Commit graph

2661 commits

Author SHA1 Message Date
Shea Levy 19127aa416 Add dd-agent module 2013-01-08 16:19:51 -05:00
Eelco Dolstra ac53b25f16 Remove handling of "debug2" and "S|s|single" kernel command line options
The "S|s|single" option is handled by systemd (starting
rescue.target).  And the rescue target basically removes the need for
a special debug shell.  (Also, there is "systemd.crash_shell=1" for
starting a shell if systemd crashes.)
2013-01-08 18:31:46 +01:00
Eelco Dolstra f4a3bdd6af Install {rescue,emergency}.{target,service}
Also, symlink kbrequest.target to rescue.target as suggested by the
systemd.special manpage.  This way, you can start a sulogin rescue
shell by pressing Alt+Up.
2013-01-08 18:24:06 +01:00
Eelco Dolstra 948dd8dd1a Use the upstream (but patched) sysinit.target 2013-01-08 17:26:51 +01:00
Eelco Dolstra 827e3dadc8 Don't special-case systemd-journald.service and systemd-user-sessions.service 2013-01-08 17:00:45 +01:00
Eelco Dolstra 884f58fa8a Include libsystemd-daemon.so.* in the initrd since dmsetup needs it
Strangely, this is only case after updating systemd to 197, I didn't
change lvm2...
2013-01-08 15:35:21 +01:00
Eelco Dolstra 81796c5baf Add a command ‘nixos-help’ that opens the NixOS manual in a browser 2013-01-08 02:13:33 +01:00
Eelco Dolstra 1541311f06 switch-to-configuration: Stop some target units to ensure proper dependency ordering
This is currently only done for network-interfaces.target, but
it should propably be done for most targets.
2013-01-07 16:06:45 +01:00
Eelco Dolstra 74bae63135 smartd: Remove unnecessary PartOf dependency 2013-01-07 16:01:22 +01:00
Eelco Dolstra da32722ade display-manager: Start after local-fs.target
We don't want users trying to log in while /home is still being
fsck'ed...
2013-01-07 16:00:10 +01:00
Eelco Dolstra 2e035ae042 Hack to prevent <interface>-cfg.service from breaking the default gateway
Restarting <interface>-cfg.service may cause the interface's IP
addresses to be flushed.  If the default gateway goes through that
interface, then the default gateway is deleted.  So we need to
restart network-setup.target.
2013-01-07 15:17:53 +01:00
Lluís Batlle i Rossell 38af598658 Simplifying defaultGatewayWindowSize according to Eelco suggestions 2013-01-06 23:20:48 +01:00
Lluís Batlle i Rossell 9a81748f20 Adding defaultGatewayWindowSize
This allows setting the max tcp window size for the route of
the default gateway (usually the internet access).

It works only for non-DHCP configurations by now.
2013-01-06 22:32:21 +01:00
Alexander Inyukhin 462a9f9fb0 Remove .conf extension from acpid config files
This should fix #51
2013-01-05 20:12:08 +00:00
Jan Malakhovski 4e64755b9d wacom: add USB tablet support
To be honest, it's more like "be less discriminating against USB tablets".
USB tablets usually get autodetected, device name is not necessary and defaulting to a serial touchscreen is a clear discrimination.
Unconditionally remapping buttons is generally not a good idea either.
Old defaults transformed into examples.
2013-01-05 19:38:23 +00:00
Eelco Dolstra 1aea92c4ce Ensure that ‘nix.gc.options’ is subject to shell expansion 2013-01-05 01:35:26 +01:00
Eelco Dolstra 96ba0ca283 For some units, use "systemctl restart" rather than "systemctl stop/start"
During a configuration switch, changed units are stopped in the old
configuration, then started in the new configuration (i.e. after
running the activation script and running "systemctl daemon-reload").
This ensures that services are stopped using the ExecStop/ExecStopPost
commands from the old configuration.

However, for some services it's undesirable to stop them; in
particular dhcpcd, which deconfigures its network interfaces when it
stops.  This is dangerous when doing remote upgrades - usually things
go right (especially because the switch script ignores SIGHUP), but
not always (see 9aa69885f0).  Likewise,
sshd should be kept running for as long as possible to prevent a
lock-out if the switch fails.

So the new option ‘stopIfChanged = false’ causes "systemctl restart"
to be used instead of "systemctl stop" followed by "systemctl start".
This is only proper for services that don't have stop commands.  (And
it might not handle dependencies properly in some cases, but I'm not
sure.)
2013-01-05 01:05:25 +01:00
Eelco Dolstra baac242a1f Run the garbage collector as a systemd service
Running it from systemd rather than cron has several advantages:
systemd ensures that only one instance runs at a time; the GC can be
manually started/stopped; and logging goes to the journal.

We still need cron to start the service at the right time, but
hopefully soon we can get rid of cron entirely (once systemd supports
starting a unit at a specific time).
2013-01-04 14:04:41 +01:00
Eelco Dolstra f701acfac0 nix-daemon: Start "nix-daemon" rather than "nix-worker --daemon" 2013-01-04 13:50:50 +01:00
Rob Vermaas 207d30b6f3 Fix VirtualBox image generation: switch-to-configuration in chroot needs /bin/sh 2013-01-04 10:58:56 +01:00
Eelco Dolstra 9aa69885f0 Don't do readlink() on every mount point when remounting /dev etc.
Doing so causes the activation script to hang if (say) an NFS mount
point is unreachable.
2013-01-02 18:28:44 +01:00
Mathijs Kwik 7e70cffc45 systemd mount units: better handling of mandatory options 2013-01-01 14:53:54 +01:00
Mathijs Kwik ebf4816717 systemd mount units: use 'escapeSystemdPath' from lib/utils 2013-01-01 14:53:54 +01:00
Mathijs Kwik a3ee9aac98 efi-boot-stub: enable hook for running (fixup) commands after efibootmgr run 2013-01-01 14:05:08 +01:00
Mathijs Kwik 16a9bcfe81 add support for systemd mount units
This is mainly useful for specifying mounts that depend on other
units. For example sshfs or davfs need network (and possibly
nameservices).

While systemd makes a distinction between local and remote
filesystems, this only works for in-kernel filesystems such as
nfs and cifs.

fuse-based filesystems (such as sshfs and davs) are classified as
local, so they fail without networking. By explicitly declaring these
mounts as full systemd units (as opposed to having systemd generate
them automatically from /etc/fstab), dependencies can be specified as
on every other unit.

