Eelco Dolstra
37470cccc5
* Blacklist the "evbug" module.
...
svn path=/nixos/trunk/; revision=18285
2009-11-08 09:08:50 +00:00
Eelco Dolstra
16c2aa734f
* Generate /etc/modprobe.conf to allow the setting of module options
...
and the blacklisting of modules.
svn path=/nixos/trunk/; revision=18284
2009-11-08 09:01:53 +00:00
Wouter den Breejen
b0ba17873c
Fixed hash replace with a variable to the real hash
...
svn path=/nixos/trunk/; revision=18268
2009-11-07 21:03:57 +00:00
Eelco Dolstra
9bf8801dc6
* Use a tmpfs for /var/run/nscd to ensure that / or /var can be
...
unmounted or at least remounted read-only during shutdown. Upstart
0.6 apparently uses nscd to do some name lookups, resulting in it
holding some mmap mappings to deleted files in /var/run/nscd.
E.g. lsof shows:
init 1 root DEL REG 253,0 1850313 /var/run/nscd/dbyn3Piz
init 1 root DEL REG 253,0 1850312 /var/run/nscd/dbt2e8PH
See also http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=324900 .
This is a workaround - it would be better if Upstart didn't do this.
svn path=/nixos/branches/upstart-0.6/; revision=18258
2009-11-07 15:29:46 +00:00
Eelco Dolstra
2353e53c5f
* /var/run/safemode isn't used anywhere.
...
svn path=/nixos/branches/upstart-0.6/; revision=18257
2009-11-07 15:24:59 +00:00
Eelco Dolstra
d9d072a89b
* Improve the mysql shutdown.
...
svn path=/nixos/branches/upstart-0.6/; revision=18255
2009-11-07 12:43:32 +00:00
Eelco Dolstra
7aecd0ca53
* hal: depend on both dbus and acpid (if enabled).
...
* dbus: don't signal Upstart, since that seems to make it forget about
pending events or something. In any case starting dbus after acpid
was running wouldn't trigger hal to be started (but the other way
around did work).
svn path=/nixos/branches/upstart-0.6/; revision=18251
2009-11-07 12:01:12 +00:00
Eelco Dolstra
7d47575a58
* A 15-second timeout to start the X server is too low if there are a
...
billion other daemons starting at the same time during the boot.
svn path=/nixos/branches/upstart-0.6/; revision=18250
2009-11-07 11:32:28 +00:00
Eelco Dolstra
b7c519456e
* Updated switch-to-configuration for Upstart 0.6.
...
svn path=/nixos/branches/upstart-0.6/; revision=18237
2009-11-07 01:17:56 +00:00
Eelco Dolstra
06fcb121fb
* Shut down PostgreSQL cleanly.
...
svn path=/nixos/branches/upstart-0.6/; revision=18236
2009-11-06 23:37:31 +00:00
Eelco Dolstra
18f2d75275
* Set a timezone in the PostgreSQL job. Otherwise database
...
initialisation will be incredibly slow (minutes instead of
seconds). An strace shows that it's continuously looking up
timezone information if TZ is empty.
svn path=/nixos/branches/upstart-0.6/; revision=18235
2009-11-06 22:56:47 +00:00
Eelco Dolstra
d7342c78d4
* Support pre-stop scripts. These are needed to cleanly shutdown
...
daemons such as Apache or PostgreSQL.
svn path=/nixos/branches/upstart-0.6/; revision=18234
2009-11-06 22:45:19 +00:00
Eelco Dolstra
83a9bf9a6a
* Change all the startOn / stopOn attributes to the Upstart 0.6 syntax
...
(e.g., startOn = "started foo" instead of startOn = "foo").
svn path=/nixos/branches/upstart-0.6/; revision=18230
2009-11-06 22:19:17 +00:00
Eelco Dolstra
6b0842ff52
svn path=/nixos/branches/upstart-0.6/; revision=18229
2009-11-06 21:51:28 +00:00
Eelco Dolstra
a60d83d3b4
svn path=/nixos/branches/upstart-0.6/; revision=18228
2009-11-06 21:39:18 +00:00
Eelco Dolstra
d545d08461
* In the network-interfaces task, emit an ip-up event if there is a
...
statically configured interface (i.e. we're not running dhclient).
