nixpkgs/doc/stdenv.xml

<chapter xmlns="http://docbook.org/ns/docbook"
         xmlns:xlink="http://www.w3.org/1999/xlink"
         xml:id="chap-stdenv">

<title>The Standard Environment</title>


<para>The standard build environment in the Nix Packages collection
provides an environment for building Unix packages that does a lot of
common build tasks automatically.  In fact, for Unix packages that use
the standard <literal>./configure; make; make install</literal> build
interface, you don’t need to write a build script at all; the standard
environment does everything automatically.  If
<literal>stdenv</literal> doesn’t do what you need automatically, you
can easily customise or override the various build phases.</para>


<section><title>Using <literal>stdenv</literal></title>

<para>To build a package with the standard environment, you use the
function <varname>stdenv.mkDerivation</varname>, instead of the
primitive built-in function <varname>derivation</varname>, e.g.

<programlisting>
stdenv.mkDerivation {
  name = "libfoo-1.2.3";
  src = fetchurl {
    url = http://example.org/libfoo-1.2.3.tar.bz2;
    md5 = "e1ec107956b6ddcb0b8b0679367e9ac9";
  };
}</programlisting>

(<varname>stdenv</varname> needs to be in scope, so if you write this
in a separate Nix expression from
<filename>pkgs/all-packages.nix</filename>, you need to pass it as a
function argument.)  Specifying a <varname>name</varname> and a
<varname>src</varname> is the absolute minimum you need to do.  Many
packages have dependencies that are not provided in the standard
environment.  It’s usually sufficient to specify those dependencies in
the <varname>buildInputs</varname> attribute:

<programlisting>
stdenv.mkDerivation {
  name = "libfoo-1.2.3";
  ...
  buildInputs = [libbar perl ncurses];
}</programlisting>

This attribute ensures that the <filename>bin</filename>
subdirectories of these packages appear in the <envar>PATH</envar>
environment variable during the build, that their
<filename>include</filename> subdirectories are searched by the C
compiler, and so on.  (See <xref linkend="ssec-setup-hooks"/> for
details.)</para>

<para>Often it is necessary to override or modify some aspect of the
build.  To make this easier, the standard environment breaks the
package build into a number of <emphasis>phases</emphasis>, all of
which can be overriden or modified individually: unpacking the
sources, applying patches, configuring, building, and installing.
(There are some others; see <xref linkend="ssec-stdenv-phases"/>.)
For instance, a package that doesn’t supply a makefile but instead has
to be compiled “manually” could be handled like this:

<programlisting>
stdenv.mkDerivation {
  name = "fnord-4.5";
  ...
  buildPhase = ''
    gcc foo.c -o foo
  '';
  installPhase = ''
    mkdir -p $out/bin
    cp foo $out/bin
  '';
}</programlisting>

(Note the use of <literal>''</literal>-style string literals, which
are very convenient for large multi-line script fragments because they
don’t need escaping of <literal>"</literal> and <literal>\</literal>,
and because indentation is intelligently removed.)</para>

<para>There are many other attributes to customise the build.  These
are listed in <xref linkend="ssec-stdenv-attributes"/>.</para>

<para>While the standard environment provides a generic builder, you
can still supply your own build script:

<programlisting>
stdenv.mkDerivation {
  name = "libfoo-1.2.3";
  ...
  builder = ./builder.sh;
}</programlisting>

where the builder can do anything it wants, but typically starts with

<programlisting>
source $stdenv/setup
</programlisting>

to let <literal>stdenv</literal> set up the environment (e.g., process
the <varname>buildInputs</varname>).  If you want, you can still use
<literal>stdenv</literal>’s generic builder:

<programlisting>
source $stdenv/setup

buildPhase() {
  echo "... this is my custom build phase ..."
  gcc foo.c -o foo
}

installPhase() {
  mkdir -p $out/bin
  cp foo $out/bin
}

genericBuild
</programlisting>

</para>

</section>


<section><title>Tools provided by <literal>stdenv</literal></title>

<para>The standard environment provides the following packages:

<itemizedlist>

  <listitem><para>The GNU C Compiler, configured with C and C++
  support.</para></listitem>

  <listitem><para>GNU coreutils (contains a few dozen standard Unix
  commands).</para></listitem>