In the future, we can probably port NixOS' filesystems handling to use
these native systemd.mount units and skip /etc/fstab altogether, but
this probably requires additional changes, such as starting systemd
even earlier during boot (stage 1).
2013-01-01 13:55:48 +01:00
Tim Dysinger 6961f5048d add vboxsf group (for automatic mounting of shared folders) 2012-12-31 11:00:02 -10:00
Rickard Nilsson 19e8ffc43f networkmanager: Use systemctl instead of initctl 2012-12-30 19:30:18 +01:00
Michael Raskin 9b7ce4a1b5 Merge pull request #50 from surr/fixes/tzdata
timezone should be taken from recent tzdata rather than glibc
2012-12-29 10:29:21 -08:00
viric af4db2a79c Merge pull request #57 from cpages/master
Add support for nvidia legacy 304 to xserver
2012-12-29 10:23:10 -08:00
Mathijs Kwik 183829cf99 gogoclient: change working dir before starting
otherwise state files are placed in /
2012-12-28 10:22:49 +01:00
Mathijs Kwik 244ed6ae71 nscd: use proper systemd.special(7) targets 2012-12-27 12:23:50 +01:00
Mathijs Kwik 3456f3b232 systemd: convert gogoclient job to service unit 2012-12-27 12:23:50 +01:00
Mathijs Kwik f61f0c139b systemd: convert smartd job to service 2012-12-27 12:23:50 +01:00
Mathijs Kwik dc58c2ea37 systemd: convert samba jobs to systemd services (samba.target) 2012-12-27 12:23:50 +01:00
Mathijs Kwik 90fa68cf32 systemd: convert mongodb job to service 2012-12-27 12:23:50 +01:00
Lluís Batlle i Rossell ceedc50009 Fixing the fuloong2f system tarball 2012-12-22 18:46:15 +01:00
Eelco Dolstra 45f0de21f0 nixos-rebuild: Fix the check for running nix-daemon 2012-12-21 00:18:12 +01:00
Eelco Dolstra fb8af2f9b6 postgresql: Don't wait for ages in post-start if the service has failed 2012-12-21 00:18:12 +01:00
Shea Levy 3ef1432866 Update create-s3-amis and amazon-image.nix to recent nixos 2012-12-18 13:44:47 -05:00
Eelco Dolstra ab18c03685 mysql55: Port to systemd
Not tested.  Seriously tempted to delete mysql55.  See issue #47.
2012-12-18 13:45:25 +01:00
Eelco Dolstra 75c67b0194 mysql: Port to systemd 2012-12-18 13:45:25 +01:00
Eelco Dolstra 251f8546c9 pam_ssh_agent_auth: Use /etc/ssh/authorized_keys.d 2012-12-17 21:14:09 +01:00
Shea Levy dd131a0c09 Revert "Setting the system utillinux to be utillinuxCurses."
This reverts commit cba4d20280.
2012-12-17 13:09:05 -05:00
Shea Levy 75ec5c609e Merge remote-tracking branch 'upstream/master' into systemd
Conflicts:
	maintainers/scripts/ec2/create-ebs-amis.py
2012-12-17 13:03:56 -05:00
Shea Levy 835ee30b32 Merge branch 'no-aufs' into systemd 2012-12-17 13:02:35 -05:00
Lluís Batlle i Rossell 358239348a making memtest grub entries work again
I'm not any good at perl, and I only came up with this after many
slow attempts. Any review welcome.

