Cgroups are handled by systemd now. Systemd's cgroup support does not
do all the things that cgrulesengd does, but they're likely to
interact poorly with each other.
We now just have a simple attribute called "version24" which replaces all those
pesky versionOlder that were spreading throughout the file and makes things way
more readable.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
By default the path is determined related to ServerRoot. Unfortunately
ServerRoot is pointing to the Nix store and the web server can't write to it.
We now create a directory called "runtime" withen the stateDir and point
DefaultRuntimeDir to it.
For more information on the DefaultRuntimeDir directive, please see:
http://httpd.apache.org/docs/2.4/mod/core.html#defaultruntimedir
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
NameVirtualHost no longer has any effect on version 2.4 and just emits ugly
warnings, so let's not use it if we use 2.4.
More information: http://httpd.apache.org/docs/2.4/upgrading.html#misc
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
The Order/Deny directives are deprecated in version 2.4, so we're going to
define two wrappers for allDenied and allGranted in order to properly generate
configurations for both version 2.2 and 2.4.
For more information an access control changes, see:
http://httpd.apache.org/docs/2.4/upgrading.html#access
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Now, MPMs can be loaded at runtime and it's no longer required to compile in one
of the MPM modules statically. So, if version is >= 2.4, load the MPM module
corresponding to the multiProcessingModule value of the service module.
For details, please see: http://httpd.apache.org/docs/2.4/mpm.html
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Beginning with version 2.3, the authn were refactored. As a result, authn_alias
is now part of the new module authn_core, so let's use authn_core instead of
authn_alias.
For details please see: http://httpd.apache.org/docs/2.4/upgrading.html#misc
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
My main reason for adding this is the ability to turn off helpers
altogether. If you are not using any of the special protocols, keeping
them turned off is safest, and in case you do want to use them, it's
best to configure them through the new CT target for your network
topology. Perhaps some sane defaults for nixos can be examined in the
future.
This change has no impact if you don't touch the added options, so no
need to adapt.
This is meant to replace /proc/sys/net/ipv4/conf/*/rp_filter, which
only works for ipv4. Furthermore, it's nicer to handle this kind of
filtering in the firewall.
There are some more subtle differences, please see:
https://home.regit.org/netfilter-en/secure-use-of-helpers/
I chose to enable this by default (when the firewall is enabled) as
it's a good idea in general. Only people with advanced routing needs
might not want this, but I guess they don't use the nixos firewall
anyway and use a custom solution. Furthermore, the option only becomes
available in kernel 3.3+, so conservative nixos users that just stick
to the default kernel will not need to act now just yet.
For each statically configured interface, we now create a unit
‘<interface>-cfg.service’ which gets started as soon as the network
device comes up. Similarly, each bridge defined in
‘networking.bridges’ and virtual interface in ‘networking.interfaces’
is created by a service ‘<interface>.service’.
So if we have
networking.bridges.br0.interfaces = [ "eth0" "eth1" ];
networking.interfaces =
[ { name = "br0";
ipAddress = "192.168.1.1";
}
];
then there will be a unit ‘br0.service’ that depends on
‘sys-subsystem-net-devices-eth0.device’ and
‘sys-subsystem-net-devices-eth1.device’, and a unit ‘br0-cfg.service’
that depends on ‘sys-subsystem-net-devices-br0.device’.
The special handling for cronjobs should probably move to the cron
module (logcheckIgnore = bool option) in the future, as it's more
natural to just declare a cronjob, and mark it as "log-ignored",
instead of adding cronjobs through logcheck.
But as systemCronjobs is not an attrset yet (just simple strings),
this would require adding an attrset for cronjobs or parsing strings
in the nix language to get hold of the cron-user and command.
So for now, I keep the interface within logcheck's module.
However SLIM is still broken and you have to create a
/usr/lib/dri/fglrx_dri.so symlink pointing to
/run/opengl-driver/lib/fglrx_dri.so
At least fgl_glxgears shows 10 times more frames per second now
The upower daemon needs the gdbus command (which is weird given that
upower links against dbus_glib, but ah well...). This fixes suspend
in KDE with systemd.
Alsa-utils provides a udev rule to restore volume settings, so use
that instead of restoring them from a systemd service. The
"alsa-store" service saves the settings on shutdown.