  <listitem><para>GNU findutils (contains
  <command>find</command>).</para></listitem>

  <listitem><para>GNU diffutils (contains <command>diff</command>,
  <command>cmp</command>).</para></listitem>

  <listitem><para>GNU <command>sed</command>.</para></listitem>

  <listitem><para>GNU <command>grep</command>.</para></listitem>

  <listitem><para>GNU <command>awk</command>.</para></listitem>

  <listitem><para>GNU <command>tar</command>.</para></listitem>

  <listitem><para><command>gzip</command> and
  <command>bzip2</command>.</para></listitem>

  <listitem><para>GNU Make.  It has been patched to provide
  <quote>nested</quote> output that can be fed into the
  <command>nix-log2xml</command> command and
  <command>log2html</command> stylesheet to create a structured,
  readable output of the build steps performed by
  Make.</para></listitem>

  <listitem><para>Bash.  This is the shell used for all builders in
  the Nix Packages collection.  Not using <command>/bin/sh</command>
  removes a large source of portability problems.</para></listitem>

  <listitem><para>The <command>patch</command>
  command.</para></listitem>

</itemizedlist>

</para>

<para>On Linux, <literal>stdenv</literal> also includes the
<command>patchelf</command> utility.</para>

</section>


<section xml:id="ssec-stdenv-attributes"><title>Attributes</title>

<variablelist>
  <title>Variables affecting <literal>stdenv</literal>
  initialisation</title>

  <varlistentry>
    <term><varname>NIX_DEBUG</varname></term>
    <listitem><para>If set, <literal>stdenv</literal> will print some
    debug information during the build.  In particular, the
    <command>gcc</command> and <command>ld</command> wrapper scripts
    will print out the complete command line passed to the wrapped
    tools.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>buildInputs</varname></term>
    <listitem><para>A list of dependencies used by
    <literal>stdenv</literal> to set up the environment for the build.
    For each dependency <replaceable>dir</replaceable>, the directory
    <filename><replaceable>dir</replaceable>/bin</filename>, if it
    exists, is added to the <envar>PATH</envar> environment variable.
    Other environment variables are also set up via a pluggable
    mechanism.  For instance, if <varname>buildInputs</varname>
    contains Perl, then the <filename>lib/site_perl</filename>
    subdirectory of each input is added to the <envar>PERL5LIB</envar>
    environment variable.  See <xref linkend="ssec-setup-hooks"/> for
    details.</para></listitem>
  </varlistentry>
  
  <varlistentry>
    <term><varname>propagatedBuildInputs</varname></term>
    <listitem><para>Like <varname>buildInputs</varname>, but these
    dependencies are <emphasis>propagated</emphasis>: that is, the
    dependencies listed here are added to the
    <varname>buildInputs</varname> of any package that uses
    <emphasis>this</emphasis> package as a dependency.  So if package
    Y has <literal>propagatedBuildInputs = [X]</literal>, and package
    Z has <literal>buildInputs = [Y]</literal>, then package X will
    appear in Z’s build environment automatically.</para></listitem>
  </varlistentry>
  

</variablelist>

</section>


<section xml:id="ssec-stdenv-phases"><title>Phases</title>

<para>The generic builder has a number of <emphasis>phases</emphasis>.
Package builds are split into phases to make it easier to override
specific parts of the build (e.g., unpacking the sources or installing
the binaries).  Furthermore, it allows a nicer presentation of build
logs in the Nix build farm.</para>

<para>Each phase can be overriden in its entirety either by setting
the environment variable
<varname><replaceable>name</replaceable>Phase</varname> to a string
containing some shell commands to be executed, or by redefining the
shell function
<varname><replaceable>name</replaceable>Phase</varname>.  The former
is convenient to override a phase from the derivation, while the
latter is convenient from a build script.</para>


<section><title>Controlling phases</title>

<para>There are a number of variables that control what phases are
executed and in what order:

<variablelist>
  <title>Variables affecting phase control</title>

  <varlistentry>
    <term><varname>phases</varname></term>
    <listitem>
      <para>Specifies the phases.  You can change the order in which
      phases are executed, or add new phases, by setting this
      variable.  If it’s not set, the default value is used, which is
      <literal>$prePhases unpackPhase patchPhase $preConfigurePhases
      configurePhase $preBuildPhases buildPhase checkPhase
      $preInstallPhases installPhase fixupPhase $preDistPhases
      distPhase $postPhases</literal>.
      </para>
      