Otherwise the ntpd job won't be triggered.
* Use the "-n" flag of "initctl emit" to send the event
asynchronously.
svn path=/nixos/branches/upstart-0.6/; revision=18227
2009-11-06 21:38:40 +00:00
Eelco Dolstra
4b2ff53ec6
* Don't stop jobs that are already stopped.
...
svn path=/nixos/branches/upstart-0.6/; revision=18226
2009-11-06 21:17:11 +00:00
Eelco Dolstra
82c3e2aa50
* Updated poweroff/reboot/maintenance mode for Upstart 0.6. Upstart
...
no longer emits specific events for those. Instead it emits a
"runlevel" event. The "runlevel" task starts the "shutdown" task to
perform the desired action.
* Upstart 0.6 no longer has a "shutdown" event, so "stop on shutdown"
no longer works. Therefore the shutdown task explicitly stops all
running Upstart jobs, before sending a TERM/KILL signal to all
remaining processes.
* Do a "chvt 1" at the start of the shutdown task to switch to the
console.
* Use /dev/console instead of /dev/tty1, since if somebody is logged
in on tty1, bad things will happen.
svn path=/nixos/branches/upstart-0.6/; revision=18224
2009-11-06 21:08:06 +00:00
Eelco Dolstra
676da4d87d
* Updated some more jobs.
...
svn path=/nixos/branches/upstart-0.6/; revision=18219
2009-11-06 19:20:09 +00:00
Eelco Dolstra
3fcb7c2cb5
* Set the nameserver.
...
svn path=/nixos/branches/upstart-0.6/; revision=18218
2009-11-06 19:19:46 +00:00
Eelco Dolstra
c0f732f079
* Work around a lack of laziness in the xserver.nix module.
...
svn path=/nixos/trunk/; revision=18216
2009-11-06 16:30:48 +00:00
Nicolas Pierron
e07f1e98db
* Revert 18115, 18150, 18135, 18112, 18107-18105.
...
Revert modifications done on apache-httpd configurations.
svn path=/nixos/trunk/; revision=18215
2009-11-06 16:23:25 +00:00
Eelco Dolstra
b9bfe7ed43
* Connect Upstart to the system bus.
...
svn path=/nixos/branches/upstart-0.6/; revision=18213
2009-11-06 15:59:23 +00:00
Eelco Dolstra
9fa2f12cc2
* Do some more jobs.
...
svn path=/nixos/branches/upstart-0.6/; revision=18212
2009-11-06 15:46:56 +00:00
Eelco Dolstra
903e92bde6
* Use Upstart's "export fork" feature to properly detect when a daemon
...
is "ready". This prevents ugly race conditions, e.g. HAL failing to
start because dbus hasn't finished starting yet.
* Support post-start scripts. These are executed after the job's main
process has started but before the job's "started" event is
emitted. For instance, the udev job uses this to perform "udevadm
trigger / settle" to create all devices. Previously this had to be
done in the pre-start script, so the daemon had to started in the
pre-start script as well.
svn path=/nixos/branches/upstart-0.6/; revision=18211
2009-11-06 15:23:16 +00:00
Marco Maggesi
ae23b68ee8
Add configurations for MIT kerberos.
...
svn path=/nixos/trunk/; revision=18203
2009-11-06 12:58:44 +00:00
Eelco Dolstra
5d240b99d5
* Work around a bug in HAL (it fails to start if $PATH is too long,
...
since it uses a 512-byte buffer somewhere).
svn path=/nixos/branches/upstart-0.6/; revision=18198
2009-11-06 11:31:57 +00:00
Eelco Dolstra
7011a9315f
* Use Upstart 0.6. Jobs are now in /etc/init instead of /etc/event.d.
...
svn path=/nixos/branches/upstart-0.6/; revision=18192
2009-11-06 10:43:38 +00:00
Eelco Dolstra
b581a56d79
* Define the Upstart package to use in one place.
