reiserfs now have separate modules that are conditional on
boot.supportedFilesystems and boot.initrd.supportedFilesystems.
By default, these include the filesystems specified in the fsType
attribute in fileSystems. Ext2/3/4 support is currently
unconditional.
Also unbreak the installer test (http://hydra.nixos.org/build/2272302).
svn path=/nixos/trunk/; revision=32954
many services depend on other services that bring up network interfaces.
Examples are ipv6 tunneling clients or VPNs.
As there are multiple choices for these network-interface-providing services,
it's not nice to hardcore these deps in every service.
This change sets up a generic config option for this purpose.
providers (gw6c/gogoclient/openvpn) can plug into this to signal they bring up
an important interface.
Daemons that need these interfaces, can then depend on the 'all-interfaces' event,
instead of the individual services.
By default, the event fires when network-interfaces completes.
svn path=/nixos/trunk/; revision=32764
As reported by Bryce L Nordgren.
Multi-disk btrfs filesystems need to get assembled first before they become mountable.
Enable this by explicitly assigning fsType = "btrfs" in the filesystems list in configuration.nix
svn path=/nixos/trunk/; revision=32682
default. See
http://www.codon.org.uk/~mjg59/power/good_practices.html
for the reasoning. (Basically, the ‘performance’ and ‘powersave’
governors don't actually provide extra performance or power savings
in most cases.)
It used to be that desktop environments like KDE were able to set
the governor through HAL (e.g. KDE could be configured to switch to
the powersave governor when the user unplugs his laptop). However,
this is no longer the case with upower — it is now expected that
everybody uses the ondemand governor. See
http://old.nabble.com/-PATCH--powerdevil-remove-cpufreq.patch-td27815354.html
* Rename ‘cpuFreqGovernor’ to ‘powerManagement.cpuFreqGovernor’.
* Include cpufreq-utils in the system path if a governor is set, since
we depend on it anyway.
svn path=/nixos/trunk/; revision=30991
cause the filesystems to be reordered. During stage 1, the ordering of
filesystems is sensitive. (In stage 2, mountall ensures that filesystems
are mounted in the right order.)
svn path=/nixos/trunk/; revision=30046
This way users won't need to add ttyBackgrounds.enable = false when upgrading to a new kernel, and if the kernel gets splashutils in the future ttyBackgrounds will be enabled automatically.
svn path=/nixos/trunk/; revision=27911
since the latter is rather deprecated and has been unmaintained
since 2001. Note that "ip" doesn't know about classful addressing,
so you can no longer get away with not specifying the subnet mask
for explicitly configured interfaces. So if you had
networking.interfaces =
[ { name = "eth0"; ipAddress = "192.168.1.1"; } ];
this should be changed to
networking.interfaces =
[ { name = "eth0";
ipAddress = "192.168.1.1";
subnetMask = "255.255.255.0";
}
];
otherwise you end up with a subnet mask of 255.255.255.255.
svn path=/nixos/trunk/; revision=26279
* Moved some scriptlets to the appropriate modules.
* Put the scriptlet that sets the default path at the start, since it
never makes sense not to have it there. It no longer needs to be
declared as a dependency.
* If a scriptlet has no dependencies, it can be denoted as a plain
string (i.e., `noDepEntry' is not needed anymore).
svn path=/nixos/trunk/; revision=23762
the ‘nfs-kernel-statd’ task.
* Work around an apparent bug in Upstart: the ‘mountall’ task cannot
be restarted because of the ‘starting mountall’ condition in the
statd task. So instead make ‘mountall’ depend on ‘started
nfs-kernel-statd’.
svn path=/nixos/trunk/; revision=22508
a daemon (it just starts some kernel threads). In the post-stop
script, stop the kernel threads.
* exportfs: fix the createMountPoints option.
* Mount the nfsd filesystem on /proc/fs/nfsd because mountd prefers
this.
svn path=/nixos/branches/boot-order/; revision=22187
during boot. Mountall ensures that these are done in the right
order. It's informed by udev about devices becoming available. It
emits some Upstart events upon reaching certain states, in
particular ‘local-filesystems’ after all local filesystems have been
mounted successfully, ‘remote-filesystems’ after all network
filesystems have been mounted, and ‘filesystem’ (sic) when all
filesystems have been mounted.
