default.
It does not look very modular, and the manual may not look very good, but I think it
works better than before. And setting cron.enable = false and fcron.enable = true works fine.
svn path=/nixos/trunk/; revision=24199
the random atd failures at boot time, which seem to be caused by a
race with the creation of /dev/null or something.
svn path=/nixos/trunk/; revision=24077
tsocks leaks DNS requests and is less secure than torsocks.
torsocks is a fork of tsocks that is patched specifically for Tor.
svn path=/nixos/trunk/; revision=24012
from udev rules. This is slightly tricky because udev has a
512-character limit on environment variables, so we create a symlink
tree to work around this.
svn path=/nixos/trunk/; revision=23822
* Moved some scriptlets to the appropriate modules.
* Put the scriptlet that sets the default path at the start, since it
never makes sense not to have it there. It no longer needs to be
declared as a dependency.
* If a scriptlet has no dependencies, it can be denoted as a plain
string (i.e., `noDepEntry' is not needed anymore).
svn path=/nixos/trunk/; revision=23762
suspending the machine, it also slowed down the graphics (specially 2D) quite a lot.
firefox flash, firefox scrolling was a pain.
I'll leave that up to the nixos user with the cfg.deviceSection.
svn path=/nixos/trunk/; revision=23407
Otherwise the sound card drivers may not have been loaded yet, and
restoring the mixer settings will fail. Also, since the ALSA job
itself will fail, it won't save the mixer settings on shutdown.
svn path=/nixos/trunk/; revision=23245
synaptics driver for all touchpads (unless the "dev" option is set).
* Get rid of some synaptics options: SHMConfig, Repeater (obsolete);
*Edge (usually auto-detected), Protocol (use auto-detect instead).
svn path=/nixos/trunk/; revision=23092
higher than 800x600 work.
* Add a "Monitor" statement to the "Screen" section, because otherwise
the Monitor section is ignored.
svn path=/nixos/trunk/; revision=23068
and enabled desktop manager (e.g. "kde" if KDE is enabled, and
"xterm" if nothing is explicitly enabled). This means that you
don't have to write
services.xserver.desktopManager.default = "kde4";
anymore in addition to
services.xserver.desktopManager.kde4.enable = true;
to make KDE the default desktop environment.
* Remove the "none + none" session type.
* Remove the "+ none" string at the end of session types. I.e. now
it's "kde", not "kde + none".
* In kdm, add coreutils to its SystemPath so that it can remove the
temporary directories in /tmp that it creates.
svn path=/nixos/trunk/; revision=23036
users don't have to write
services.xserver.displayManager.kdm.enable = true;
services.xserver.displayManager.slim.enable = false;
to enable kdm, but just
services.xserver.displayManager.kdm.enable = true;
svn path=/nixos/trunk/; revision=23033
Setting to the synaptics default speeds the speeds I like. I think we were having
defaults still from the time the values meant some different speeds.
The 'synclient' program now does not work, but the 'xinput' program (xorg.xinput)
can modify in runtime the touchpad settings too.
svn path=/nixos/trunk/; revision=22904
of DBus configuration directories. Thus packages with DBus
configuration files installed in the default profile will be found
automatically. (It would be nice to include $HOME/.nix-profile in
the session bus search path, but I don't think that's possible.)
svn path=/nixos/trunk/; revision=22737
${configDir}/system.conf. This is necessary to enable dbus to
reload its configuration on SIGHUP after a nixos-rebuild. (The
daemon cannot be restarted because then console-kit-daemon loses its
state.)
* Generate a proper /etc/dbus-1/session.conf.
svn path=/nixos/trunk/; revision=22572
cause restarting of jobs to hang indefinitely because the required
"start on" condition never triggers.
For instance, after "stop nfs-kernel-nfsd", "start nfs-kernel-nfsd"
will hang until we do "stop portmap; start portmap". This is due to
the "starting nfs-kernel-nfsd and started portmap" condition in
the nfs-kernel-mountd job. Apparently, because portmap is already
running, the condition "started portmap" never happens because no
event is emitted.
svn path=/nixos/trunk/; revision=22562
the ‘nfs-kernel-statd’ task.