...
svn path=/nixos/branches/upstart-0.6/; revision=18187
2009-11-06 09:36:35 +00:00
Eelco Dolstra
5fc4590ce5
* Fix indentation.
...
svn path=/nixos/branches/upstart-0.6/; revision=18186
2009-11-06 09:26:36 +00:00
Eelco Dolstra
124096e418
* Remember the original symbolic driver name.
...
svn path=/nixos/trunk/; revision=18185
2009-11-06 09:22:00 +00:00
Eelco Dolstra
3e9665dd96
* X server autoconfiguration. Rather than specifying a fixed video
...
driver (in services.xserver.videoDriver), the X server is now given
a set of drivers, and will use PCI ids to find the right one.
The only problem is that the choice of OpenGL driver (the
/var/run/opengl-driver symlink) depends on what driver is selected
at runtime (i.e. the NVIDIA implementation for "nvidia", and Mesa
for all other drivers). However this isn't a big problem right now
since "nvidia" isn't included in the default set of drivers anyway
for legal reasons.
* `services.xserver.resolutions' now defaults to [], meaning that the
X server should figure out the desired resolution(s) itself.
Likewise, `services.xserver.defaultDepth' defaults to 0 to let the X
server figure it out.
* Removed some options from xorg.conf that no longer appear needed
("Composite" and the DRI "Mode").
svn path=/nixos/trunk/; revision=18176
2009-11-06 00:59:03 +00:00
Lluís Batlle i Rossell
fe1f084728
Adding a new xorg driver: unichrome
...
svn path=/nixos/trunk/; revision=18163
2009-11-05 21:35:36 +00:00
Nicolas Pierron
72f804c9b2
* Fix subversion test and change the name of the "config" option to
...
"configuration" because it may interfered with sub-modules keywords.
svn path=/nixos/trunk/; revision=18155
2009-11-05 19:24:02 +00:00
Nicolas Pierron
7571055ad3
* Declare options for sub-services.
...
* Add deprecated options for "serviceType", "serviceName", "function" and
"config" without changing the behavior.
svn path=/nixos/trunk/; revision=18150
2009-11-05 18:21:03 +00:00
Nicolas Pierron
1952365a51
* Remove unused subservice syntax.
...
svn path=/nixos/trunk/; revision=18135
2009-11-05 13:34:01 +00:00
Eelco Dolstra
ad17a6dce3
* Changes related to the xorg-7.5 merge.
...
svn path=/nixos/trunk/; revision=18126
2009-11-04 22:44:40 +00:00
Eelco Dolstra
3f7eb694a9
* CUPS provides a dbus service.
...
svn path=/nixos/trunk/; revision=18125
2009-11-04 22:44:21 +00:00
Nicolas Pierron
8734b7103e
* Remove needs to call getPort to access the server port. This is made
...
possible by using sub-modules arguments.
svn path=/nixos/trunk/; revision=18112
2009-11-04 18:14:42 +00:00
Nicolas Pierron
0e22df1587
* Use sub-modules for httpd virtual hosts. This add documentation entries
...
and allow non-intrusive extensions of virtual hosts.
svn path=/nixos/trunk/; revision=18107
2009-11-04 17:00:53 +00:00
Nicolas Pierron
ff1d9969fb
* re-indent per-server-options.nix content.
...
svn path=/nixos/trunk/; revision=18106
2009-11-04 17:00:48 +00:00
Nicolas Pierron
063224bc84
* Convert per-server-options into a module.
...
svn path=/nixos/trunk/; revision=18105
2009-11-04 17:00:42 +00:00
Sander van der Burg
46558b31a0
Added ejabberd to the systemPackages and fixed some command line arguments. This will make the ejabberd service working again
...
svn path=/nixos/trunk/; revision=18070
2009-11-02 12:13:09 +00:00
Nicolas Pierron
8c5b200164
* boor.loader.grub.device can only be defined once.
...