So instead of:
boot.systemd.services."foo".serviceConfig =
''
StartLimitInterval=10
CPUShare=500
'';
you can say:
boot.systemd.services."foo".serviceConfig.StartLimitInterval = 10;
boot.systemd.services."foo".serviceConfig.CPUShare = 500;
This way all unit options are available and users can set/override
options in configuration.nix.
This makes it easier for systemd to track it and avoids race conditions such as
this one:
systemd[1]: PID file /run/sshd.pid not readable (yet?) after start.
systemd[1]: Failed to start SSH Daemon.
systemd[1]: Unit sshd.service entered failed state.
systemd[1]: sshd.service holdoff time over, scheduling restart.
systemd[1]: Stopping SSH Daemon...
systemd[1]: Starting SSH Daemon...
sshd[2315]: Server listening on 0.0.0.0 port 22.
sshd[2315]: Server listening on :: port 22.
sshd[2335]: error: Bind to port 22 on 0.0.0.0 failed: Address already in use.
sshd[2335]: error: Bind to port 22 on :: failed: Address already in use.
sshd[2335]: fatal: Cannot bind any address.
systemd[1]: Started SSH Daemon.
When spamd isn't running as 'root', it cannot access the usual ~/.spamassassin
path where user-specific files normally reside. Instead, we use the path
/var/lib/spamassassin-<user> to store those home directories.
* Add group 'networkmanager' and implement polkit configuration
that allows users in this group to make persistent, system-wide
changes to NetworkManager settings.
* Add support for ModemManager. 3G modems should work out of the
box now (it does for me...). This introduces a dependency on
pkgs.modemmanager.
* Write NetworkManger config file to Nix store, and let the
daemon use it from there.
I had some problems with LDAP user lookups not working properly
at boot. I found that invalidating passwd and group on the
ip-up event (when nscd-invalidate starts) helped a bit.
Logind sessions are more generally useful than for device ownership.
For instances, ssh logins can be put in their own session (and thus
their own cgroup).
Subtle: dhcpcd.service would call resolvconf during shutdown, which in
turn would start invalidate-nscd.service, causing the shutdown to be
cancelled. Instead, give nscd.service a proper reload action, and do
"systemctl reload --no-block nscd.service". The --no-block is
necessary to prevent that command from waiting until a timeout occurs
(bug in systemd?).
This especially annoyed me whenver I was doing nixos-rebuild switch and getting
logged out on all consoles. With this there now is services.mingetty.dontRestart
for heavy VT users to deactivate this behaviour.
The option is disabled by default so that previously existing installations
aren't affected.
If you'd like to migrate to the fixed numeric id for Apache, set "fixUidAndGid
= true", edit the file "/etc/groups" and replace the old GID value with 54.
(NixOS can't do that for you because it refuses to change a GID that identifies
the primary group of a user.) Then run
find / -xdev -uid $oldUID -exec chown 54 {} +
find / -xdev -gid $oldGID -exec chgrp 54 {} +
to update ownership of all files that are supposed to be owned by Apache.
- The new option 'apacheHttpd' determines the version of the Apache
HTTP Server that's being used by this module. The default version
is Apache 2.2.x, as before.
- The new option 'configFile' allows users specify their own custom
config file for the web server instead of being limited to the one
that this module generates.
Ugly hack to get around the error "a string that refers to a store
path cannot be appended to a path". The underlying problem is that
you cannot do
"${./file1} ${./file2}"
but you can do
" ${./file1} ${./file2}"
Obviously we should allow the first case as well.
This allows hiding the implementation details for how to represent logstash
config types that don't directly map to nix expressions, particularly floats,
hashes, and name-value pair sets with repeated names. Instead of setting
__type and value directly, the user now uses these convenience functions to
generate their logstash config.
Since the logstash config file seemed very similar to a nixexpr, I decided
to map directly from nixexprs to logstash configs. I didn't realize until
too far in that this solution was probably way over-engineered, but it
works.
The new option ‘skins’ allows specifying a list of directories
providing skins to be added to the MediaWiki installation. The
‘defaultSkin’ option just sets the default.
Enabled a bunch of units that ship with systemd. Also added an option
‘boot.systemd.units’ that can be used to define additional units
(e.g. ‘sshd.service’).