      <para>Usually, if you just want to add a few phases, it’s more
      convenient to set one of the variables below (such as
      <varname>preInstallPhases</varname>), as you then don’t specify
      all the normal phases.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>prePhases</varname></term>
    <listitem>
      <para>Additional phases executed before any of the default phases.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preConfigurePhases</varname></term>
    <listitem>
      <para>Additional phases executed just before the configure phase.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preBuildPhases</varname></term>
    <listitem>
      <para>Additional phases executed just before the build phase.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preInstallPhases</varname></term>
    <listitem>
      <para>Additional phases executed just before the install phase.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preDistPhases</varname></term>
    <listitem>
      <para>Additional phases executed just before the distribution phase.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postPhases</varname></term>
    <listitem>
      <para>Additional phases executed after any of the default
      phases.</para>
    </listitem>
  </varlistentry>

</variablelist>

</para>

</section>


<section><title>The unpack phase</title>

<para>The unpack phase is responsible for unpacking the source code of
the package.  The default implementation of
<function>unpackPhase</function> unpacks the source files listed in
the <envar>src</envar> environment variable to the current directory.
It supports the following files by default:

<variablelist>

  <varlistentry>
    <term>Tar files</term>
    <listitem><para>These can optionally be compressed using
    <command>gzip</command> (<filename>.tar.gz</filename>,
    <filename>.tgz</filename> or <filename>.tar.Z</filename>) or
    <command>bzip2</command> (<filename>.tar.bz2</filename> or
    <filename>.tbz2</filename>).</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>Zip files</term>
    <listitem><para>Zip files are unpacked using
    <command>unzip</command>.  However, <command>unzip</command> is
    not in the standard environment, so you should add it to
    <varname>buildInputs</varname> yourself.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>Directories in the Nix store</term>
    <listitem><para>These are simply copied to the current directory.
    The hash part of the file name is stripped,
    e.g. <filename>/nix/store/1wydxgby13cz...-my-sources</filename>
    would be copied to
    <filename>my-sources</filename>.</para></listitem>
  </varlistentry>

</variablelist>

Additional file types can be supported by setting the
<varname>unpackCmd</varname> variable (see below).</para>

<para></para>

<variablelist>
  <title>Variables controlling the unpack phase</title>

  <varlistentry>
    <term><varname>srcs</varname> / <varname>src</varname></term>
    <listitem><para>The list of source files or directories to be
    unpacked or copied.  One of these must be set.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>sourceRoot</varname></term>
    <listitem><para>After running <function>unpackPhase</function>,
    the generic builder changes the current directory to the directory
    created by unpacking the sources.  If there are multiple source
    directories, you should set <varname>sourceRoot</varname> to the
    name of the intended directory.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>setSourceRoot</varname></term>
    <listitem><para>Alternatively to setting
    <varname>sourceRoot</varname>, you can set
    <varname>setSourceRoot</varname> to a shell command to be
    evaluated by the unpack phase after the sources have been
    unpacked.  This command must set
    <varname>sourceRoot</varname>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preUnpack</varname></term>
    <listitem><para>Hook executed at the start of the unpack
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postUnpack</varname></term>
    <listitem><para>Hook executed at the end of the unpack
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>dontMakeSourcesWritable</varname></term>
    <listitem><para>If set to <literal>1</literal>, the unpacked
    sources are <emphasis>not</emphasis> made
    writable.  By default, they are made writable to prevent problems
    with read-only sources.  For example, copied store directories
    would be read-only without this.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>unpackCmd</varname></term>
    <listitem><para>The unpack phase evaluates the string
    <literal>$unpackCmd</literal> for any unrecognised file.  The path
    to the current source file is contained in the
    <varname>curSrc</varname> variable.</para></listitem>
  </varlistentry>

</variablelist>

</section>


<section><title>The patch phase</title>

<para>The patch phase applies the list of patches defined in the
<varname>patches</varname> variable.</para>

