* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
diff -rc make-3.80-orig/job.c make-3.80/job.c
|
|
|
|
|
*** make-3.80-orig/job.c 2002-08-10 03:27:17.000000000 +0200
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- make-3.80/job.c 2004-04-02 17:38:04.000000000 +0200
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
***************
|
|
|
|
|
*** 987,993 ****
|
|
|
|
|
appear. */
|
|
|
|
|
|
|
|
|
|
message (0, (just_print_flag || (!(flags & COMMANDS_SILENT) && !silent_flag))
|
|
|
|
|
! ? "%s" : (char *) 0, p);
|
|
|
|
|
|
|
|
|
|
/* Tell update_goal_chain that a command has been started on behalf of
|
|
|
|
|
this target. It is important that this happens here and not in
|
|
|
|
|
--- 987,993 ----
|
|
|
|
|
appear. */
|
|
|
|
|
|
|
|
|
|
message (0, (just_print_flag || (!(flags & COMMANDS_SILENT) && !silent_flag))
|
|
|
|
|
! ? "\e[3s\e[a%s\e[b" : (char *) 0, p);
|
|
|
|
|
|
|
|
|
|
/* Tell update_goal_chain that a command has been started on behalf of
|
|
|
|
|
this target. It is important that this happens here and not in
|
|
|
|
|
diff -rc make-3.80-orig/main.c make-3.80/main.c
|
|
|
|
|
*** make-3.80-orig/main.c 2002-08-10 03:27:17.000000000 +0200
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- make-3.80/main.c 2004-04-02 17:42:50.000000000 +0200
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
***************
|
|
|
|
|
*** 254,259 ****
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- 254,263 ----
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
they appear out of date or not. */
|
|
|
|
|
|
|
|
|
|
int always_make_flag = 0;
|
|
|
|
|
+
|
2004-04-02 19:45:20 +02:00
|
|
|
|
+ int logNestingStdout = 0;
|
|
|
|
|
+ int logNestingStderr = 0;
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
+
|
|
|
|
|
|
|
|
|
|
/* The usage output. We write it this way to make life easier for the
|
|
|
|
|
translators, especially those trying to translate to right-to-left
|
|
|
|
|
***************
|
|
|
|
|
*** 827,832 ****
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- 831,845 ----
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+ static void closeNesting()
|
|
|
|
|
+ {
|
2004-04-02 19:45:20 +02:00
|
|
|
|
+ while (logNestingStdout--)
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
+ printf("\e[q");
|
2004-04-02 19:45:20 +02:00
|
|
|
|
+ while (logNestingStderr--)
|
|
|
|
|
+ fprintf(stderr, "\e[q");
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
+ }
|
|
|
|
|
+
|
|
|
|
|
+
|
|
|
|
|
#ifndef _AMIGA
|
|
|
|
|
int
|
|
|
|
|
main (argc, argv, envp)
|
|
|
|
|
***************
|
|
|
|
|
*** 854,859 ****
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- 867,874 ----
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
no_default_sh_exe = 1;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
+ atexit(closeNesting);
|
|
|
|
|
+
|
|
|
|
|
default_goal_file = 0;
|
|
|
|
|
reading_file = 0;
|
|
|
|
|
|
|
|
|
|
***************
|
|
|
|
|
*** 2782,2787 ****
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- 2797,2808 ----
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
|
|
|
|
|
/* Use entire sentences to give the translators a fighting chance. */
|
|
|
|
|
|
|
|
|
|
+ if (entering)
|
|
|
|
|
+ {
|
|
|
|
|
+ printf("\e[p");
|
2004-04-02 19:45:20 +02:00
|
|
|
|
+ logNestingStdout++;
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
+ }
|
|
|
|
|
+
|
|
|
|
|
if (makelevel == 0)
|
|
|
|
|
if (starting_directory == 0)
|
|
|
|
|
if (entering)
|
|
|
|
|
***************
|
|
|
|
|
*** 2810,2813 ****
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- 2831,2840 ----
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
else
|
|
|
|
|
printf (_("%s[%u]: Leaving directory `%s'\n"),
|
|
|
|
|