* Work around an apparent bug in Upstart: the ‘mountall’ task cannot
be restarted because of the ‘starting mountall’ condition in the
statd task. So instead make ‘mountall’ depend on ‘started
nfs-kernel-statd’.
svn path=/nixos/trunk/; revision=22508
SABnzbd makes Usenet as simple and streamlined as possible by automating everything we can. All you have to do is add an .nzb. SABnzbd takes over from there, where it will be automatically downloaded, verified, repaired, extracted and filed away with zero human interaction.
http://sabnzbd.org/
svn path=/nixos/trunk/; revision=22446
monitor the life of postfix)
Adding an assert to upstart jobs, so those with preStop will always need an exec or
script, otherwise the preStop will not be run.
svn path=/nixos/trunk/; revision=22225
shutdown. (Portmap and statd are needed during shutdown to unmount
NFS volumes but have open files in /var/run.)
* In the shutdown job, don't kill PIDs belonging to Upstart jobs that
are still running. If they don't stop on the "starting shutdown"
event, then they're needed during shutdown (such as portmap and
statd).
* NFS test: test whether the shutdown quickly unmounts NFS volumes
(i.e. whether portmap and statd are still running).
svn path=/nixos/branches/boot-order/; revision=22204
README (i.e. for the server: exportfs, mountd, statd, nfsd,
sm-notify; for the client: statd / sm-notify before mountall). This
is important to allow locking to work correctly.
svn path=/nixos/branches/boot-order/; revision=22196
a daemon (it just starts some kernel threads). In the post-stop
script, stop the kernel threads.
* exportfs: fix the createMountPoints option.
* Mount the nfsd filesystem on /proc/fs/nfsd because mountd prefers
this.
svn path=/nixos/branches/boot-order/; revision=22187
it allows the `mountall' task to start mounting filesystems as soon
as udev is running and devices become available (i.e. it doesn't
have to wait for all devices). This means that some jobs should
depend on "stopped udevtrigger" instead of "started udev".
svn path=/nixos/branches/boot-order/; revision=22167
during boot. Mountall ensures that these are done in the right
order. It's informed by udev about devices becoming available. It
emits some Upstart events upon reaching certain states, in
particular ‘local-filesystems’ after all local filesystems have been
mounted successfully, ‘remote-filesystems’ after all network
filesystems have been mounted, and ‘filesystem’ (sic) when all
filesystems have been mounted.
Currently, if a filesystem fails to mount or doesn't exist, then the
mingettys won't start and the boot will appear to hang. This is
because mountall doesn't emit an event for failing filesystems and
waits indefinitely for the filesystems to become available.
* The ‘filesystems’ and ‘swap’ Upstart jobs are gone. (Support for
encrypted swap devices is temporarily gone.)
* Generate a proper /etc/fstab from the ‘fileSystems’ and
‘swapDevices’ options.
svn path=/nixos/branches/boot-order/; revision=22148
`su'.
* The `usermod' from `shadow' allows setting a supplementary group
equal to the user's primary group, so the special hack for the
`nixbld' group is no longer needed.
* Removed /etc/default/passwd since it's not used by the new passwd.
The hash is configured in pam_unix.
* Move some values for `security.setuidPrograms' and
`security.pam.services' to the appropriate modules.
svn path=/nixos/trunk/; revision=22107
to use the standard (coreutils) tools.
* Use util-linux's `switch_root' to switch over to the target root
FS. It automatically moves over the /dev, /proc and /sys from stage
1, so stage 2 doesn't need to set them up again.
svn path=/nixos/trunk/; revision=22085
or Google Earth) on 64-bit NixOS on NVIDIA hardware. The 32-bit
OpenGL library is symlinked from /var/run/opengl-driver-32, which is
added to the LD_LIBRARY_PATH so that 32-bit binaries can find it.
svn path=/nixos/trunk/; revision=22062
requieres a patch in openssh that I just commited to nixpkgs)
Before this, in the shell spawned, backspace could not work over UTF-8 strings in the readline.
svn path=/nixos/trunk/; revision=21679
I made the system sw path include /etc/xdg - awesome looks for some file
in the XDG_CONFIG_DIRS, which in bashrc is set to point to the profiles/etc/xdg
svn path=/nixos/trunk/; revision=21675
I kept the defaults as they where, to avoid surprises.
(150 httpd processes simultaneously answering? Too much for my machines)
svn path=/nixos/trunk/; revision=21220
- Implemented initialScript option to configure database properties on first startup (such as granting permissions)
svn path=/nixos/trunk/; revision=21135
We could not start on 'filesystems', because filesystems is written as an upstart task.