* Replace an obscure piece of code by its equivalent based on the
recursiveUpdate function. Undefined the obsolete name of
boot.grubDevice to avoid conflicts.
svn path=/nixos/trunk/; revision=18049
2009-10-30 11:57:23 +00:00
Eelco Dolstra
b86e8208d5
* Doh! The mount options weren't passed properly.
...
svn path=/nixos/trunk/; revision=18047
2009-10-30 08:49:35 +00:00
Eelco Dolstra
11022e8d9f
* Back out r17946 and 17948 because it doesn't work. I've seen it
...
fail to update /etc twice now. It's also unnecessarily complex
IMHO (see nix-dev).
svn path=/nixos/trunk/; revision=18045
2009-10-30 08:37:08 +00:00
Nicolas Pierron
c195493a32
* Add a hacky for-loop to fix the usage of the continue keyword. (NIXOS-85)
...
The continue keyword was previously used to mount the next device, but
the loop in has been removed. (see r17919)
svn path=/nixos/trunk/; revision=17973
2009-10-27 10:45:18 +00:00
Michael Raskin
ca6f5e6cd4
Further reducing writes on boot.. Do not copy /etc unless it changed
...
svn path=/nixos/trunk/; revision=17948
2009-10-24 00:03:13 +00:00
Michael Raskin
893f13bb14
Some boot optimisations attempted. My system boots a few times faster now, and I cannot see how these can break things.
...
svn path=/nixos/trunk/; revision=17946
2009-10-23 20:30:12 +00:00
Marc Weber
4f006e49bf
openvpn was broken by jobAttrs. fixed
...
svn path=/nixos/trunk/; revision=17940
2009-10-23 11:30:54 +00:00
Sander van der Burg
ac5bc4a68a
Added XDMCP option to KDM
...
svn path=/nixos/trunk/; revision=17938
2009-10-23 10:54:35 +00:00
Rob Vermaas
5103c7a872
list possible logformats for apache and added example
...
svn path=/nixos/trunk/; revision=17929
2009-10-22 17:37:06 +00:00
Rob Vermaas
9e80ca48cb
added option to specify logformat to apache httpd, defaults to common (like it was until now)
...
svn path=/nixos/trunk/; revision=17923
2009-10-22 14:36:54 +00:00
Eelco Dolstra
1e1ae9cd1e
* Don't squeeze all the filesystem option values into one environment
...
variable, since they might get confused (NIXOS-84).
svn path=/nixos/trunk/; revision=17919
2009-10-22 07:46:30 +00:00
Eelco Dolstra
feeff52285
* Ugly hack to get HAL to start at boot time. Sometimes it fails
...
without any error message in the log (maybe ConsoleKit related?).
svn path=/nixos/trunk/; revision=17907
2009-10-21 09:41:32 +00:00
Michael Raskin
35abca4e7a
Forward-port sshd fixes to iso-minimal-fresh-kernel. By the way, maybe we should finalyy decide what to do with kernel update and corresponding ISO update (to fresh-kernel proposal or otherwise)
...
svn path=/nixos/trunk/; revision=17840
2009-10-16 04:27:59 +00:00
Marc Weber
fceadcbef7
--redo -> --fast
...
svn path=/nixos/trunk/; revision=17839
2009-10-15 23:39:57 +00:00
Eelco Dolstra
5dfaf565bf
* On the CD or on a newly installed system, create the root account
...
with an empty password, rather than with a hashed empty password.
The latter is a security risk, because it allows remote root logins
if a user enables sshd before setting a proper root password.
* Allow empty passwords for login and slim, but nothing else.
svn path=/nixos/trunk/; revision=17833
2009-10-15 14:41:59 +00:00
Eelco Dolstra
77ec877a8c
* Fix the background of the manual.
...
svn path=/nixos/trunk/; revision=17832
2009-10-15 14:35:10 +00:00
Eelco Dolstra
da5f745603
* You need an override here, otherwise bad things happen.
...
svn path=/nixos/trunk/; revision=17831
2009-10-15 14:32:15 +00:00
Eelco Dolstra
762c13b83e
* Fix the Rogue job.