<variablelist>
  <title>Variables controlling the patch phase</title>

  <varlistentry>
    <term><varname>patches</varname></term>
    <listitem><para>The list of patches.  They must be in the format
    accepted by the <command>patch</command> command, and may
    optionally be compressed using <command>gzip</command>
    (<filename>.gz</filename>) or <command>bzip2</command>
    (<filename>.bz2</filename>).</para></listitem>
  </varlistentry>  

  <varlistentry>
    <term><varname>patchFlags</varname></term>
    <listitem><para>Flags to be passed to <command>patch</command>.
    If not set, the argument <option>-p1</option> is used, which
    causes the leading directory component to be stripped from the
    file names in each patch.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>prePatch</varname></term>
    <listitem><para>Hook executed at the start of the patch
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postPatch</varname></term>
    <listitem><para>Hook executed at the end of the patch
    phase.</para></listitem>
  </varlistentry>

</variablelist>

</section>


<section><title>The configure phase</title>

<para>The configure phase prepares the source tree for building.  The
default <function>configurePhase</function> runs
<filename>./configure</filename> (typically an Autoconf-generated
script) if it exists.</para>

<variablelist>
  <title>Variables controlling the configure phase</title>

  <varlistentry>
    <term><varname>configureScript</varname></term>
    <listitem><para>The name of the configure script.  It defaults to
    <filename>./configure</filename> if it exists; otherwise, the
    configure phase is skipped.  This can actually be a command (like
    <literal>perl ./Configure.pl</literal>).</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>configureFlags</varname></term>
    <listitem><para>Additional arguments passed to the configure
    script.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>configureFlagsArray</varname></term>
    <listitem><para>A shell array containing additional arguments
    passed to the configure script.  You must use this instead of
    <varname>configureFlags</varname> if the arguments contain
    spaces.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>dontAddPrefix</varname></term>
    <listitem><para>By default, the flag
    <literal>--prefix=$prefix</literal> is added to the configure
    flags.  If this is undesirable, set this variable to a non-empty
    value.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>prefix</varname></term>
    <listitem><para>The prefix under which the package must be
    installed, passed via the <option>--prefix</option> option to the
    configure script.  It defaults to
    <option>$out</option>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>dontAddDisableDepTrack</varname></term>
    <listitem><para>By default, the flag
    <literal>--disable-dependency-tracking</literal> is added to the
    configure flags to speed up Automake-based builds.  If this is
    undesirable, set this variable to a non-empty
    value.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>dontFixLibtool</varname></term>
    <listitem><para>By default, the configure phase applies some
    special hackery to all files called <filename>ltmain.sh</filename>
    before running the configure script in order to improve the purity
    of Libtool-based packages<footnote><para>It clears the
    <varname>sys_lib_<replaceable>*</replaceable>search_path</varname>
    variables in the Libtool script to prevent Libtool from using
    libraries in <filename>/usr/lib</filename> and
    such.</para></footnote>.  If this is undesirable, set this
    variable to a non-empty value.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preConfigure</varname></term>
    <listitem><para>Hook executed at the start of the configure
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postConfigure</varname></term>
    <listitem><para>Hook executed at the end of the configure
    phase.</para></listitem>
  </varlistentry>

</variablelist>


</section>


<section><title>The build phase</title>

<para>The build phase is responsible for actually building the package
(e.g. compiling it).  The default <function>buildPhase</function>
simply calls <command>make</command> if a file named
<filename>Makefile</filename>, <filename>makefile</filename> or
<filename>GNUmakefile</filename> exists in the current directory (or
the <varname>makefile</varname> is explicitly set); otherwise it does
nothing.</para>

<variablelist>
  <title>Variables controlling the build phase</title>

  <varlistentry>
    <term><varname>dontBuild</varname></term>
    <listitem><para>Set to true to skip the build phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>makefile</varname></term>
    <listitem><para>The file name of the Makefile.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>makeFlags</varname></term>
    <listitem><para>Additional flags passed to
    <command>make</command>.  These flags are also used by the default
    install and check phase.  For setting make flags specific to the
    build phase, use <varname>buildFlags</varname> (see
    below).</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>makeFlagsArray</varname></term>
    <listitem><para>A shell array containing additional arguments
    passed to <command>make</command>.  You must use this instead of
    <varname>makeFlags</varname> if the arguments contain
    spaces, e.g.