But until this, memtest was broken, and extraPrepareConfig as well, in grub.
2012-12-16 21:41:47 +01:00
Rob Vermaas 39a6143c66 Add options to control rate limiting behaviour of journald. See 'man journald.conf' for more information. 2012-12-16 20:28:45 +01:00
Shea Levy dfca6b97f1 Remove last mention of aufs for completeness 2012-12-16 13:33:23 -05:00
Shea Levy ae4c8e3e0b nova-image.nix: Replace the commented-out aufs mount with a commented-out unionfs-fuse mount 2012-12-16 13:31:44 -05:00
Shea Levy ac9002ce18 amazon-image: use unionfs-fuse instead of aufs 2012-12-16 13:16:17 -05:00
Shea Levy d19c223ba6 Simplify unionfs-chroot bind-mounting 2012-12-16 13:07:42 -05:00
Shea Levy e34024d998 Refactor common unionfs-fuse initrd prep into a separate module 2012-12-16 12:33:36 -05:00
Lluís Batlle i Rossell 3e734ba695 Qemu says 'boot=on' is deprecated, so I try a half-fix here
I change the 'build-vm' to use '-boot menu=on', so a menu displays and allows
choosing the 2nd hd. Otherwise, I don't know how to boot from a 2nd hd.
2012-12-16 18:07:13 +01:00
Shea Levy 3eb0faf317 qemu-vm: Use unionfs-fuse instead of aufs for writableStore 2012-12-16 11:56:49 -05:00
Shea Levy be4f69519b iso-image: Use unionfs-fuse instead of aufs 2012-12-16 11:31:52 -05:00
Lluís Batlle i Rossell dacd7d5a58 Setting iso_new_kernel to use linux 3.7.
It was using 3.2, the same kernel as the other isos.
2012-12-16 16:05:50 +01:00
Lluís Batlle i Rossell cba4d20280 Setting the system utillinux to be utillinuxCurses.
The live-dvd was set that way already.
I think some utillinux pieces may be nicer, or have more tools. I don't know
the details though.
2012-12-16 16:03:38 +01:00
Alexander Inyukhin 1ae44e42ed Use zoneinfo from tzdata
This fixes #50
2012-12-15 22:05:32 +04:00
Florian Friesdorf 14483c0bf9 update nixos channel path 2012-12-14 18:24:41 +01:00
Eelco Dolstra bd7ea9be58 sysinit.target: Drop the dependency on local-fs.target and swap.target
Having all services with DefaultDependencies=yes depend on
local-fs.target is annoying, because some of those services might be
necessary to mount local filesystems.  For instance, Charon's
send-keys feature requires sshd to be running in order to receive LUKS
encryption keys, which in turn requires dhcpcd, and so on.  So we drop
this dependency (and swap.target as well for consistency).  If
services require a specific mount, they should use RequiresMountsFor
in any case.
2012-12-14 17:42:54 +01:00
Eelco Dolstra 5437424297 Hackery to build against both the nixpkgs master and systemd branch 2012-12-13 15:04:09 +01:00
Carles Pagès e312df06f0 Add support for nvidia 304.xx drivers in xserver.
Those were already in nixpkgs, but not supported in xserver. Since some time
ago the current 310.xx dropped support for some not so new cards.
2012-12-13 11:36:18 +01:00
Rob Vermaas 859badc966 Zabbix agent: RemainAfterExit=true seems to give more reliable restarts, cannot completely figure out why, as Type=forking should be enough. 2012-12-11 20:54:19 +01:00
Eelco Dolstra 97ae408e83 Merge remote-tracking branch 'origin/master' into systemd 2012-12-11 17:40:39 +01:00
Eelco Dolstra 78bd54ca80 Allow setting additional AuthorizedKeysFiles
Charon needs this to include the dynamically generated
/root/.vbox-charon-client-key.  (We used
users.extraUsers.root.openssh.authorizedKeys.keyFiles for this, but
that no longer works.)
2012-12-11 17:29:34 +01:00
Eelco Dolstra eda051cff5 Remove abuse of "with" 2012-12-11 17:14:52 +01:00
Rickard Nilsson 68872f81cf openssh: Change the way authorized keys are added to the system.
Instead of the somewhat hacky script that inserted public keys
into the users' .ssh/authorized_keys files, use the AuthorizedKeysFile
configuration directive in sshd_config and generate extra key
files for each user (placed in /etc/authorized_keys.d/).
2012-12-11 17:02:39 +01:00
Eelco Dolstra 3224ea8a1e Don't require nixUnstable 2012-12-11 13:14:33 +01:00
Eelco Dolstra 745a201814 Check whether /proc/sys/net/ipv6/conf/all/disable_ipv6 exists 2012-12-11 13:14:17 +01:00
Eelco Dolstra 13617b803b Use the binary cache in the installer
Also remove "nixos-rebuild pull".
2012-12-08 19:00:06 +01:00
Eelco Dolstra ef3199f782 Add options for specifying binary caches
Cherry-picked a4bcb26b1a.
2012-12-08 18:37:40 +01:00
Jack Cummings bdee7f502c spl module params in boot.spl.* 2012-12-06 15:12:10 -08:00
Evgeny Egorochkin 860cbf7890 scanner support: create scanner group. Users need to be in this group to access scanners. 2012-12-06 02:59:34 +02:00
Evgeny Egorochkin 15a15be2f6 dhcpcd: disable "require dhcp_server_identifier" because of so many non-compliant DHCP servers 2012-12-05 23:55:42 +02:00
Jack Cummings b42d52eeb0 Add the hostid option. Refactor code a bit better for initrd(untested) and system operation. 2012-12-04 11:57:59 -08:00
Jack Cummings d2789791ee Need extraModulePackages for spl and zfs modules. 2012-12-04 11:28:05 -08:00
Jack Cummings a832ce7be1 Add zfs module. 2012-12-04 10:17:54 -08:00
Eelco Dolstra b1da38f564 Merge remote-tracking branch 'origin/master' into systemd 2012-11-30 16:12:04 +01:00
Eelco Dolstra 7435db4f89 Get rid of the last uses of mkAlways
mkAlways is an insane function, mkMerge is much saner.
2012-11-30 15:07:39 +01:00
Eelco Dolstra 3c6e0fd594 Generate the binary hardware database required by systemd 196 2012-11-29 18:51:44 +01:00
Eelco Dolstra 9eb81d2578 Renamed tcpWrapper -> tcp_wrappers 2012-11-29 15:16:30 +01:00
Lluís Batlle i Rossell 04963cf802 system-tarball-pc: fixing the readme inclusion 2012-11-29 11:29:15 +01:00
Lluís Batlle i Rossell a9e5d1ab50 Changing the kernel parameters for crashump
I think that these enable more checks, and make more NMIs happen.
2012-11-29 11:27:33 +01:00
Peter Simons 6b6b245693 sane: update name of the snapshot version of the backends 2012-11-26 16:21:11 +01:00
Peter Simons 403dc16c51 sane: update name of the snapshot version of the backends 2012-11-26 16:20:29 +01:00
Shea Levy a5ef0ffe12 rngd: Require /dev/random, only start when a hardware randomness source becomes available 2012-11-26 08:45:23 -05:00
Eelco Dolstra f3c9c83e04 Make it easier to append to the default sudo configuration 2012-11-23 15:14:16 +01:00
Shea Levy e76eb7f1a7 Disable rngd by default while I work on some patches to make it more systemd-friendly 2012-11-22 10:14:41 -05:00
Eelco Dolstra 994a15bc25 nixos-rebuild: Handle options with spaces in them
Like ‘--option binary-caches "http://foo http://bar"’
2012-11-22 12:04:00 +01:00
Eelco Dolstra a4bcb26b1a Add options for specifying binary caches 2012-11-22 11:49:47 +01:00
Eelco Dolstra 77891f8d59 Typo 2012-11-22 10:41:54 +01:00
Shea Levy cd513482d4 Add rngd service.
Inspired by http://pkgs.fedoraproject.org/cgit/rng-tools.git/tree/rngd.service?id=27b1912b2d9659b6934fd4c887e46c13958e7e3c
2012-11-22 02:07:25 -05:00
Rob Vermaas f0a6911929 Add ec2.metadata (default false) option whether to allow access to EC2 metadata API. 2012-11-21 12:19:38 -05:00
Peter Simons 0f15d75017 Merge pull request #29 from rickynils/shellaliases
Generate shell aliases programatically
2012-11-20 12:35:03 -08:00
Rickard Nilsson 6099451662 Add support for nslcd (nss-pam-ldapd) as users.ldap.daemon option 2012-11-20 16:39:45 +01:00
Rickard Nilsson 611ebeb1d0 Add nslcd (nss-pam-ldapd) uid and gid 2012-11-20 16:39:45 +01:00
Rickard Nilsson a22c362155 Add option for specifying shell aliases, environment.shellAliases. 2012-11-20 16:33:29 +01:00
James Cook 3afa5f86c1 Fixed the documentation for programs.ssh.forwardX11 to account for the X11 SECURITY extension. 2012-11-18 11:05:18 -08:00
James Cook 63dc873b85 Merge master. 2012-11-18 10:49:55 -08:00
Eelco Dolstra 60bf4c3cd7 Add a GRUB 1 dependency
http://hydra.nixos.org/build/3331139
2012-11-16 16:42:45 +01:00
Eelco Dolstra 722a3a7147 Remove unnecessary (AFAICT) call to toPath 2012-11-15 23:07:05 +01:00
Eelco Dolstra 35922e61d9 Systemd requires the latest Nix 2012-11-15 22:55:36 +01:00
Eelco Dolstra 1f401a0e35 Make install-grub.pl work when $PATH is empty 2012-11-15 22:54:43 +01:00
Eelco Dolstra f44d27a96c Make the installer work on systemd
Systemd mounts the root filesystem as a shared subtree, which breaks
recursive bind mounts.
2012-11-15 22:53:57 +01:00
Rickard Nilsson 02e0d7dbc3 dnsmasq: Add extraConfig option 2012-11-12 18:16:04 +01:00
Eelco Dolstra 08e6c0cb7c Update channel URLs 2012-11-12 09:19:25 +01:00
Eelco Dolstra 1350816199 test-instrumentation.nix: Don't start agetty on hvc0 2012-11-12 09:19:25 +01:00
Peter Simons 622a652411 Add option "environment.binsh" to configure the shell executable used to create the global /bin/sh symlink. 2012-11-11 21:46:25 +01:00
Peter Simons 04ba5de70a modules/programs/bash/bash.nix: cosmetic indention fix 2012-11-11 21:29:33 +01:00
Shea Levy 2f833bc88d Remove unnecessary toPath that breaks with recent nixUnstable 2012-11-08 13:04:20 -05:00
Eelco Dolstra e078117c72 firewall.nix: Don't fail if IPv6 is disabled 2012-11-06 22:55:25 +01:00
aszlig a333f7212e systemd: Fail if kernel features are missing.
This has rendered my system unbootable, because I forgot to enable AUTOFS4 in my
custom kernel. In addition to AUTOFS4, this includes (hopefully) all other
kernel features needed by systemd, as listed in the README:

REQUIREMENTS:
  Linux kernel >= 2.6.39
    with devtmpfs
    with cgroups (but it's OK to disable all controllers)
    optional but strongly recommended: autofs4, ipv6

Autofs4 is not a requirement here, but in our case it turns out that the system
is not able to boot properly with a LUKS-enabled system (or at least not on _my_
system).

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-11-06 11:25:43 +01:00
Peter Simons 70e6e19f54 xsession: source /etc/profile at the beginning of the script
The xsession script runs services that depend on a sane environment. Gpg-agent, for
example, runs the program "pinentry-gtk-2" to obtain the password to unlock GnuPG
and SSH keys. That program will display only gibberish unless $FONTCONFIG_FILE is
configured properly. Instead of configuring these variables explicitly one by one,
we just source /etc/profile, which contains the appropriate @shellInit@ code.
2012-11-05 23:07:53 +01:00
aszlig 1c28b86749
pam: Douchebag commit, fix alphabetical order.
Yes, I'm going to get back to school and learn the alphabet. I promise!

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-11-05 09:41:24 +01:00
aszlig 6e6ee3278c
pam: Add default configuration for GNU screen.
This is needed in order to properly lock your screen using the C-a C-x
(lockscreen) command _and_ being back to re-login, because the "other" PAM
service/fallback is to deny authentication.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-11-05 09:40:15 +01:00
Lluís Batlle i Rossell 64540fb453 Adding quick instructions in system-tarball-pc to use it as chroot.
I also split the readme into a file apart.
2012-11-04 22:13:19 +01:00
Eelco Dolstra 458f36f5f1 Turn fileSystems into an attribute set
So now you can write

  fileSystems =
    [ { mountPoint = "/";
        device = "/dev/sda1";
      }
    ];

as

  fileSystems."/".device = "/dev/sda1";
2012-11-02 18:02:12 +01:00
Eelco Dolstra 97f087cd44 Turn networking.interfaces into an attribute set
Thus

  networking.interfaces = [ { name = "eth0"; ipAddress = "192.168.15.1"; } ];

can now be written as

  networking.interfaces.eth0.ipAddress = "192.168.15.1";

The old notation still works though.
2012-11-02 17:08:11 +01:00
Eelco Dolstra 93f82dfeef Remove outdated comment about EC2 booting into stage-2 directly 2012-11-02 17:07:53 +01:00
Eelco Dolstra 67de234e1c wpa_supplicant.nix: Slightly improve descriptions 2012-11-02 17:05:30 +01:00
Eelco Dolstra 6ae0b3beed dhcpcd: Don't use --background so that fetch-ec2-data can be ordered after it 2012-11-02 14:20:05 +01:00
Eelco Dolstra af4e176c12 Fix description 2012-11-02 14:10:06 +01:00
Eelco Dolstra 48a0ea0513 Make Apache wait for ‘charon send-keys’
(This is a no-op on non-Charon deployments since the ‘keys.target’
unit won't have any dependencies.)
2012-11-01 23:32:12 +01:00
Eelco Dolstra dd7edefb2c Order mkfs services before the corresponding fsck services 2012-10-31 14:49:09 +01:00
Eelco Dolstra 1860badbeb dhcpcd: Go into the background immediately 2012-10-31 14:24:51 +01:00
Eelco Dolstra f293455474 dhcpcd: Don't duplicate log messages
Dhcpcd writes log messages to both syslog and stderr.  So ignore
stderr.
2012-10-31 14:24:22 +01:00
Eelco Dolstra 1da362b34b Fix coverage data collection
http://hydra.nixos.org/build/3253046
2012-10-30 17:27:14 +01:00
Eelco Dolstra bcdc71ddae Kill the backdoor more forcefully
Otherwise it hangs until the 90 second timeout expires.