...
svn path=/nixos/trunk/; revision=17830
2009-10-15 14:02:24 +00:00
Eelco Dolstra
e055085ac1
svn path=/nixos/trunk/; revision=17823
2009-10-15 12:32:33 +00:00
Eelco Dolstra
f6f5d0414e
* Run the nix-daemon with a lower I/O priority so that it doesn't
...
interfere with interactive tasks as much (hopefully).
svn path=/nixos/trunk/; revision=17820
2009-10-15 11:25:15 +00:00
Sander van der Burg
f57f344996
Changed vboxvideo identifier to virtualbox for clarity
...
svn path=/nixos/trunk/; revision=17816
2009-10-15 09:31:30 +00:00
Ludovic Courtès
6472ee4d20
X11: Always honor ~/.xsession.
...
See http://thread.gmane.org/gmane.linux.distributions.nixos/2879 .
svn path=/nixos/trunk/; revision=17814
2009-10-15 08:27:51 +00:00
Marc Weber
f3472f7163
new nixos-rebuild shortcut for --no-fetch --no-nix-build --show-trace called --redo
...
svn path=/nixos/trunk/; revision=17813
2009-10-14 23:56:11 +00:00
Marc Weber
ba496e25c4
allow starting of sshd using "start sshd" - but don't start it on
...
startup automatically because root password is empty by default.
svn path=/nixos/trunk/; revision=17811
2009-10-14 21:48:12 +00:00
Marc Weber
e611266285
Revert "add /root/my-firmware to the list of firmware directories"
...
This reverts rev 17809 - I missed the update
svn path=/nixos/trunk/; revision=17810
2009-10-14 21:44:25 +00:00
Marc Weber
70b4e1a371
add /root/my-firmware to the list of firmware directories
...
svn path=/nixos/trunk/; revision=17809
2009-10-14 21:35:39 +00:00
Lluís Batlle i Rossell
336d33e591
Adding the wifi nic rt73 firmware into the nixos cds.
...
I'm not sure if I had to add the module file reference in "required", or all
modules are properly loaded.
svn path=/nixos/trunk/; revision=17800
2009-10-14 13:10:41 +00:00
Eelco Dolstra
e4defbe8bd
* Bring back loading of firmware from /root/test-firmware.
...
svn path=/nixos/trunk/; revision=17797
2009-10-14 09:38:56 +00:00
Ludovic Courtès
290f41bd9f
GRUB: "Grub" -> "GRUB".
...
svn path=/nixos/trunk/; revision=17793
2009-10-13 21:39:23 +00:00
Ludovic Courtès
f9541e0d12
Add GRUB 2 support.
...
svn path=/nixos/trunk/; revision=17792
2009-10-13 21:39:18 +00:00
Marc Weber
ccd2a0b617
sudo default configFile: replace outdated comment
...
svn path=/nixos/trunk/; revision=17790
2009-10-13 21:29:30 +00:00
Lluís Batlle i Rossell
e9702320bf
Fixing nvidiaLegacy /var/run/opengl-driver
...
svn path=/nixos/trunk/; revision=17786
2009-10-13 17:52:58 +00:00
Lluís Batlle i Rossell
a347979be5
Adding nvidiaLegacy xorg option for suspend to work
...
svn path=/nixos/trunk/; revision=17785
2009-10-13 17:52:49 +00:00
Sander van der Burg
8457873334
The 'resolution section' is not generated in the xorg.conf when using the vboxvideo driver. This allows us to perform dynamic resolution resizing
...
svn path=/nixos/trunk/; revision=17784
2009-10-13 15:16:30 +00:00
Sander van der Burg
4eea2539c1
Added udev permissions for virtualbox guest additions
...
svn path=/nixos/trunk/; revision=17783
2009-10-13 15:05:06 +00:00
Sander van der Burg
b9d9802c45
Pass virtualbox package as HAL package, so that the guest mouse cursor will follow the host mouse cursor
...
svn path=/nixos/trunk/; revision=17781
2009-10-13 14:30:37 +00:00
Sander van der Burg
50902d2e58
Added some basic VirtualBox driver support. Input driver and dynamic resizing still remains on my todo list
...
svn path=/nixos/trunk/; revision=17779
2009-10-13 13:56:30 +00:00
Eelco Dolstra
1581d91330
* Fix the job name of the Nix daemon.