Currently, if a filesystem fails to mount or doesn't exist, then the
mingettys won't start and the boot will appear to hang. This is
because mountall doesn't emit an event for failing filesystems and
waits indefinitely for the filesystems to become available.
* The ‘filesystems’ and ‘swap’ Upstart jobs are gone. (Support for
encrypted swap devices is temporarily gone.)
* Generate a proper /etc/fstab from the ‘fileSystems’ and
‘swapDevices’ options.
svn path=/nixos/branches/boot-order/; revision=22148
`su'.
* The `usermod' from `shadow' allows setting a supplementary group
equal to the user's primary group, so the special hack for the
`nixbld' group is no longer needed.
* Removed /etc/default/passwd since it's not used by the new passwd.
The hash is configured in pam_unix.
* Move some values for `security.setuidPrograms' and
`security.pam.services' to the appropriate modules.
svn path=/nixos/trunk/; revision=22107
interface name through the derived option networking.ifaces. This
makes it easier to get information about specific interfaces
(e.g. `nodes.router.config.networking.ifaces.eth2.ipAddress').
Really networking.interfaces should be an attribute set.
svn path=/nixos/trunk/; revision=21938
client# /dev/fd/9: line 13: -q: command not found
client# /dev/fd/9: line 18: test: -neq: binary operator expected
client# mdadm: No arrays found in config file
svn path=/nixos/trunk/; revision=19386
supplied by the lvm package). This makes the "lvm" Upstart task
unnecessary. Also, we now get /dev/disk/by-{label,uuid} symlinks
for LVM logical disks.
svn path=/nixos/trunk/; revision=19300
because /proc/swaps contains resolved paths as well. Without this,
the swap device will be turned off again by the $unused code.
svn path=/nixos/trunk/; revision=19278
* Miss-interpretation of the --skip option of cryptsetup. Ciphered partition labels are not supported. Labels are erased when doing mkswap on the ciphered partition.
* Avoid doing swapon on devices which are already listed in /proc/swaps.
* Remove no longer listed devices with only one swapoff command.
svn path=/nixos/trunk/; revision=19164
* Assemble devices only if there is a new entry.
* Add 'new-raid-array' flag to assemble new arrays.
* Emit new-devices flag to triggers the 'filesystems' task.
svn path=/nixos/trunk/; revision=19145
statically configured interface (i.e. we're not running dhclient).
Otherwise the ntpd job won't be triggered.
* Use the "-n" flag of "initctl emit" to send the event
asynchronously.
svn path=/nixos/branches/upstart-0.6/; revision=18227
The continue keyword was previously used to mount the next device, but
the loop in has been removed. (see r17919)
svn path=/nixos/trunk/; revision=17973
style of declaring Upstart jobs. While at it, converted them to the
current NixOS module style and improved some option descriptions.
Hopefully I didn't break too much :-)
svn path=/nixos/trunk/; revision=17761
* Don't try to remount CIFS filesystems.
* For devices specified by label, use /dev/disk/by-label instead of
LABEL=. The initrd already did this.
* Improved the flagging of pseudo devices.
svn path=/nixos/trunk/; revision=17431
numbers. This also requires kbd and tty-backgrounds to be updated
(and by extension syslogd and rogue). Also updated the style of
those modules.
svn path=/nixos/trunk/; revision=17424
* Simplified the pre-start script of the network-interfaces module.
* Removed wireless support from the network-interfaces module. It
only worked for static WEP configurations anyway, and AFAIK nobody
used it.
svn path=/nixos/branches/modular-nixos/; revision=16406
ove QEMU (and other NixOS instances that use a remote filesystem like
NFS):
* Don't take down the network interfaces during shutdown.
* Don't try to unmount the Nix store. Usually, this doesn't work
because it's still in use, but on remote filesystems like CIFS the
`-f' umount flag actually works.
svn path=/nixos/branches/modular-nixos/; revision=16036
initialising network interfaces, etc.) to modules/tasks. This
follows the Upstart terminology: a service is a job that doesn't
usually terminate (e.g. a daemon), while a task is a job that does
some work and then exits.
svn path=/nixos/branches/modular-nixos/; revision=15771