Additionally, as upstart calls the postfix start/stop script and it does not act as a
daemon, we write it as a preStart/postStop job. Then we don't have monitoring or respawn,
but at least upstart does not get confused on its state.
svn path=/nixos/trunk/; revision=21061
"sshd" because changing it to "opensshd" causes breakage (like the
activation script saying "useradd: UID 2 is not unique."). Also,
OpenSSH requires it to be named "sshd", I think.
svn path=/nixos/trunk/; revision=20577
The file contents were taken as a file path. This resulted in a system with a totally broken /etc:
lrwxrwxrwx 1 root nixbld 51 22 feb 21:45 bashrc -> /nix/store/gh71a6w50cxrl4124kxfn24yi0b7aaka-useradd
lrwxrwxrwx 1 root nixbld 44 22 feb 21:45 nix.conf -> 192.168.1.4(rw,no_root_squash,no_all_squash)
lrwxrwxrwx 1 root nixbld 58 22 feb 21:45 inputrc -> /nix/store/1czhdj7q74dc556frqrh51jyshfsxhl3-bashrc-user.sh
lrwxrwxrwx 1 root nixbld 51 22 feb 21:45 nsswitch.conf -> /nix/store/qsgsli992hd1g8245d8am9izn9xmw90x-inputrc
lrwxrwxrwx 1 root nixbld 20 22 feb 21:45 exports -> /home/sheevaplugroot
Notice that the inputrc has strange contents. In my case, that disabled me to type 's' or 'i' (at least) in any new interactive shell.
If you notice, the 'exports' symlink should point to a store file, which contents had to look like:
/home/sheevaplugroot 192.168.1.4(rw,no_root_squash,no_all_squash)
This patch achieves this later behaviour rather than the former.
svn path=/nixos/trunk/; revision=20181
create an empty job `foo' if the condition is false. Instead use
`jobs = optionalAttrs condition { foo = { ... }; }'.
* Enable portmap automatically when using the NFS server or client.
svn path=/nixos/trunk/; revision=20178
that it can be restarted. Zabbix is kind of hard to monitor, so use
a trick with an open fifo to detect when it goes down.
svn path=/nixos/trunk/; revision=20039
and running. `pg_ctl status' merely checks whether PostgreSQL is
running, not whether it is already accepting connections. This
causes Upstart jobs that depend on PostgreSQL to fail.
svn path=/nixos/trunk/; revision=20024
replaced by `services.apache.phpOptions' (of type string).
* Allow Apache subservices to add to phpOptions.
* Set the TZ environment variable in Apache.
* Updated the Zabbix web interface.
svn path=/nixos/trunk/; revision=20023
supplied by the lvm package). This makes the "lvm" Upstart task
unnecessary. Also, we now get /dev/disk/by-{label,uuid} symlinks
for LVM logical disks.
svn path=/nixos/trunk/; revision=19300
readd r19267 (the issue should be fixed now)
Eelco Dolstra and Nicolas Pierron both kept asking me to pay attention
to the rendered manual. There is one catch: example settings such as
pkgs.kernelPackages_2_6_25 are correct however they don't render
properly. Moreover you don't want those examples to be evaluated (maybe
compiling a kernel ?) when building the manual only.
So use Strings and add a copy & paste note.
This is still a hacky. Maybe a kind of typed "verbatim" expression
should be added (?)
svn path=/nixos/trunk/; revision=19281
automatically. This is mostly useful for testing. (KDM also has
this feature, but it's nice not to depend on KDE for non-KDE tests.)
svn path=/nixos/trunk/; revision=19239
use exec so that upstart knows when automount shuts down.
If a mount is used upstart will send SIGKILL.
Automount doesn't clean up. So unmount everything using a post script.
svn path=/nixos/trunk/; revision=19105
trunk) doesn't have a -s flag. 0.7.0 in the stdenv branch
presumably does, but it's marked as unstable upstream.
svn path=/nixos/trunk/; revision=19047
qemu_kvm. Installation doesn't take place yet. VM is started
printing a remote controlled "Hello".
This serves as example how to run a vm within a bulid job.
svn path=/nixos/trunk/; revision=18887
of usual system counters).
It sets up some cron jobs for collecting the data, and not that often, generating the
graphs. Then the httpd server is configured with a directory with the generated
static files.
http://www.brianlane.com/software/systemhealth/
svn path=/nixos/trunk/; revision=18866
* Add serverAddress option.
* Evaluate the client daemon in foreground, otherwise upstart get the hand
and tries to restart it.
svn path=/nixos/trunk/; revision=18799
the `sendmail' command (i.e. ssmtp). This is hacky - there should
be some global config value that specifies the path to sendmail,
which the ssmtp module and others can then set.
svn path=/nixos/trunk/; revision=18777
