/.vbox-charon-client-key. (We used
users.extraUsers.root.openssh.authorizedKeys.keyFiles for this, but
that no longer works.)
Instead of the somewhat hacky script that inserted public keys
into the users' .ssh/authorized_keys files, use the AuthorizedKeysFile
configuration directive in sshd_config and generate extra key
files for each user (placed in /etc/authorized_keys.d/).
The xsession script runs services that depend on a sane environment. Gpg-agent, for
example, runs the program "pinentry-gtk-2" to obtain the password to unlock GnuPG
and SSH keys. That program will display only gibberish unless $FONTCONFIG_FILE is
configured properly. Instead of configuring these variables explicitly one by one,
we just source /etc/profile, which contains the appropriate @shellInit@ code.
Thus
networking.interfaces = [ { name = "eth0"; ipAddress = "192.168.15.1"; } ];
can now be written as
networking.interfaces.eth0.ipAddress = "192.168.15.1";
The old notation still works though.