<programlisting>
makeFlagsArray=(CFLAGS="-O0 -g" LDFLAGS="-lfoo -lbar")
</programlisting>

    Note that shell arrays cannot be passed through environment
    variables, so you cannot set <varname>makeFlagsArray</varname> in
    a derivation attribute (because those are passed through
    environment variables): you have to define them in shell
    code.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>buildFlags</varname> / <varname>buildFlagsArray</varname></term>
    <listitem><para>Additional flags passed to
    <command>make</command>.  Like <varname>makeFlags</varname> and
    <varname>makeFlagsArray</varname>, but only used by the build
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preBuild</varname></term>
    <listitem><para>Hook executed at the start of the build
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postBuild</varname></term>
    <listitem><para>Hook executed at the end of the build
    phase.</para></listitem>
  </varlistentry>

</variablelist>


<para> 
You can set flags for <command>make</command> through the
<varname>makeFlags</varname> variable.</para>

<para>Before and after running <command>make</command>, the hooks
<varname>preBuild</varname> and <varname>postBuild</varname> are
called, respectively.</para>

</section>


<section><title>The check phase</title>

<para>The check phase checks whether the package was built correctly
by running its test suite.  The default
<function>checkPhase</function> calls <command>make check</command>,
but only if the <varname>doCheck</varname> variable is enabled.</para>

<variablelist>
  <title>Variables controlling the check phase</title>

  <varlistentry>
    <term><varname>doCheck</varname></term>
    <listitem><para>If set to a non-empty string, the check phase is
    executed, otherwise it is skipped (default).  Thus you should set

    <programlisting>
doCheck = true;</programlisting>

    in the derivation to enable checks.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>makeFlags</varname> /
    <varname>makeFlagsArray</varname> /
    <varname>makefile</varname></term>
    <listitem><para>See the build phase for details.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>checkTarget</varname></term>
    <listitem><para>The make target that runs the tests.  Defaults to
    <literal>check</literal>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>checkFlags</varname> / <varname>checkFlagsArray</varname></term>
    <listitem><para>Additional flags passed to
    <command>make</command>.  Like <varname>makeFlags</varname> and
    <varname>makeFlagsArray</varname>, but only used by the check
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preCheck</varname></term>
    <listitem><para>Hook executed at the start of the check
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postCheck</varname></term>
    <listitem><para>Hook executed at the end of the check
    phase.</para></listitem>
  </varlistentry>

</variablelist>

  
</section>


<section><title>The install phase</title>

<para>The install phase is responsible for installing the package in
the Nix store under <envar>out</envar>.  The default
<function>installPhase</function> creates the directory
<literal>$out</literal> and calls <command>make
install</command>.</para>

<variablelist>
  <title>Variables controlling the check phase</title>

  <varlistentry>
    <term><varname>makeFlags</varname> /
    <varname>makeFlagsArray</varname> /
    <varname>makefile</varname></term>
    <listitem><para>See the build phase for details.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>installTargets</varname></term>
    <listitem><para>The make targets that perform the installation.
    Defaults to <literal>install</literal>.  Example:

<programlisting>
installTargets = "install-bin install-doc";</programlisting>

    </para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>installFlags</varname> / <varname>installFlagsArray</varname></term>
    <listitem><para>Additional flags passed to
    <command>make</command>.  Like <varname>makeFlags</varname> and
    <varname>makeFlagsArray</varname>, but only used by the install
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preInstall</varname></term>
    <listitem><para>Hook executed at the start of the install
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postInstall</varname></term>
    <listitem><para>Hook executed at the end of the install
    phase.</para></listitem>
  </varlistentry>

</variablelist>


</section>


<section><title>The fixup phase</title>

<para>The fixup phase performs some (Nix-specific) post-processing
actions on the files installed under <filename>$out</filename> by the
install phase.  The default <function>fixupPhase</function> does the
following:

<itemizedlist>
      
  <listitem><para>It moves the <filename>man/</filename>,
  <filename>doc/</filename> and <filename>info/</filename>
  subdirectories of <envar>$out</envar> to
  <filename>share/</filename>.</para></listitem>
      
  <listitem><para>It strips libraries and executables of debug
  information.</para></listitem>