http://hydra.nixos.org/build/3253068
2012-10-30 16:42:05 +01:00
Rob Vermaas 8caceffae8 Logstash: fix typo, should have tested. 2012-10-30 14:22:14 +01:00
Rob Vermaas 631fce3c6f Logstash: pass TZ, redirect log output to prevent recursion when using syslogd. 2012-10-30 14:18:51 +01:00
Rob Vermaas 2b19856f40 Logstash: do not always log to stdout 2012-10-30 14:09:30 +01:00
Eelco Dolstra 4143ff2280 In headless deployments, don't start agetty on the console 2012-10-30 13:53:36 +01:00
Rob Vermaas 88a9d7a9ca Added environment.promptInit to allow PS1 overriding. Would be nicer to be able to allow overriding via shellInit, however could not get that to work. For now this is a temporary solution which will not break anything. 2012-10-30 13:33:37 +01:00
Eelco Dolstra 1a82024dd8 In the tests, don't start agetty on /dev/ttyS0
Running agetty on ttyS0 interferes with the backdoor, which uses ttyS0
as its standard error.  After agetty starts, writes to the stderr file
descriptor will return EIO (though doing "exec 2>/proc/self/fd/2" will
miracuously fix this).

http://hydra.nixos.org/build/3252782
2012-10-29 21:10:00 +01:00
Eelco Dolstra 4764848314 Remove some obsolete options 2012-10-29 21:10:00 +01:00
Peter Simons b1fefb8834 modules/programs/ssh.nix: strip trailing whitespace 2012-10-29 17:10:46 +01:00
Peter Simons 307644e3b0 modules/programs/ssh.nix: simplify expression that generates 'ForwardX11' entry 2012-10-29 17:10:37 +01:00
Peter Simons 9c74f9a51b modules/programs/ssh.nix: configure AddressFamily properly
Explicitly restrict ssh clients to use of IPv4 addresses if IPv6 support is not enabled.
2012-10-29 17:10:17 +01:00
Peter Simons cd372c62ea modules/services/networking/ssh/sshd.nix: configure AddressFamily properly
Explicitly restrict sshd to use of IPv4 addresses if IPv6 support is not enabled.
2012-10-29 12:46:30 +01:00
Eelco Dolstra ae861c8e33 Undo accidental commit 2012-10-29 12:44:38 +01:00
Eelco Dolstra 390f5f7376 Remove the cgroups module
Cgroups are handled by systemd now.  Systemd's cgroup support does not
do all the things that cgrulesengd does, but they're likely to
interact poorly with each other.
2012-10-26 19:36:59 +02:00
Eelco Dolstra 65eae4dd34 Update libvirt for systemd 2012-10-26 16:22:19 +02:00
Eelco Dolstra 23390147ea upstart.nix: Treat "daemon" as "forking" 2012-10-26 16:22:19 +02:00
Eelco Dolstra 6705358ede Convert Zabbix agent/server to systemd
Note all the crap systemd doesn't need :-)
2012-10-26 16:22:19 +02:00
Eelco Dolstra b3c5d42b1d Don't create /var/log/upstart 2012-10-26 16:22:18 +02:00
Lluís Batlle i Rossell 82d39c9ca4 Fixing stage1 about getting a shell with job control in case of error
It's a busybox faq:
http://www.busybox.net/FAQ.html#job_control
2012-10-24 21:49:10 +02:00
Lluís Batlle i Rossell c76fc27aff dnsmasq: Setting fixed order in DNS name resolution.
That fits better my setup; if anyone doesn't need this, we can write an option
for the fixed order queries.
2012-10-24 19:29:39 +02:00
Peter Simons b43e219aeb modules/services/networking/ssh/sshd.nix: configure AddressFamily properly
Explicitly restrict sshd to use of IPv4 addresses if IPv6 support is not enabled.
2012-10-24 19:01:38 +02:00
Eelco Dolstra b6f9e05269 Update NFS client/server modules for systemd 2012-10-24 18:10:58 +02:00
Eelco Dolstra 2d9258da67 auto.nix: Use SLiM to implement auto-logins 2012-10-24 12:31:02 +02:00
Vladimír Čunát a392468245 Merge pull request #39 from MarcWeber/fixes/ati-proprietary
making ati proprietary drivers work again
2012-10-24 02:59:38 -07:00
Eelco Dolstra 224c825a36 Add option ‘users.motd’ for setting a message of the day shown on login
Note that this uses pam_motd.
2012-10-23 09:10:48 -04:00
Eelco Dolstra c980faebe2 upstart.nix: Set ‘Type’ to ‘oneshot’ for Upstart tasks
This way the service will only reach the "started" state when the task
has finished.
2012-10-23 08:30:50 -04:00
Eelco Dolstra e5fa3f108e Set uniqueness constraint on boot.devShmSize etc. 2012-10-23 07:50:23 -04:00
Eelco Dolstra 7efde0740e Add user option ‘isAlias’ to allow one user account to alias another 2012-10-23 13:35:06 +02:00
Jack Cummings 1cbad692c3 Add an option to add 'option=single-request' to /etc/resolv.conf. 2012-10-21 21:49:21 -07:00
Eelco Dolstra c8628e0293 Don't let interfaces get IPv6 addresses if networking.enableIPv6 is false 2012-10-19 15:41:01 -04:00
Eelco Dolstra ac8db6fd33 firewall.nix: Don't fail if IPv6 is disabled 2012-10-19 15:21:06 -04:00
Eelco Dolstra 06cbe62537 switch-to-configuration: Support services activated by multiple sockets 2012-10-18 13:26:47 -04:00
Eelco Dolstra b4a1893cdd systemd-vconsole-setup: Don't put the X server in non-raw mode
‘systemd-vconsole-setup’ by default operates on /dev/tty0, the
currently active tty.  Since it puts /dev/tty0 in Unicode or ASCII
mode, if the X server is currently active when it runs, keys such as
Alt-F4 won't reach the X server anymore.  So use /dev/tty1 instead.
2012-10-18 11:58:37 -04:00
Eelco Dolstra a4cad32c3d Generate more user-friendly script filenames
This is primarily important in journal entries.
2012-10-18 11:58:37 -04:00
Peter Simons 7d58132c0a Merge pull request #36 from jcumming/hostapd
hostapd module
2012-10-18 03:21:31 -07:00
aszlig f9831a94c9
apache-httpd: Simplify all versionOlder calls.
We now just have a simple attribute called "version24" which replaces all those
pesky versionOlder that were spreading throughout the file and makes things way
more readable.