program, makelevel, starting_directory);
|
|
|
|
|
+
|
|
|
|
|
+ if (!entering)
|
|
|
|
|
+ {
|
|
|
|
|
+ printf("\e[q");
|
2004-04-02 19:45:20 +02:00
|
|
|
|
+ logNestingStdout--;
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
+ }
|
|
|
|
|
}
|
|
|
|
|
diff -rc make-3.80-orig/make.h make-3.80/make.h
|
|
|
|
|
*** make-3.80-orig/make.h 2002-09-11 18:55:44.000000000 +0200
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- make-3.80/make.h 2004-04-02 17:42:15.000000000 +0200
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
***************
|
|
|
|
|
*** 559,562 ****
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- 559,567 ----
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
extern int atomic_stat PARAMS ((const char *file, struct stat *buf));
|
|
|
|
|
extern struct dirent *atomic_readdir PARAMS ((DIR *dir));
|
|
|
|
|
|
|
|
|
|
+
|
|
|
|
|
#endif
|
|
|
|
|
+
|
|
|
|
|
+
|
2004-04-02 19:45:20 +02:00
|
|
|
|
+ extern int logNestingStdout;
|
|
|
|
|
+ extern int logNestingStderr;
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
diff -rc make-3.80-orig/remake.c make-3.80/remake.c
|
|
|
|
|
*** make-3.80-orig/remake.c 2002-08-08 02:11:19.000000000 +0200
|
2004-04-02 19:45:20 +02:00
|
|
|
|
--- make-3.80/remake.c 2004-04-02 17:43:00.000000000 +0200
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
***************
|
|
|
|
|
*** 1049,1055 ****
|
|
|
|
|
--- 1049,1059 ----
|
|
|
|
|
/* The normal case: start some commands. */
|
|
|
|
|
if (!touch_flag || file->cmds->any_recurse)
|
|
|
|
|
{
|
2004-04-02 19:45:20 +02:00
|
|
|
|
+ fprintf(stderr, "\e[pbuilding %s", file->name);
|
|
|
|
|
+ logNestingStderr++;
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
execute_file_commands (file);
|
2004-04-02 19:45:20 +02:00
|
|
|
|
+ fprintf(stderr, "\e[q");
|
|
|
|
|
+ logNestingStderr--;
|
* The stdenv setup script now defines a generic builder that allows
builders for typical Autoconf-style to be much shorten, e.g.,
. $stdenv/setup
genericBuild
The generic builder does lots of stuff automatically:
- Unpacks source archives specified by $src or $srcs (it knows about
gzip, bzip2, tar, zip, and unpacked source trees).
- Determines the source tree.
- Applies patches specified by $patches.
- Fixes libtool not to search for libraries in /lib etc.
- Runs `configure'.
- Runs `make'.
- Runs `make install'.
- Strips debug information from static libraries.
- Writes nested log information (in the format accepted by
`log2xml').
There are also lots of hooks and variables to customise the generic
builder. See `stdenv/generic/docs.txt'.
* Adapted the base packages (i.e., the ones used by stdenv) to use the
generic builder.
* We now use `curl' instead of `wget' to download files in `fetchurl'.
* Neither `curl' nor `wget' are part of stdenv. We shouldn't
encourage people to download stuff in builders (impure!).
* Updated some packages.
* `buildinputs' is now `buildInputs' (but the old name also works).
* `findInputs' in the setup script now prevents inputs from being
processed multiple times (which could happen, e.g., if an input was
a propagated input of several other inputs; this caused the size
variables like $PATH to blow up exponentially in the worst case).
* Patched GNU Make to write nested log information in the format
accepted by `log2xml'. Also, prior to writing the build command,
Make now writes a line `building X' to indicate what is being
built. This is unfortunately often obscured by the gigantic tool
invocations in many Makefiles. The actual build commands are marked
`unimportant' so that they don't clutter pages generated by
`log2html'.
svn path=/nixpkgs/trunk/; revision=845
2004-03-19 17:53:04 +01:00
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|