  <listitem><para>On Linux, it applies the <command>patchelf</command>
  command to ELF executables and libraries to remove unused
  directories from the <literal>RPATH</literal> in order to prevent
  unnecessary runtime dependencies.</para></listitem>

  <listitem><para>It rewrites the interpreter paths of shell scripts
  to paths found in <envar>PATH</envar>.  E.g.,
  <filename>/usr/bin/perl</filename> will be rewritten to
  <filename>/nix/store/<replaceable>some-perl</replaceable>/bin/perl</filename>
  found in <envar>PATH</envar>.</para></listitem>

</itemizedlist>

</para>

<variablelist>
  <title>Variables controlling the check phase</title>

  <varlistentry>
    <term><varname>dontStrip</varname></term>
    <listitem><para>If set, libraries and executables are not
    stripped.  By default, they are.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>stripAllList</varname></term>
    <listitem><para>List of directories to search for libraries and
    executables from which <emphasis>all</emphasis> symbols should be
    stripped.  By default, it’s empty.  Stripping all symbols is
    risky, since it may remove not just debug symbols but also ELF
    information necessary for normal execution.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>stripAllFlags</varname></term>
    <listitem><para>Flags passed to the <command>strip</command>
    command applied to the files in the directories listed in
    <varname>stripAllList</varname>.  Defaults to <option>-s</option>
    (i.e. <option>--strip-all</option>).</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>stripDebugList</varname></term>
    <listitem><para>List of directories to search for libraries and
    executables from which only debugging-related symbols should be
    stripped.  It defaults to <literal>lib bin
    sbin</literal>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>stripDebugFlags</varname></term>
    <listitem><para>Flags passed to the <command>strip</command>
    command applied to the files in the directories listed in
    <varname>stripDebugList</varname>.  Defaults to
    <option>-S</option>
    (i.e. <option>--strip-debug</option>).</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>dontPatchELF</varname></term>
    <listitem><para>If set, the <command>patchelf</command> command is
    not used to remove unnecessary <literal>RPATH</literal> entries.
    Only applies to Linux.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>dontPatchShebangs</varname></term>
    <listitem><para>If set, scripts starting with
    <literal>#!</literal> do not have their interpreter paths
    rewritten to paths in the Nix store.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>forceShare</varname></term>
    <listitem><para>The list of directories that must be moved from
    <filename>$out</filename> to <filename>$out/share</filename>.
    Defaults to <literal>man doc info</literal>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>setupHook</varname></term>
    <listitem><para>A package can export a <link
    linkend="ssec-setup-hooks">setup hook</link> by setting this
    variable.  The setup hook, if defined, is copied to
    <filename>$out/nix-support/setup-hook</filename>.  Environment
    variables are then substituted in it using <function
    linkend="fun-substituteAll">substituteAll</function>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preFixup</varname></term>
    <listitem><para>Hook executed at the start of the fixup
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postFixup</varname></term>
    <listitem><para>Hook executed at the end of the fixup
    phase.</para></listitem>
  </varlistentry>

</variablelist>

</section>


<section><title>The distribution phase</title>

<para>The distribution phase is intended to produce a source
distribution of the package.  The default
<function>distPhase</function> first calls <command>make
dist</command>, then it copies the resulting source tarballs to
<filename>$out/tarballs/</filename>.  This phase is only executed if
the attribute <varname>doDist</varname> is set.</para>

<variablelist>
  <title>Variables controlling the distribution phase</title>

  <varlistentry>
    <term><varname>distTarget</varname></term>
    <listitem><para>The make target that produces the distribution.
    Defaults to <literal>dist</literal>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>distFlags</varname> / <varname>distFlagsArray</varname></term>
    <listitem><para>Additional flags passed to
    <command>make</command>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>tarballs</varname></term>
    <listitem><para>The names of the source distribution files to be
    copied to <filename>$out/tarballs/</filename>.  It can contain
    shell wildcards.  The default is
    <filename>*.tar.gz</filename>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>dontCopyDist</varname></term>
    <listitem><para>If set, no files are copied to
    <filename>$out/tarballs/</filename>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>preDist</varname></term>
    <listitem><para>Hook executed at the start of the distribution
    phase.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term><varname>postDist</varname></term>
    <listitem><para>Hook executed at the end of the distribution
    phase.</para></listitem>
  </varlistentry>