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-10-17 17:47:30 +02:00
aszlig 919e6e55a9
apache-httpd: Create runtime dir for version 2.4.
By default the path is determined related to ServerRoot. Unfortunately
ServerRoot is pointing to the Nix store and the web server can't write to it.

We now create a directory called "runtime" withen the stateDir and point
DefaultRuntimeDir to it.

For more information on the DefaultRuntimeDir directive, please see:

http://httpd.apache.org/docs/2.4/mod/core.html#defaultruntimedir

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-10-17 17:38:43 +02:00
aszlig 5655ec0efa
apache-httpd: Avoid NameVirtualHost in >= v2.4.
NameVirtualHost no longer has any effect on version 2.4 and just emits ugly
warnings, so let's not use it if we use 2.4.

More information: http://httpd.apache.org/docs/2.4/upgrading.html#misc

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-10-17 17:03:50 +02:00
aszlig a88453fbaa
apache-httpd: Properly wrap access directives.
The Order/Deny directives are deprecated in version 2.4, so we're going to
define two wrappers for allDenied and allGranted in order to properly generate
configurations for both version 2.2 and 2.4.

For more information an access control changes, see:

http://httpd.apache.org/docs/2.4/upgrading.html#access

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-10-17 16:57:18 +02:00
aszlig 3acd98b040
apache-httpd: Add unixd for 2.4, needed by "User".
Beginning with 2.4 mod_unixd is needed to supply Unix usernames and groups for
the web server. For details please have a look at:

http://httpd.apache.org/docs/2.4/upgrading.html#commonproblems

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-10-17 15:34:08 +02:00
aszlig 3ad8fac5a2
apache-httpd: Dynamically load MPM module in v2.4.
Now, MPMs can be loaded at runtime and it's no longer required to compile in one
of the MPM modules statically. So, if version is >= 2.4, load the MPM module
corresponding to the multiProcessingModule value of the service module.

For details, please see: http://httpd.apache.org/docs/2.4/mpm.html

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-10-17 15:17:48 +02:00
aszlig 18076e001a
apache-httpd: Use authn_core for version >= 2.3.
Beginning with version 2.3, the authn were refactored. As a result, authn_alias
is now part of the new module authn_core, so let's use authn_core instead of
authn_alias.

For details please see: http://httpd.apache.org/docs/2.4/upgrading.html#misc

Signed-off-by: aszlig <aszlig@redmoonstudios.org>
2012-10-17 15:11:53 +02:00
Peter Simons 56f90da276 modules/programs/bash: '/run/current-system/sw' is already a part of $NIX_PROFILES 2012-10-16 19:08:10 +02:00
Peter Simons 6a9b855412 modules/programs/bash: '/run/current-system/sw' is already a part of $NIX_PROFILES 2012-10-16 19:07:19 +02:00
Peter Simons 04a8642b4b modules/programs/bash: clean-up variables used in initialization of bash-completion 2012-10-16 18:41:45 +02:00
Peter Simons efc104c4c8 modules/programs/bash: improve bash completion support
The new configuration.nix option 'environment.enableBashCompletion'
determines whether bash completion is automatically enabled system-wide
for all interactive shells or not. The default setting is 'off'.
2012-10-16 18:41:45 +02:00
Peter Simons c7fb0defe6 modules/programs/bash: clean-up variables used in initialization of bash-completion 2012-10-16 18:41:20 +02:00
Peter Simons 4ca0617f4a modules/programs/bash: improve bash completion support
The new configuration.nix option 'environment.enableBashCompletion'
determines whether bash completion is automatically enabled system-wide
for all interactive shells or not. The default setting is 'off'.
2012-10-16 18:23:28 +02:00
Eelco Dolstra 8499d7555f Backward compatibility hack for ‘networking.nat.internalIPs’ 2012-10-16 11:28:30 -04:00
Eelco Dolstra 10ac80115b switch-to-configuration: Fix bad Perl 2012-10-14 21:12:11 -04:00
Mathijs Kwik 97a3a99b40 firewall: options to select connection-tracking helpers
My main reason for adding this is the ability to turn off helpers
altogether. If you are not using any of the special protocols, keeping
them turned off is safest, and in case you do want to use them, it's
best to configure them through the new CT target for your network
topology. Perhaps some sane defaults for nixos can be examined in the
future.

This change has no impact if you don't touch the added options, so no
need to adapt.
2012-10-13 09:59:31 +02:00
Mathijs Kwik 6c62de6a31 firewall: option to enable the rpfilter netfilter module
This is meant to replace /proc/sys/net/ipv4/conf/*/rp_filter, which
only works for ipv4. Furthermore, it's nicer to handle this kind of
filtering in the firewall.

There are some more subtle differences, please see:
https://home.regit.org/netfilter-en/secure-use-of-helpers/

I chose to enable this by default (when the firewall is enabled) as
it's a good idea in general. Only people with advanced routing needs
might not want this, but I guess they don't use the nixos firewall
anyway and use a custom solution. Furthermore, the option only becomes
available in kernel 3.3+, so conservative nixos users that just stick
to the default kernel will not need to act now just yet.
2012-10-13 09:59:31 +02:00
Eelco Dolstra 53f216885f Ignore systemd-modules-load errors
On NixOS, ‘boot.kernelModules’ has historically contained modules that
may not exist or load everywhere, so don't barf on those.
2012-10-12 17:39:06 -04:00
Eelco Dolstra 161c837c49 Port automatic filesystem creation to systemd 2012-10-12 17:32:36 -04:00
Eelco Dolstra 12d1cd87ce Systemd unit names can contain Nix-illegal characters, so don't include them 2012-10-12 17:32:05 -04:00
Eelco Dolstra 3f6d53cc97 Move escapeSystemdPath to lib/utils.nix
The new file ‘utils.nix’ is intended for NixOS-specific library
functions (i.e. stuff that shouldn't go into Nixpkgs' lib/).
2012-10-12 17:01:49 -04:00
Eelco Dolstra e8de4455ab Update automatic swapfile creation for systemd 2012-10-12 16:47:29 -04:00
Eelco Dolstra 97a2de983b Ensure that swap.target is pulled in by switch-to-configuration even if it failed earlier 2012-10-12 16:38:00 -04:00
Eelco Dolstra fd7dbc99ab switch-to-configuration: Handle multiple swap devices properly 2012-10-12 16:37:14 -04:00
Eelco Dolstra b968244aa1 Move fs.target to filesystems.nix 2012-10-12 15:08:44 -04:00
Peter Simons 7ce9893bef network-interfaces.nix: interfaces that are part of a bridge must be brought 'up' for the bridge to function 2012-10-12 18:14:39 +02:00
Eelco Dolstra e3c1865067 Let the tun services depend on /dev/net/tun 2012-10-11 17:59:41 -04:00
Eelco Dolstra d63da5892c Ensure that systemd-modules-load is restarted when boot.kernelModules changes 2012-10-11 17:58:46 -04:00
Eelco Dolstra 71a541afb6 dhcpcd: Don't depend on network-interfaces.target
Dhcpcd automatically detects new interfaces, so we can start it right
away.
2012-10-11 17:57:54 -04:00
Eelco Dolstra b606165bd9 Allow a unit to declare "triggers" that force a restart
The triggers are just arbitrary strings that are included in the unit
under X-Restart-Triggers.  The idea is that if they change between
reconfigurations, switch-to-configuration will restart the unit
because its store path changed.  This is mostly useful for services
that implicitly depend on generated files in /etc.  Thus you can say

