nixpkgs/pkgs/development/tools/build-managers/gnumake/log.patch

126 lines
3.5 KiB
Diff
Raw Normal View History

diff -rc make-3.81-orig/job.c make-3.81/job.c
*** make-3.81-orig/job.c 2006-03-20 04:03:04.000000000 +0100
--- make-3.81/job.c 2009-01-19 19:37:28.000000000 +0100
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
***************
*** 1083,1089 ****
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
appear. */
message (0, (just_print_flag || (!(flags & COMMANDS_SILENT) && !silent_flag))
! ? "%s" : (char *) 0, p);
/* Tell update_goal_chain that a command has been started on behalf of
this target. It is important that this happens here and not in
--- 1083,1089 ----
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
appear. */
message (0, (just_print_flag || (!(flags & COMMANDS_SILENT) && !silent_flag))
! ? (enable_nested_output ? "\e[3s\e[a%s\e[b" : "%s") : (char *) 0, p);
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
/* Tell update_goal_chain that a command has been started on behalf of
this target. It is important that this happens here and not in
diff -rc make-3.81-orig/main.c make-3.81/main.c
*** make-3.81-orig/main.c 2006-03-20 03:36:37.000000000 +0100
--- make-3.81/main.c 2009-01-19 19:41:41.000000000 +0100
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
***************
*** 886,891 ****
--- 886,900 ----
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
}
+ static void close_nesting()
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+ {
+ while (stdout_nesting_level--)
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+ printf("\e[q");
+ while (stderr_nesting_level--)
+ fprintf(stderr, "\e[q");
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+ }
+
+
#ifdef _AMIGA
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
int
main (int argc, char **argv)
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
***************
*** 931,936 ****
--- 940,950 ----
atexit (close_stdout);
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
#endif
+ atexit(close_nesting);
+
+ if (getenv("NIX_INDENT_MAKE"))
+ enable_nested_output = 1;
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+
/* Needed for OS/2 */
initialize_main(&argc, &argv);
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
***************
*** 3095,3100 ****
--- 3109,3120 ----
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
/* Use entire sentences to give the translators a fighting chance. */
+ if (entering && enable_nested_output)
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+ {
+ printf("\e[p");
+ stdout_nesting_level++;
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+ }
+
if (makelevel == 0)
if (starting_directory == 0)
if (entering)
***************
*** 3124,3129 ****
--- 3144,3159 ----
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
printf (_("%s[%u]: Leaving directory `%s'\n"),
program, makelevel, starting_directory);
+ if (!entering && enable_nested_output)
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+ {
+ printf("\e[q");
+ stdout_nesting_level--;
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+ }
+
/* Flush stdout to be sure this comes before any stderr output. */
fflush (stdout);
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
}
+
+ int enable_nested_output = 0;
+ int stdout_nesting_level = 0;
+ int stderr_nesting_level = 0;
diff -rc make-3.81-orig/make.h make-3.81/make.h
*** make-3.81-orig/make.h 2006-02-16 00:54:43.000000000 +0100
--- make-3.81/make.h 2009-01-19 19:32:03.000000000 +0100
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
***************
*** 609,611 ****
--- 609,614 ----
#define ENULLLOOP(_v,_c) do{ errno = 0; \
while (((_v)=_c)==0 && errno==EINTR); }while(0)
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
+ extern int enable_nested_output;
+ extern int stdout_nesting_level;
+ extern int stderr_nesting_level;
diff -rc make-3.81-orig/remake.c make-3.81/remake.c
*** make-3.81-orig/remake.c 2006-03-20 03:36:37.000000000 +0100
--- make-3.81/remake.c 2009-01-19 19:39:40.000000000 +0100
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
***************
*** 1120,1126 ****
--- 1120,1137 ----
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
/* The normal case: start some commands. */
if (!touch_flag || file->cmds->any_recurse)
{
+ if (enable_nested_output)
+ {
+ log_working_directory (1);
+ fprintf(stderr, "\e[pbuilding %s\n", file->name);
+ stderr_nesting_level++;
+ }
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
execute_file_commands (file);
+ if (enable_nested_output)
+ {
+ fprintf(stderr, "\e[q");
+ stderr_nesting_level--;
+ }
* The stdenv setup script now defines a generic builder that allows builders for typical Autoconf-style to be much shorten, e.g., . $stdenv/setup genericBuild The generic builder does lots of stuff automatically: - Unpacks source archives specified by $src or $srcs (it knows about gzip, bzip2, tar, zip, and unpacked source trees). - Determines the source tree. - Applies patches specified by $patches. - Fixes libtool not to search for libraries in /lib etc. - Runs `configure'. - Runs `make'. - Runs `make install'. - Strips debug information from static libraries. - Writes nested log information (in the format accepted by `log2xml'). There are also lots of hooks and variables to customise the generic builder. See `stdenv/generic/docs.txt'. * Adapted the base packages (i.e., the ones used by stdenv) to use the generic builder. * We now use `curl' instead of `wget' to download files in `fetchurl'. * Neither `curl' nor `wget' are part of stdenv. We shouldn't encourage people to download stuff in builders (impure!). * Updated some packages. * `buildinputs' is now `buildInputs' (but the old name also works). * `findInputs' in the setup script now prevents inputs from being processed multiple times (which could happen, e.g., if an input was a propagated input of several other inputs; this caused the size variables like $PATH to blow up exponentially in the worst case). * Patched GNU Make to write nested log information in the format accepted by `log2xml'. Also, prior to writing the build command, Make now writes a line `building X' to indicate what is being built. This is unfortunately often obscured by the gigantic tool invocations in many Makefiles. The actual build commands are marked `unimportant' so that they don't clutter pages generated by `log2html'. svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
return;
}