</variablelist>


</section>


</section>


<section xml:id="ssec-stdenv-functions"><title>Shell functions</title>

<para>The standard environment provides a number of useful
functions.</para>

<variablelist>

  
  <varlistentry xml:id='fun-substitute'>
    <term><function>substitute</function>
    <replaceable>infile</replaceable>
    <replaceable>outfile</replaceable>
    <replaceable>subs</replaceable></term>
    
    <listitem>
      <para>Performs string substitution on the contents of
      <replaceable>infile</replaceable>, writing the result to
      <replaceable>outfile</replaceable>.  The substitutions in
      <replaceable>subs</replaceable> are of the following form:

        <variablelist>
          <varlistentry>
            <term><option>--replace</option>
            <replaceable>s1</replaceable>
            <replaceable>s2</replaceable></term>
            <listitem><para>Replace every occurence of the string
            <replaceable>s1</replaceable> by
            <replaceable>s2</replaceable>.</para></listitem>
          </varlistentry>

          <varlistentry>
            <term><option>--subst-var</option>
            <replaceable>varName</replaceable></term>
            <listitem><para>Replace every occurence of
            <literal>@<replaceable>varName</replaceable>@</literal> by
            the contents of the environment variable
            <replaceable>varName</replaceable>.  This is useful for
            generating files from templates, using
            <literal>@<replaceable>...</replaceable>@</literal> in the
            template as placeholders.</para></listitem>
          </varlistentry>
          
          <varlistentry>
            <term><option>--subst-var-by</option>
            <replaceable>varName</replaceable>
            <replaceable>s</replaceable></term>
            <listitem><para>Replace every occurence of
            <literal>@<replaceable>varName</replaceable>@</literal> by
            the string <replaceable>s</replaceable>.</para></listitem>
          </varlistentry>
          
        </variablelist>

      </para>

      <para>Example:

<programlisting>
substitute ./foo.in ./foo.out \
    --replace /usr/bin/bar $bar/bin/bar \
    --replace "a string containing spaces" "some other text" \
    --subst-var someVar
</programlisting>

      </para>

      <para><function>substitute</function> is implemented using the
      <command
      xlink:href="http://replace.richardlloyd.org.uk/">replace</command>
      command.  Unlike with the <command>sed</command> command, you
      don’t have to worry about escaping special characters.  It
      supports performing substitutions on binary files (such as
      executables), though there you’ll probably want to make sure
      that the replacement string is as long as the replaced
      string.</para>

    </listitem>
  </varlistentry>
  

  <varlistentry xml:id='fun-substituteInPlace'>
    <term><function>substituteInPlace</function>
    <replaceable>file</replaceable>
    <replaceable>subs</replaceable></term>
    <listitem><para>Like <function>substitute</function>, but performs
    the substitutions in place on the file
    <replaceable>file</replaceable>.</para></listitem>
  </varlistentry>

  
  <varlistentry xml:id='fun-substituteAll'>
    <term><function>substituteAll</function>
    <replaceable>infile</replaceable>
    <replaceable>outfile</replaceable></term>
    <listitem><para>Replaces every occurence of
    <literal>@<replaceable>varName</replaceable>@</literal>, where
    <replaceable>varName</replaceable> is any environment variable, in
    <replaceable>infile</replaceable>, writing the result to
    <replaceable>outfile</replaceable>.  For instance, if
    <replaceable>infile</replaceable> has the contents

<programlisting>
#! @bash@/bin/sh
PATH=@coreutils@/bin
echo @foo@
</programlisting>

    and the environment contains
    <literal>bash=/nix/store/bmwp0q28cf21...-bash-3.2-p39</literal>
    and
    <literal>coreutils=/nix/store/68afga4khv0w...-coreutils-6.12</literal>,
    but does not contain the variable <varname>foo</varname>, then the
    output will be

<programlisting>
#! /nix/store/bmwp0q28cf21...-bash-3.2-p39/bin/sh
PATH=/nix/store/68afga4khv0w...-coreutils-6.12/bin
echo @foo@
</programlisting>

    That is, no substitution is performed for undefined variables.</para></listitem>
  </varlistentry>