I remember the 'named' log was giving annoying messages on systems not ipv6
capable (I can't recall if lacking the kernel ipv6 code or unconfigured ipv6
addresses).
svn path=/nixos/trunk/; revision=34419
are included in the manual, so this causes a different manual to be
built for each machine.
* Clean up indentation of cntlm module.
svn path=/nixos/trunk/; revision=34387
probably lots of others). The $PATH used to invoke the filter
didn't contain Ghostscript and Perl, so it silently fails. (A nice
property of CUPS is that it will just silently discard the job when
that happens, so you need to set LogLevel to "debug" to see this.)
Fortunately, CUPS now has a "SetEnv" option to set $PATH explicitly.
Also, remove config.system.path from the PATH of CUPS' Upstart job.
It seems to serve no purpose.
svn path=/nixos/trunk/; revision=34244
interfaces black-listed for dhcpcd via configuration.nix. I use this option to
disable DHCP for "veth*" interfaces, which are created by LXC for use inside of
virtual machines.
svn path=/nixos/trunk/; revision=34018
smart shutdown mode, Postgres waits until all
active connections have closed, which can take an
unbounded amount of time.
svn path=/nixos/trunk/; revision=33959
lines below a certain marker. This is undesirable because commands
like "ssh-copy-id" add keys to the end of the file. Instead mark
all automatically added lines individually.
svn path=/nixos/trunk/; revision=33918
were obtained from the NixOS channel. "nixos-install" copies this
to the installed system as well.
* In the installation CD, set GC_INITIAL_HEAP_SIZE to a low value for
the benefit of memory-constrained environments.
svn path=/nixos/trunk/; revision=33887
challenge-response is an authentication method that does not need the
plain text password to be emitted over the (encrypted) connection.
This is nice if you don't fully trust the server.
It is enabled (upstream) by default.
To the end user, it still looks like normal password authentication,
but instead of sending it, it is used to hash some challenge.
This means that if you don't want passwords to be used ever at all,
and just stick to public key authentication, you probably want to
disable this option too.
svn path=/nixos/trunk/; revision=33513
wpa_gui or wpa_cli.
Comes with a default wpa_supplicant.conf, which gets updated through
aforementioned utilities.
svn path=/nixos/trunk/; revision=33510
You can now set the forwardX11 config option for the ssh client and server separately.
For server, the option means "allow clients to request X11 forwarding".
For client, the option means "request X11 forwarding by default on all connections".
I don't think it made sense to couple them. I might not even run the server on some machines.
Also, I ssh to a lot of machines, and rarely want X11 forwarding. The times I want it,
I use the -X/-Y option, or set it in my ~/.ssh/config.
I also decoupled the 'XAuthLocation' logic from forwardX11.
For my case where ssh client doesn't want forwarding by default, it still wants to set the path for the cases I do need it.
As this flag is the one that pulls in X11 dependencies, I changed the minimal profile and the no-x-libs config to check that instead now.
svn path=/nixos/trunk/; revision=33407
delete routes and addresses when it quits. This causes those routes
and addresses to stick around forever, since dhcpcd won't delete
them when it runs next (even if it acquires a new lease on the same
interface). This is bad; in particular the stale (default) routes
can break networking.
The downside to removing "persistent" is that you should never ever
do "stop dhcpcd" on a remote machine configured by dhcpcd.
svn path=/nixos/trunk/; revision=33388
The VirtualBox build in Nixpkgs is insecure because it uses the
"--disable-hardened" flag, which disables some checks in the
VirtualBox kernel module. Since getting rid of that flag looks like
too much work, it's better to ensure that only explicitly permitted
users have access to VirtualBox.
* Drop the 666 permission on "sonypi" because it's not clear why that
device should be world-writable.
svn path=/nixos/trunk/; revision=33301
monitor the postgres process directly (so that it can be restarted
if necessary), let Upstart send SIGTERM to postgres to shut it down
gracefully. Also drop the Mediawiki references.
svn path=/nixos/trunk/; revision=33262
It needs udevd to be running because the modules may require
firmware. Thanks to Mathijs and Arie for pointing this out.
svn path=/nixos/trunk/; revision=33234