  restartTriggers = [ confFile ];

where ‘confFile’ is the derivation that generated the /etc file in
question.
2012-10-11 17:54:43 -04:00
Eelco Dolstra 285f587025 Move non-interface specific initialisation to ‘network-setup.service’
The unit ‘network-interface.service’ has been replaced by
‘network-interfaces.target’.
2012-10-11 16:18:48 -04:00
Eelco Dolstra 2cf9bb929b Add a ‘restart’ alias 2012-10-11 16:18:34 -04:00
Eelco Dolstra 1c53b2e299 Don't flush addresses unless necessary
Flushing is bad if the Nix store is on a remote filesystem accessed
over that interface.

http://hydra.nixos.org/build/3184162

Also added a interface option ‘prefixLength’ as a better alternative
to ‘subnetMask’.
2012-10-11 15:36:52 -04:00
Eelco Dolstra 4104f60800 Fix accidental commit 2012-10-11 12:43:08 -04:00
Eelco Dolstra bd1071d02b Remove "wants" dependencies on <interface>.service
Instead it's enough to depend on
sys-subsystem-net-devices-<interface>.device, which in turn has a
"wants" dependency on the service (if any) that creates the interface.
2012-10-10 22:47:50 -04:00
Eelco Dolstra d7458b5fc2 Split the monolithic network-interface service into multiple units
For each statically configured interface, we now create a unit
‘<interface>-cfg.service’ which gets started as soon as the network
device comes up.  Similarly, each bridge defined in
‘networking.bridges’ and virtual interface in ‘networking.interfaces’
is created by a service ‘<interface>.service’.

So if we have

  networking.bridges.br0.interfaces = [ "eth0" "eth1" ];
  networking.interfaces =
    [ { name = "br0";
        ipAddress = "192.168.1.1";
      }
    ];

then there will be a unit ‘br0.service’ that depends on
‘sys-subsystem-net-devices-eth0.device’ and
‘sys-subsystem-net-devices-eth1.device’, and a unit ‘br0-cfg.service’
that depends on ‘sys-subsystem-net-devices-br0.device’.
2012-10-10 17:55:42 -04:00
Eelco Dolstra 62b707de07 Add support for postStop scripts 2012-10-10 17:55:13 -04:00
Eelco Dolstra e9b221c2ff firewall.nix: Don't spam the log 2012-10-10 16:51:05 -04:00
Eelco Dolstra 17a7f48364 Add an option for BindsTo dependencies 2012-10-10 16:50:41 -04:00
Eelco Dolstra 6b185a131f Use config.system.build.systemd in the toplevel derivation 2012-10-10 16:49:59 -04:00
Eelco Dolstra ad94b9e50e Use optionalAttrs 2012-10-10 16:49:47 -04:00
James Cook 5181ca4a3f Change the default value of programs.ssh.forwardX11 to false.
Forwarding X11 to untrusted servers is extremely insecure; see for example
http://www.hackinglinuxexposed.com/articles/20040705.html
2012-10-09 23:21:45 -07:00
Jack Cummings 71e6eca567 - fix indention, clarify parameter descriptions, and use 'exec' instead of 'script' in the hostapd job 2012-10-09 12:19:09 -07:00
Eelco Dolstra 6902452901 Whitespace 2012-10-09 15:14:32 -04:00
Eelco Dolstra d71c0bb834 Respect partOf etc. for socket and target units 2012-10-09 15:14:15 -04:00
Jack Cummings e40146de16 nat: enable NAT for multiple networks 2012-10-09 14:00:59 -04:00
Jack Cummings e8d8b6b399 smartd: Add options for each device being monitored 2012-10-09 14:00:59 -04:00
Mathijs Kwik 01b8c48c32 logcheck: add some options to ease setting up ignore-rules
The special handling for cronjobs should probably move to the cron
module (logcheckIgnore = bool option) in the future, as it's more
natural to just declare a cronjob, and mark it as "log-ignored",
instead of adding cronjobs through logcheck.

But as systemCronjobs is not an attrset yet (just simple strings),
this would require adding an attrset for cronjobs or parsing strings
in the nix language to get hold of the cron-user and command.

So for now, I keep the interface within logcheck's module.
2012-10-09 16:04:17 +02:00
Eelco Dolstra dd3fe9d792 Merge remote-tracking branch 'origin/master' into systemd
Conflicts:
	modules/services/system/nscd.nix
2012-10-08 13:47:37 -04:00
Eelco Dolstra f451afea8f Remove ‘services.journald.logKernelMessages’
This option no longer exists in systemd.
2012-10-08 10:51:17 -04:00
Marc Weber 87bb6b1c6d making ati proprietary drivers work again
However SLIM is still broken and you have to create a
/usr/lib/dri/fglrx_dri.so symlink pointing to
/run/opengl-driver/lib/fglrx_dri.so