  <varlistentry xml:id='fun-substituteAllInPlace'>
    <term><function>substituteAllInPlace</function>
    <replaceable>file</replaceable></term>
    <listitem><para>Like <function>substituteAll</function>, but performs
    the substitutions in place on the file
    <replaceable>file</replaceable>.</para></listitem>
  </varlistentry>


  <varlistentry xml:id='fun-stripHash'>
    <term><function>stripHash</function>
    <replaceable>path</replaceable></term>
    <listitem><para>Strips the directory and hash part of a store
    path, and prints (on standard output) only the name part.  For
    instance, <literal>stripHash
    /nix/store/68afga4khv0w...-coreutils-6.12</literal> print
    <literal>coreutils-6.12</literal>.</para></listitem>
  </varlistentry>

  
</variablelist>

</section>


<section xml:id="ssec-setup-hooks"><title>Package setup hooks</title>

<para>The following packages provide a setup hook:

<variablelist>

  <varlistentry>
    <term>GCC wrapper</term>
    <listitem><para>Adds the <filename>include</filename> subdirectory
    of each build input to the <envar>NIX_CFLAGS_COMPILE</envar>
    environment variable, and the <filename>lib</filename> and
    <filename>lib64</filename> subdirectories to
    <envar>NIX_LDFLAGS</envar>.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>Perl</term>
    <listitem><para>Adds the <filename>lib/site_perl</filename> subdirectory
    of each build input to the <envar>PERL5LIB</envar>
    environment variable.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>Python</term>
    <listitem><para>Adds the
    <filename>lib/python2.5/site-packages</filename> subdirectory of
    each build input to the <envar>PYTHONPATH</envar> environment
    variable.</para>

    <note><para>This should be generalised: the Python version
    shouldn’t be hard-coded.</para></note></listitem>
  </varlistentry>

  <varlistentry>
    <term>pkg-config</term>
    <listitem><para>Adds the <filename>lib/pkgconfig</filename> and
    <filename>share/pkgconfig</filename> subdirectories of each
    build input to the <envar>PKG_CONFIG_PATH</envar> environment
    variable.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>Automake</term>
    <listitem><para>Adds the <filename>share/aclocal</filename>
    subdirectory of each build input to the <envar>ACLOCAL_PATH</envar>
    environment variable.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>libxml2</term>
    <listitem><para>Adds every file named
    <filename>catalog.xml</filename> found under the
    <filename>xml/dtd</filename> and <filename>xml/xsl</filename>
    subdirectories of each build input to the
    <envar>XML_CATALOG_FILES</envar> environment
    variable.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>teTeX / TeX Live</term>
    <listitem><para>Adds the <filename>share/texmf-nix</filename>
    subdirectory of each build input to the <envar>TEXINPUTS</envar>
    environment variable.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>Qt</term>
    <listitem><para>Sets the <envar>QTDIR</envar> environment variable
    to Qt’s path.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>gdk-pixbuf</term>
    <listitem><para>Exports <envvar>GDK_PIXBUF_MODULE_FILE</envvar>
    environment variable the the builder. Add librsvg package
    to <varname>buildInputs</varname> to get svg support.</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>GHC</term>
    <listitem><para>Creates a temporary package database and registers
    every Haskell build input in it (TODO: how?).</para></listitem>
  </varlistentry>

  <varlistentry>
    <term>GStreamer</term>
    <listitem><para>Adds the
    GStreamer plugins subdirectory of
    each build input to the <envar>GST_PLUGIN_SYSTEM_PATH_1_0</envar> or
    <envar>GST_PLUGIN_SYSTEM_PATH</envar> environment variable.</para>
  </varlistentry>

</variablelist>

</para>

</section>


<section><title>Purity in Nixpkgs</title>

<para>[measures taken to prevent dependencies on packages outside the
store, and what you can do to prevent them]</para>

<para>GCC doesn't search in locations such as
<filename>/usr/include</filename>.  In fact, attempts to add such
directories through the <option>-I</option> flag are filtered out.
Likewise, the linker (from GNU binutils) doesn't search in standard
locations such as <filename>/usr/lib</filename>.  Programs built on
Linux are linked against a GNU C Library that likewise doesn't search
in the default system locations.</para>

</section>


</chapter>