...
svn path=/nixos/trunk/; revision=17776
2009-10-13 10:09:06 +00:00
Nicolas Pierron
24cbefd7a8
Fix example value of httpd.
...
svn path=/nixos/trunk/; revision=17774
2009-10-13 09:49:26 +00:00
Eelco Dolstra
eba8f94069
* jobAttrs -> jobs.
...
svn path=/nixos/trunk/; revision=17769
2009-10-12 18:09:34 +00:00
Eelco Dolstra
40c9057a49
* Remove the obsolete "jobs" option.
...
svn path=/nixos/trunk/; revision=17765
2009-10-12 17:32:30 +00:00
Eelco Dolstra
d982f23f20
* Convert the remaining jobs to jobAttrs style.
...
svn path=/nixos/trunk/; revision=17764
2009-10-12 17:27:57 +00:00
Eelco Dolstra
9943e0762e
* Update some more modules.
...
svn path=/nixos/trunk/; revision=17763
2009-10-12 17:09:38 +00:00
Eelco Dolstra
e91d882a94
* Converted modules that were still using the old (concrete syntax)
...
style of declaring Upstart jobs. While at it, converted them to the
current NixOS module style and improved some option descriptions.
Hopefully I didn't break too much :-)
svn path=/nixos/trunk/; revision=17761
2009-10-12 16:36:19 +00:00
Eelco Dolstra
4a78ef25e7
* Start mysql automatically on startup.
...
svn path=/nixos/trunk/; revision=17755
2009-10-12 11:30:43 +00:00
Michael Raskin
32229e0c05
Make NixOS harder to kill on boot by leaving stale locks for mtab
...
svn path=/nixos/trunk/; revision=17734
2009-10-09 16:09:56 +00:00
Eelco Dolstra
679c3f9295
* Fix the xfsprogs/jfsutils attribute names. TODO: these shouldn't be
...
listed in three different places. The set of "rescue" packages
should be factored out into a separate module.
svn path=/nixos/trunk/; revision=17727
2009-10-08 13:10:08 +00:00
Rob Vermaas
a39b238e69
symlink handling mode for sitecopy backup
...
svn path=/nixos/trunk/; revision=17716
2009-10-08 11:08:45 +00:00
Rob Vermaas
81e37d8475
added deps for activation scripts of backup modules
...
svn path=/nixos/trunk/; revision=17714
2009-10-08 09:29:16 +00:00
Rob Vermaas
8d9c51a991
activation script should have unique name
...
svn path=/nixos/trunk/; revision=17706
2009-10-07 20:05:08 +00:00
Nicolas Pierron
2e34baba3b
Rename environment.extraPackages to environment.systemPackages.
...
svn path=/nixos/trunk/; revision=17705
2009-10-07 17:14:25 +00:00
Sander van der Burg
43b3ccc620
remove unnecessary concatstrings
...
svn path=/nixos/trunk/; revision=17699
2009-10-07 13:12:45 +00:00
Rob Vermaas
00668de9f1
removed unnecessary optional
...
svn path=/nixos/trunk/; revision=17697
2009-10-07 13:00:37 +00:00
Rob Vermaas
ddf7a784e7
* removed unnecessary comments
...
svn path=/nixos/trunk/; revision=17696
2009-10-07 12:54:22 +00:00
Rob Vermaas
cc5d5b3e77
* removed unnecessary comments
...
svn path=/nixos/trunk/; revision=17695
2009-10-07 12:53:59 +00:00
Rob Vermaas
06f26e1ad0
* removed unnecessary comments
...
svn path=/nixos/trunk/; revision=17694
2009-10-07 12:53:27 +00:00
Rob Vermaas
e6e3c11dba
* moved example to example attribute, changed description of sitecopy backup module
...
svn path=/nixos/trunk/; revision=17693
2009-10-07 12:52:04 +00:00