At least fgl_glxgears shows 10 times more frames per second now
2012-10-07 17:24:42 +02:00
Eelco Dolstra 2b2f0067b8 Add an /etc/hosts entry mapping localhost to ::1 2012-10-07 00:46:24 -04:00
Eelco Dolstra 570e523a88 Remove 127.0.0.1 mapping for the system's hostname
Also remove the <hostname>.<domain> mapping.
2012-10-07 00:40:00 -04:00
Eelco Dolstra 74295866f5 Don't include NSS modules in $LD_LIBRARY_PATH
This is broken because it requires restarting applications to see new
NSS modules.  The proper way to handle NSS modules is through nscd.
See commit 554ae9908b.
2012-10-07 00:37:36 -04:00
Eelco Dolstra 13841d6e47 Use nss-myhostname to ensure that the hostname resolves to something sensible 2012-10-06 21:00:26 -04:00
Eelco Dolstra 757ab7f6d3 Generate nsswitch.conf properly 2012-10-06 20:58:46 -04:00
Jack Cummings 33754edb3e - add a hostapd module 2012-10-05 21:39:56 -07:00
Eelco Dolstra dd1770bf0b Enable klogd on Linux < 3.5
On Linux >= 3.5, systemd takes care of logging kernel messages.
2012-10-05 13:44:15 -04:00
Eelco Dolstra a5969634f4 sshd: Do detach into the background
This is necessary to ensure that jobs that need to start after sshd
work properly.

This reverts 03f13a4939.
2012-10-04 23:38:27 -04:00
Eelco Dolstra 98c6c5b730 fetch-ec2-data: Update for systemd 2012-10-04 23:26:19 -04:00
Eelco Dolstra 892b3f6ad6 acpid: Skip (rather than fail) if /proc/acpi doesn't exist
E.g. EC2 instances don't have ACPI.
2012-10-04 23:26:01 -04:00
Eelco Dolstra 0ddd147cfc headless.nix: Mountall is gone 2012-10-04 23:25:33 -04:00
Eelco Dolstra 5d9b3ed12b scsi-link-pm: Don't fail if there are no matching SCSI hosts 2012-10-04 23:25:11 -04:00
Eelco Dolstra 8f4d8cf620 Enable the power management module by default
After all, we don't want NixOS machines to contribute to global
warming more than necessary!
2012-10-04 22:10:35 -04:00
Eelco Dolstra 9b431cb24e upower: Work around the daemon getting stuck after a suspend 2012-10-04 21:58:40 -04:00
Eelco Dolstra 7d26dde69a Oops, systemd-inhibit should be exec'ed 2012-10-04 21:58:20 -04:00
Eelco Dolstra 52483c36bb Lowercase debug output 2012-10-04 21:44:45 -04:00
Eelco Dolstra db2a4d144e xsession: Set a inhibitor to prevent systemd from handling the power button and lid 2012-10-04 21:44:24 -04:00
Eelco Dolstra c6d12257f1 systemd: Run the powerManagement.* hooks on suspend/resume
Also, drop pm-utils. Systemd now takes care of suspend/resume.
2012-10-04 17:57:10 -04:00
Eelco Dolstra 38229da940 upower: Add glib to $PATH
The upower daemon needs the gdbus command (which is weird given that
upower links against dbus_glib, but ah well...).  This fixes suspend
in KDE with systemd.
2012-10-04 16:38:31 -04:00
Eelco Dolstra fdea3ac3d2 stage-2-init: Don't rely on groups being initialised 2012-10-04 16:15:30 -04:00
Eelco Dolstra 6c6134c2d2 Fix the manual service on the installation CD 2012-10-04 16:15:10 -04:00
Eelco Dolstra 74be2d9707 ISO image: Fix graphical GRUB menu 2012-10-04 16:14:44 -04:00
Eelco Dolstra 8dc4f2c3be Fix the rogue service for systemd 2012-10-04 15:27:31 -04:00
Eelco Dolstra 02624758b1 Use udev to restore ALSA volume settings
Alsa-utils provides a udev rule to restore volume settings, so use
that instead of restoring them from a systemd service.  The
"alsa-store" service saves the settings on shutdown.
2012-10-02 11:09:54 -04:00
Eelco Dolstra 666620cdd5 Use ‘mountpoint -q’ 2012-10-02 10:32:56 -04:00
Eelco Dolstra 2044ae785d Use "wants" instead of "requires" 2012-10-02 10:32:29 -04:00
Eelco Dolstra 7932978617 Fix Upstart compatibility jobs that depend on "stopped udevtrigger"
It's not enough to say "after udev-settle.service" since
udev-settle.service is not wanted/required anywhere - we need to say
"wants udev-settle.service" as well.

This should fix problems with ALSA and X11 initialisation that people
have been seeing.
2012-10-02 10:31:02 -04:00
Eelco Dolstra 2cf5e3cb66 Add options ‘boot.systemd.targets’ and ‘boot.systemd.sockets’ 2012-10-01 18:58:11 -04:00
Eelco Dolstra ca13a913d9 Oops, lost some code 2012-10-01 18:20:22 -04:00
Eelco Dolstra 990ec8cc4e Decrease PostgreSQL start check interval 2012-10-01 17:32:03 -04:00
Eelco Dolstra 2326c6da2b postgresql.nix: Depend on the filesystem containing the database 2012-10-01 16:53:13 -04:00
Eelco Dolstra 5cf702e1c1 postgresql.nix: Use User/Group instead of su 2012-10-01 16:49:02 -04:00
Eelco Dolstra 13d747c11a Support postStart scripts in service units 2012-10-01 16:45:49 -04:00
Eelco Dolstra 891be375b5 Make unitConfig/serviceConfig attribute sets
So instead of:

  boot.systemd.services."foo".serviceConfig =
    ''
      StartLimitInterval=10
      CPUShare=500
    '';

you can say:

  boot.systemd.services."foo".serviceConfig.StartLimitInterval = 10;
  boot.systemd.services."foo".serviceConfig.CPUShare = 500;

This way all unit options are available and users can set/override
options in configuration.nix.
2012-10-01 16:27:42 -04:00
Eelco Dolstra 440b793a5b Remove ‘autocreate’ FS option
Systemd creates missing mountpoints unconditionally.
2012-10-01 14:34:39 -04:00
Eelco Dolstra 353522ef79 Remove JoinControllers line because upstream reverted joining cpuset 2012-10-01 14:33:01 -04:00
Peter Simons 4b78161e3e dovecot: add options to selectively enable/disable the IMAP and/or POP3 listener 2012-09-30 00:54:03 +02:00